Ticket #10978: log_last.txt

File log_last.txt, 7.4 KB (added by lembo25@…, 5 years ago)

This is log with trunk version. Everything ok but can't interact with router via serial console

Line 
1CFE version 1.0.37-6.8.5 for BCM96348 (32bit,SP,BE)h version 6 and board type                       
22
3Build Date: Tue Jan  2 19:42:28 CST 2007 (michaelc)63
4RTA1025W_16Pool 1 Init
5[    0.488000] bcm963xx_f
6
7Boot Address 0xbfc00000offset 0 and length 100
8
9Flash Config: CS0(1fc00009,1f),Base(bfc00000),Size(4MB)                   
10[    0.496000] bcm963xx_flash: Par
11Ethernet Switch Mode 000000000 and length eff       
12
13Buil
14found@block 8p io schedule
15
16Board IP address                  : 192.168.29.8 0.504000] bcm963xx_flash: Partition 2 is rootfs
17Host IP address                   : 192.168.29.9                 
18rootfs_addr 0bfc1010000000gis
19Gateway IP address                :bcm963xx_flash: Partition 3 is nvra
20Run from flash/host (f/h)         : fd_init entry000),Size(4MB)t v1.8 Ben
21Default host run file name        :00 
22
23                           
24S
25Default host flash file name      : bcmModelName_fs_kernel963xx_serial driver v2.0e 00000000s filesystem) r         
26Boot delay (0-9 secon                   
27Serial Number                     :ision is: 000291                   
28Memory size in MB                 : 16         
29Ebtables v2.0 registereder
30CMT Thread Number                 : 0     
31Boot delay (           
32NET: R
33
34==== Press space key to stop auto run (1 seconds) ====     
35[
36
37atmapi: module lice                   
38Boar
39Auto run second count down(before hit space key): 0                                     
40 12:01am  up
41Code Address: 0x80010000, Entry Address: 0x80010000en Greear <greearb@candelatech.com>dsl: adsl_init e
42Decompression OK!                 
43Entry at 0x80010000                   
44Closing network.mber of MAC Addr
45PCI: Settin
46[    0.000000]  memory: 01000000 @ 00000000 (usable)=0x0000098                                         
47[    0.000000] Initrd not found or empty - disabling initrd6kB, phy                                   
48PCI: Enabling d
49[    0.000000] Zone PFN ranges:)amPHY=0xA0FFFFF8, 0x0 0x0Annex
50[    0.000000]   Normal   0x00000000 -> 0x00001000                                                 
51[    0.000000] Movable zone start PFN for each node mapped sromnesize 16                             
52[    0.000000] early_node_map[1] active PFN rangesterDyingGaspHandler: dsl0 registeredtes per conntr
53[    0.000000]     0: 0x00000000 -> 0x00001000                     
54Can't analyze prologue 
55
56Setting SSID "RTA1025W-58
57ges: 4064         
58[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jff country code using abbreviation: "AU"                                         
59s2 noinitrd console=ttyS0,115200ls                             
60[    0.000000] PID hash table entries: 64 (order: -4, 256 bytes)ace "nas_8_35" created sucessfully                             
61[    0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes): LLC                                                           
62
63ip_tables
64[    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)   
65ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntr
66Boot finished and auto provision on lan not triggered: Exit
67d, 453k data, 176k init, 0k highmem)                                   
68[    0.000000] NR_IRQS:128
69n process         
70
71CFE>
72[    0.000000] Calibrating delay loop... 239.10 BogoMIPS (lpj=478208)e all flash (except bootrom)? (y/n):y                               
73[    0.032000] pid_max: default: 32768 minimum: 301
74No image tag found.  Erase the blocks start at [8]
75[    0.036000] Mount-cache hash table entries: 512..................................................
76[    0.060000] NET: Registered protoc                                   
77[    0.160000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]                                         
78Boot delay (0-9 seconds)       
79[    0.164000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]               : RTA1025W_16                                 
80[    0.168000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]               
81Number of MAC Addresses (1-32)    : 4                     
82[    0.172000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]                                               
83Serial Number           
84[    0.176000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]   : 16                                     
85CMT Thread Number             
86[    0.180000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)ion 1.0.37-6.8.5 for BCM96348 (32bit,SP,BE)                   
87[    0.188000] Switching to clocksource MIPSue Jan  2 19:42:28 CST 2007 (michaelc)     
88[    0.208000] PCI: Enabling device 0000:0 
89
90Boot Address 0xbfc0                 
91w
92CPU revi       
93Ebtables v2.0 registeredn
94[    0.332000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)                                               
95NET: Registered protoco
96[    0.340000] TCP: Hash tables configured (established 512 bind 512)                         
97   18 admin           SW                 
98[    0.348000] TCP reno registered      : fET: Registered protocol f
99[    0.348000] UDP hash table entries: 256 (order: 0, 40                         
100                           
101[    0.396000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITYss:  <enter> to use current value00) multi-call binarye_map[1]                 
102) (c) 2001-2006 Red Hat, Inc.                 
103Board IP ad
104[    0.408000] msgmni has been set to 2592.168.29.8                             
105[    0.412000] io scheduler noop registeredin      1376 S   telnetd68 S   dhcpdh     
106 ID 0x000001 Chip ID 0x001a00         
107Default host run f
108[    0.452000] Amd/Fujitsu Extended Query Table at 0x0040                                                         
109[    0.456000]   Amd/Fujitsu Extended Query version 1.3.                       
110kill dproxy           
111Boot imag
112[    0.464000] number of CFI chips: 12 BCM96348 (32bit,SP,BE)esta         
113[    0.468000] bcm963xx_flash: Read Signature value of CFE1CFE1 
114*** command status = 0                     
115CFE>   
116CFE> 
117[    0.472000] bcm963xx-flash bcm963xx-flash.0: CFE bootl
118CFE>069a       
119                                     
120[    0.516000] bcm963xx_flash: Partition 4 is linux offset 10000 and length 3e00
12100
122[    0.524000] bcm963xx_flash: Spare partition is 270000 offset and length 18000
1230
124[    0.532000] Creating 5 MTD partitions on "bcm963xx":
125[    0.540000] 0x000000000000-0x000000010000 : "CFE"
126[    0.552000] 0x000000010100-0x000000100000 : "kernel"
127[    0.556000] mtd: partition "kernel" must either start or end on erase block b
128oundary or be smaller than an erase block -- forcing read-only
129[    0.576000] 0x000000100000-0x0000003f0000 : "rootfs"
130[    0.588000] mtd: partition "rootfs" set to be root filesystem
131[    0.596000] mtd: partition "rootfs_data" created automatically, ofs=260000, l
132en=190000
133[    0.604000] 0x000000260000-0x0000003f0000 : "rootfs_data"
134[    0.616000] 0x0000003f0000-0x000000400000 : "nvram"
135[    0.632000] 0x000000010000-0x0000003f0000 : "linux"
136[    0.656000] bcm63xx_enet MII bus: probed
137[    0.672000] bcm63xx-wdt bcm63xx-wdt.0:  started, timer margin: 30 sec
138[    0.680000] TCP westwood registered
139[    0.684000] NET: Registered protocol family 17
140[    0.692000] Bridge firewalling registered
141[    0.696000] 802.1Q VLAN Support v1.8
142[    0.700000] turn off boot console early0