Ticket #7971: out.TXT

File out.TXT, 8.5 KB (added by anonymous, 6 years ago)

serial output of "broken" wrt54

3CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
4Build Date: Mon Nov 14 18:06:25 CST 2005 (root@localhost.localdomain)
5Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
7Initializing Arena
8Initializing Devices.
10No DPN
11et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
12CPU type 0x29008: 200MHz
13Total memory: 16384 KBytes
15Total memory used by CFE:  0x80300000 - 0x803A39C0 (670144)
16Initialized Data:          0x803398D0 - 0x8033BFE0 (10000)
17BSS Area:                  0x8033BFE0 - 0x8033D9C0 (6624)
18Local Heap:                0x8033D9C0 - 0x803A19C0 (409600)
19Stack Area:                0x803A19C0 - 0x803A39C0 (8192)
20Text (code) segment:       0x80300000 - 0x803398D0 (235728)
21Boot area (physical):      0x003A4000 - 0x003E4000
22Relocation Factor:         I:00000000 - D:00000000
24Boot version: v3.7
25The boot is CFE
27mac_init(): Find mac [00:18:39:6B:DE:FE] in location 0
30eou_key_init(): Find key pair in location 0
31The eou device id is same
32The eou public key is same
33The eou private key is same
34Device eth0:  hwaddr 00-18-39-6B-DE-FE, ipaddr, mask
35        gateway not set, nameserver not set
36Reading :: Failed.: Timeout occured
37Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
38Loading: .. 4092 bytes read
39Entry at 0x80001000
40Closing network.
41Starting program at 0x80001000
42Linux version (openwrt@wrt1.marcant.net) (gcc version 4.3.3 (GCC) ) #20 Tue Apr 6 15:53:48 CEST 2010
43CPU revision is: 00029008 (Broadcom BCM3302)
44ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243)
45ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243)
46ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243)
47ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243)
48ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
49ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
50ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243)
51ssb: Initializing MIPS core...
52ssb: set_irq: core 0x0806, irq 4 => 4
53ssb: set_irq: core 0x0816, irq 5 => 2
54ssb: set_irq: core 0x0812, irq 2 => 5
55ssb: after irq reconfiguration
56ssb: core 0x0800, irq : 2(S)  3* 4  5  6  D  I
57ssb: core 0x0806, irq : 2(S)  3  4* 5  6  D  I
58ssb: core 0x0816, irq : 2(S)* 3  4  5  6  D  I
59ssb: core 0x0817, irq : 2(S)  3  4  5  6* D  I
60ssb: core 0x080f, irq : 2(S)  3  4  5  6  D  I*
61ssb: core 0x0812, irq : 2(S)  3  4  5* 6  D  I
62ssb: core 0x081c, irq : 2(S)  3  4  5  6  D  I*
63ssb: Sonics Silicon Backplane found at address 0x18000000
64Serial init done.
65Determined physical RAM map:
66 memory: 01000000 @ 00000000 (usable)
67Initrd not found or empty - disabling initrd
68Zone PFN ranges:
69  Normal   0x00000000 -> 0x00001000
70Movable zone start PFN for each node
71early_node_map[1] active PFN ranges
72    0: 0x00000000 -> 0x00001000
73Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
74Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
75PID hash table entries: 64 (order: -4, 256 bytes)
76Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
77Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
78Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
79Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
80Memory: 13280k/16384k available (2322k kernel code, 3104k reserved, 357k data, 136k init, 0k highmem)
81Hierarchical RCU implementation.
83console [ttyS0] enabled
84Calibrating delay loop... 199.16 BogoMIPS (lpj=398336)
85Mount-cache hash table entries: 512
86NET: Registered protocol family 16
87bio: create slab <bio-0> at 0
88Switching to clocksource MIPS
89NET: Registered protocol family 2
90IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
91TCP established hash table entries: 512 (order: 0, 4096 bytes)
92TCP bind hash table entries: 512 (order: -1, 2048 bytes)
93TCP: Hash tables configured (established 512 bind 512)
94TCP reno registered
95NET: Registered protocol family 1
96squashfs: version 4.0 (2009/01/31) Phillip Lougher
97Registering mini_fo version $Id$
98JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
99msgmni has been set to 25
100io scheduler noop registered
101io scheduler deadline registered (default)
102Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
103serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
104serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
105serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
106serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
107flash init: 0x1c000000 0x02000000
108Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
109 Intel/Sharp Extended Query Table at 0x0035
110Using auto-unlock on power-up/resume
111cfi_cmdset_0001: Erase suspend on write enabled
112Flash device: 0x400000 at 0x1fc00000
113bootloader size: 262144
114Creating 4 MTD partitions on "Physically mapped flash":
1150x000000000000-0x000000040000 : "cfe"
1160x000000040000-0x0000003f0000 : "linux"
1170x00000011a400-0x0000003f0000 : "rootfs"
118mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
119mtd: partition "rootfs" set to be root filesystem
120mtd: partition "rootfs_data" created automatically, ofs=2F0000, len=100000
1210x0000002f0000-0x0000003f0000 : "rootfs_data"
1220x0000003f0000-0x000000400000 : "nvram"
124eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:18:39:6b:de:fe
125BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
126TCP westwood registered
127NET: Registered protocol family 17
128802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
129All bugs added by David S. Miller <davem@redhat.com>
130VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
131Freeing unused kernel memory: 136k freed
132Please be patient, while OpenWrt loads ...
133diag: Detected 'Linksys WRT54G/GS/GL'
134b44: eth0: Link is up at 100 Mbps, full duplex.
135b44: eth0: Flow control is off for TX and off for RX.
136roboswitch: Probing device eth0: found a 5325! It's a 5350.
137- preinit -
138b44: eth0: powering down PHY
139b44: eth0: Link is up at 100 Mbps, full duplex.
140b44: eth0: Flow control is off for TX and off for RX.
141b44: eth0: powering down PHY
142Press the [f] key and hit [enter] to enter failsafe mode
143- regular preinit -
144b44: eth0: Link is up at 100 Mbps, full duplex.
145b44: eth0: Flow control is off for TX and off for RX.
146b44: eth0: powering down PHY
147switching to jffs2
148mini_fo: using base directory: /
149mini_fo: using storage directory: /overlay
150b44: eth0: Link is up at 100 Mbps, full duplex.
151b44: eth0: Flow control is off for TX and off for RX.
152b44: eth0: powering down PHY
153- init -
154b44: eth0: Link is up at 100 Mbps, full duplex.
155b44: eth0: Flow control is off for TX and off for RX.
156b44: eth0: powering down PHY
158Please press Enter to activate this console. b44: eth0: Link is up at 100 Mbps, full duplex.
159b44: eth0: Flow control is off for TX and off for RX.
160device eth0.0 entered promiscuous mode
161device eth0 entered promiscuous mode
162br-lan: port 1(eth0.0) entering forwarding state
163Generic kernel compatibility enabled based on linux-next next-20100113
164cfg80211: Calling CRDA to update world regulatory domain
165device eth0.1 entered promiscuous mode
166br-wan: port 1(eth0.1) entering forwarding state
167b43-phy0: Broadcom 5352 WLAN found (core revision 9)
168Registered led device: b43-phy0::tx
169Registered led device: b43-phy0::rx
170Registered led device: b43-phy0::radio
171Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
172Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
173PPP generic driver version 2.4.2
174cfg80211: World regulatory domain updated:
175    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
176    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
177    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
178    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
179    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
180    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
181ip_tables: (C) 2000-2006 Netfilter Core Team
182NET: Registered protocol family 24
183nf_conntrack version 0.5.0 (209 buckets, 836 max)
184CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
185nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
186sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
187b43 ssb0:3: firmware: requesting b43/ucode5.fw
188b43 ssb0:3: firmware: requesting b43-open/ucode5.fw
189b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
190b43-phy0 ERROR: Firmware file "b43-open/ucode5