source: branches/backfire/package/ltq-vmmc/Config.in @ 27547

Last change on this file since 27547 was 27547, checked in by blogic, 5 years ago

adds lantiq packages/drivers

File size: 2.8 KB
Line 
1choice
2        prompt "device selection"
3        depends on PACKAGE_kmod-ltq-vmmc
4        default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
5        help
6                Select the target device.
7
8        config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
9                bool "Danube, Twinpass, Vinax"
10                depends on TARGET_lantiq_danube
11
12        config VOICE_CPE_VMMC_WITH_DEVICE_AR9
13                bool "AR9 family"
14                depends on TARGET_lantiq_ar9
15
16        config VOICE_CPE_VMMC_WITH_DEVICE_VR9
17                bool "VR9 family"
18                depends on TARGET_lantiq_vr9
19       
20        config VOICE_VMMC_WITH_DEVICE_FALCON
21                bool "FALC-ON"
22                depends on TARGET_lantiq_falcon
23
24endchoice
25
26choice
27        depends on PACKAGE_kmod-ltq-vmmc
28        prompt "FXS coefficients"
29        default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
30        help
31                Select country specific FXS coefficient file.
32
33        config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
34                bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz"
35                help
36                  These coefficents contains a parameter set with line impedance Zr according to ETSI.
37
38                  T:   gain in transmit direction (attenuation 3dBr) [dBr]
39                  R:   gain in receive direction (attenuation 10dBr) [dBr]
40                  Vl:  on-hook voltage limit [V]
41                  Ic:  off-hook loop current [mA]
42                  Vid: low-power-standby voltage [V]
43                  Vri: ring voltage [v]
44                  f:   ring frequency [V]
45
46        config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
47                bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
48                help
49                  These coefficents contains a parameter set with line impedance e.g. for USA.
50 
51                  T:   gain in transmit direction (attenuation 3dBr) [dBr]
52                  R:   gain in receive direction (attenuation 10dBr) [dBr]
53                  Vl:  on-hook voltage limit [V]
54                  Ic:  off-hook loop current [mA]
55                  Vid: low-power-standby voltage [V]
56                  Vri: ring voltage [v]
57                  f:   ring frequency [V]
58
59        config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
60                bool "Select own FXS coefficient file"
61endchoice
62
63config VOICE_CPE_VMMC_PMC
64        depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
65        bool "Power Management Control support"
66        default n
67        help
68                Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
69
70config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
71        bool "Disable DECT nibble swap"
72        depends on PACKAGE_kmod-ltq-vmmc
73        default n
74        help
75                Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
76
77config VOICE_CPE_VMMC_EVENT_LOGGER
78        depends on BROKEN
79        bool "Event logger support"
80        depends on PACKAGE_kmod-ltq-vmmc
81        default n
82        help
83                Option to enable details traces between drv_vmmc and the voice FW
84                - for debugging only
85                - requires package ifx-evtlog
86
87config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
88        int "MPS history buffer in words (0<=size<=512)"
89        depends on PACKAGE_kmod-ltq-vmmc
90        default "128"
91        help
92                MPS history buffer (default=128 words, maximum=512 words, 0=disable)
93                To opimize the memory footprint in RAM, you might want to set the
94                buffer size to 0.
95
Note: See TracBrowser for help on using the repository browser.