Ticket #5312: boot.txt

File boot.txt, 4.9 KB (added by tschenser@…, 7 years ago)

Bootlog of normal Boot

1root@OpenWrt:/# reboot
2root@OpenWrt:/# br-lan: port 1(eth0.0) entering disabled state
3device eth0 left promiscuous mode
4device eth0.0 left promiscuous mode
5br-lan: port 1(eth0.0) entering disabled state
6bcm47xx_wdt: Unexpected close, not stopping watchdog!
7Restarting system.
8Please stand by while rebooting t
10CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
11Build Date: Tue Aug  7 17:14:08 CST 2007 (crazy@sw1.rd)
12Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
14Initializing Arena
15Initializing Devices.
17No DPN
18et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
19CPU type 0x29008: 200MHz
20Total memory: 16384 KBytes
22Total memory used by CFE:  0x80300000 - 0x803A39B0 (670128)
23Initialized Data:          0x803398C0 - 0x8033BFD0 (10000)
24BSS Area:                  0x8033BFD0 - 0x8033D9B0 (6624)
25Local Heap:                0x8033D9B0 - 0x803A19B0 (409600)
26Stack Area:                0x803A19B0 - 0x803A39B0 (8192)
27Text (code) segment:       0x80300000 - 0x803398C0 (235712)
28Boot area (physical):      0x003A4000 - 0x003E4000
29Relocation Factor:         I:00000000 - D:00000000
31Boot version: v3.7
32The boot is CFE
34mac_init(): Find mac [00:1D:7E:3A:29:58] in location 0
37eou_key_init(): Find key pair in location 0
38The eou device id is same
39The eou public key is same
40The eou private key is same
41Device eth0:  hwaddr 00-1D-7E-3A-29-58, ipaddr, mask
42        gateway not set, nameserver not set
43Reading :: Failed.: Timeout occured
44Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
45Loading: .. 3768 bytes read
46Entry at 0x80001000
47Closing network.
48Starting program at 0x80001000
49Linux version (jens@miraculix) (gcc version 4.1.2) #4 Mon Sep 14 19:06:28 CEST 2009
50CPU revision is: 00029008 (Broadcom BCM3302)
51ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243000 : "linux"
520x0010dc00-0x003f0000 : "rootfs"
53mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
54mtd: partition "rootfs" set to be root filesystem
55mtd: partition "rootfs_data" created automatically, ofs=320000, len=D0000
560x00320000-0x003f0000 : "rootfs_data"
570x003f0000-0x00400000 : "nvram"
58BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
59TCP westwood registered
60NET: Registered protocol family 17
61802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
62All bugs added by David S. Miller <davem@redhat.com>
63VFS: Mounted root (squashfs filesystem) readonly.
64Freeing unused kernel memory: 136k freed
65Please be patient, while OpenWrt loads ...
66- preinit -
67Press CTRL-C for failsafe
68diag: Detected 'Linksys WRT54G/GS/GL'
69b44: eth0: Link is up at 100 Mbps, full duplex.
70b44: eth0: Flow control is off for TX and off for RX.
71roboswitch: Probing device eth0: found!
72b44: eth0: powering down PHY
73switching to jffs2
74mini_fo: using base directory: /
75mini_fo: using storage directory: /jffs
76- init -
78Please press Enter to activate this console. NET: Registered protocol family 10
79lo: Disabled Privacy Extensions
80b44: eth0: Link is up at 100 Mbps, full duplex.
81b44: eth0: Flow control is off for TX and off for RX.
82device eth0.0 entered promiscuous mode
83device eth0 entered promiscuous mode
84br-lan: topology change detected, propagating
85br-lan: port 1(eth0.0) entering forwarding state
86cfg80211: Using static regulatory domain info
87cfg80211: Regulatory domain: US
88        (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
89        (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
90        (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
91        (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
92        (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
93        (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
94        (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
95cfg80211: Calling CRDA for country: US
96b43-phy0: Broadcom 5352 WLAN found (core revision 9)
97Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
98Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
99PPP generic driver version 2.4.2
100tun: Universal TUN/TAP device driver, 1.6
101tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
102IPv6 over IPv4 tunneling driver
103sit0: Disabled Privacy Extensions
104ip_tables: (C) 2000-2006 Netfilter Core Team
105nf_conntrack version 0.5.0 (256 buckets, 1024 max)
106ip6_tables: (C) 2000-2006 Netfilter Core Team
107b43 ssb0:3: firmware: requesting b43/ucode5.fw
108b43 ssb0:3: firmware: requesting b43/pcm5.fw
109b43 ssb0:3: firmware: requesting b43/b0g0initvals5.fw
110b43 ssb0:3: firmware: requesting b43/b0g0bsinitvals5.fw
111b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
112Registered led device: b43-phy0::tx
113Registered led device: b43-phy0::rx
114Registered led device: b43-phy0::radio
115ADDRCONF(NETDEV_UP): wlan0: link is not ready
116ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready