source: branches/backfire/target/linux/avr32/config-2.6.32 @ 29321

Last change on this file since 29321 was 29321, checked in by nico, 5 years ago

[backfire] target: standardize config file & patches dir names (2.6)

  • rename "config-default" file to "config-X.Y.Z"
  • rename "patches" dir to "patches-X.Y.Z"
File size: 3.1 KB
Line 
1CONFIG_AP700X_16_BIT_SMC=y
2# CONFIG_AP700X_32_BIT_SMC is not set
3# CONFIG_AP700X_8_BIT_SMC is not set
4# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
5# CONFIG_ARCH_HAS_ILOG2_U32 is not set
6# CONFIG_ARCH_HAS_ILOG2_U64 is not set
7# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
8CONFIG_ARCH_REQUIRE_GPIOLIB=y
9# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
10# CONFIG_ARCH_SUPPORTS_MSI is not set
11CONFIG_ARCH_SUSPEND_POSSIBLE=y
12CONFIG_AT32AP700X_WDT=m
13# CONFIG_ATMEL_PWM is not set
14# CONFIG_ATMEL_SSC is not set
15CONFIG_ATMEL_TCB_CLKSRC=y
16CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
17CONFIG_ATMEL_TCLIB=y
18CONFIG_AVR32=y
19CONFIG_BITREVERSE=y
20CONFIG_BOARD_ATNGW100=y
21CONFIG_BOARD_ATNGW100_ADDON_NONE=y
22# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
23# CONFIG_BOARD_ATNGW100_MRMT is not set
24# CONFIG_BOARD_ATSTK1000 is not set
25# CONFIG_BOARD_FAVR_32 is not set
26# CONFIG_BOARD_HAMMERHEAD is not set
27# CONFIG_BOARD_MERISC is not set
28# CONFIG_BOARD_MIMC200 is not set
29CONFIG_CFG80211_DEFAULT_PS_VALUE=0
30CONFIG_CPU_AT32AP7000=y
31CONFIG_CPU_AT32AP700X=y
32CONFIG_DMADEVICES=y
33CONFIG_DMA_ENGINE=y
34CONFIG_DW_DMAC=y
35CONFIG_ENTRY_ADDRESS=0x90000000
36# CONFIG_FSNOTIFY is not set
37CONFIG_GENERIC_ALLOCATOR=y
38CONFIG_GENERIC_BUG=y
39CONFIG_GENERIC_CLOCKEVENTS=y
40CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
41CONFIG_GENERIC_FIND_LAST_BIT=y
42CONFIG_GENERIC_GPIO=y
43CONFIG_GPIOLIB=y
44CONFIG_HARDIRQS_SW_RESEND=y
45CONFIG_HAS_DMA=y
46CONFIG_HAS_IOMEM=y
47CONFIG_HAS_IOPORT=y
48# CONFIG_HAVE_ARCH_BOOTMEM is not set
49CONFIG_HAVE_CLK=y
50# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
51CONFIG_HAVE_KPROBES=y
52CONFIG_HAVE_OPROFILE=y
53# CONFIG_HW_RANDOM is not set
54CONFIG_I2C=m
55CONFIG_I2C_BOARDINFO=y
56# CONFIG_I2C_DESIGNWARE is not set
57CONFIG_INITRAMFS_SOURCE=""
58CONFIG_LEDS_GPIO=y
59CONFIG_LOADER_U_BOOT=y
60CONFIG_LOAD_ADDRESS=0x10000000
61CONFIG_MACB=y
62CONFIG_MMC=m
63# CONFIG_MMC_AT91 is not set
64CONFIG_MMC_ATMELMCI=m
65# CONFIG_MMC_ATMELMCI_DMA is not set
66CONFIG_MMC_BLOCK=m
67# CONFIG_MTD_CFI_INTELEXT is not set
68CONFIG_MTD_CMDLINE_PARTS=y
69# CONFIG_MTD_COMPLEX_MAPPINGS is not set
70CONFIG_MTD_DATAFLASH=y
71# CONFIG_MTD_DATAFLASH_OTP is not set
72# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
73CONFIG_MTD_PHYSMAP=y
74# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
75# CONFIG_NET_DMA is not set
76# CONFIG_NMI_DEBUGGING is not set
77CONFIG_NO_HZ=y
78CONFIG_NR_QUICK=2
79# CONFIG_OWNERSHIP_TRACE is not set
80CONFIG_PAGEFLAGS_EXTENDED=y
81# CONFIG_PATA_AT32 is not set
82CONFIG_PERFORMANCE_COUNTERS=y
83CONFIG_PHYLIB=y
84CONFIG_PHYS_OFFSET=0x10000000
85CONFIG_PLATFORM_AT32AP=y
86CONFIG_QUICKLIST=y
87CONFIG_RTC_CLASS=y
88CONFIG_RTC_DRV_AT32AP700X=y
89# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
90CONFIG_SCHED_HRTICK=y
91# CONFIG_SCSI_DMA is not set
92# CONFIG_SDIO_UART is not set
93# CONFIG_SERIAL_8250 is not set
94CONFIG_SERIAL_ATMEL=y
95CONFIG_SERIAL_ATMEL_CONSOLE=y
96CONFIG_SERIAL_ATMEL_PDC=y
97# CONFIG_SERIAL_ATMEL_TTYAT is not set
98# CONFIG_SND_ATMEL_ABDAC is not set
99# CONFIG_SND_ATMEL_AC97C is not set
100# CONFIG_SND_ATMEL_SOC is not set
101CONFIG_SPI=y
102CONFIG_SPI_ATMEL=y
103# CONFIG_SPI_BITBANG is not set
104# CONFIG_SPI_GPIO is not set
105CONFIG_SPI_MASTER=y
106# CONFIG_SPI_SPIDEV is not set
107CONFIG_SUBARCH_AVR32B=y
108# CONFIG_TREE_PREEMPT_RCU is not set
109CONFIG_TREE_RCU=y
110CONFIG_ZONE_DMA_FLAG=0
Note: See TracBrowser for help on using the repository browser.