source: trunk/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig @ 2993

Last change on this file since 2993 was 2993, checked in by nbd, 10 years ago

port wan_device changes from whiterussian to kamikaze

  • Property svn:executable set to *
File size: 2.3 KB
Line 
1#!/bin/sh
2[ -e /etc/config/network ] && exit 0
3
4mkdir -p /etc/config
5
6(
7        if [ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ]; then
8                # WGT634u
9                echo boardtype=wgt634u
10        else
11                strings /dev/mtdblock/3
12        fi
13) | awk '
14function p(name) {
15        if (c[name] != "") print name "=\"" c[name] "\""
16}
17
18BEGIN {
19        FS="="
20        c["lan_ifname"]="br0"
21        c["lan_ifnames"]="vlan0 eth1"
22        c["wan_proto"]="none"
23        c["wan_ifname"]="vlan1"
24        c["vlan0ports"]="1 2 3 4 5*"
25        c["vlan1ports"]="0 5"
26}
27
28($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
29        nvram[$1] = $2
30}
31
32END {
33        # v1 hardware
34        if (nvram["boardtype"] == "bcm4710dev") {
35                # Linksys WRT54G v1.x
36                if (nvram["boardnum"] == "42") {
37                        c["vlan0ports"]=""
38                        c["vlan1ports"]=""
39                        c["lan_ifnames"]="vlan2 eth2"
40                }
41
42                # Asus WL-500g
43                if (nvram["boardnum"] == "asusX") {
44                        c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
45                        # wan_ifname=eth1
46                }
47        }
48        if (nvram["boardtype"] == "wgt634u") {
49                c["vlan0ports"] = "0 1 2 3 5*"
50                c["vlan1ports"] = "4 5"
51        }
52        if (nvram["boardtype"] == "0x0467") {
53                c["vlan0ports"] = "0 1 2 3 5*"
54                c["vlan1ports"] = "4 5"
55        }
56
57        # WAP54G
58        if ((nvram["boardnum"] == "2") || \
59                (nvram["boardnum"] == "1024")) {
60                c["lan_ifnames"]="eth0 eth1"
61                c["wan_ifname"]=""
62        }
63
64        print "#### VLAN configuration "
65        print "vlan0hwname=et0"
66        print "vlan1hwname=et0"
67        p("vlan0ports")
68        p("vlan1ports")
69        print ""
70        print ""
71       
72        print "#### LAN configuration"
73        print "lan_proto=\"static\""
74        p("lan_ifname")
75        p("lan_ifnames")
76        print "lan_ipaddr=\"192.168.1.1\""
77        print "# lan_dns=\"192.168.1.1\""
78        print "# lan_gateway=\"192.168.1.1\""
79
80        print ""
81        print ""
82
83        print "#### WAN configuration"
84        print "# wan_proto: WAN protocol, available protocols:"
85        print "#   none: disable"
86        print "#   dhcp: DHCP"
87        print "#   static: Static IP"
88        print "#   pppoe: PPP over Ethernet"
89        print "#   pptp: Point-to-Point tunneling Protocol"
90        print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
91        print ""
92        print "wan_proto=dhcp"
93        p("wan_ifname")
94        print "wan_device=\"" c["wan_ifname"] "\""
95        print "# wan_ipaddr=\"192.168.0.2\""
96        print "# wan_netmask=\"255.255.255.0\""
97        print "# wan_gateway=\"192.168.0.1\""
98        print "# wan_dns=\"192.168.0.1\""
99        print ""
100        print "## PPP over Ethernet and PPTP"
101        print "# wan_ifname=\"ppp0\""
102        print "# pptp_server_ip=\"192.168.0.1\""
103}
104' > /etc/config/network
Note: See TracBrowser for help on using the repository browser.