source: trunk/package/busybox/config/networking/Config.in @ 20661

Last change on this file since 20661 was 20661, checked in by nico, 7 years ago

[package] busybox: update to v1.16.1 (based on v1.16.0 update patch from Peter Wagner)

  • Property svn:eol-style set to native
File size: 29.1 KB
Line 
1#
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
4#
5
6menu "Networking Utilities"
7
8config BUSYBOX_CONFIG_FEATURE_IPV6
9        bool "Enable IPv6 support"
10        default y
11        help
12          Enable IPv6 support in busybox.
13          This adds IPv6 support in the networking applets.
14
15config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
16        bool "Enable Unix domain socket support (usually not needed)"
17        default n
18        help
19          Enable Unix domain socket support in all busybox networking
20          applets.  Address of the form local:/path/to/unix/socket
21          will be recognized.
22
23          This extension is almost never used in real world usage.
24          You most likely want to say N.
25
26config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
27        bool "Prefer IPv4 addresses from DNS queries"
28        default y
29        depends on BUSYBOX_CONFIG_FEATURE_IPV6
30        help
31          Use IPv4 address of network host if it has one.
32
33          If this option is off, the first returned address will be used.
34          This may cause problems when your DNS server is IPv6-capable and
35          is returning IPv6 host addresses too. If IPv6 address
36          precedes IPv4 one in DNS reply, busybox network applets
37          (e.g. wget) will use IPv6 address. On an IPv6-incapable host
38          or network applets will fail to connect to the host
39          using IPv6 address.
40
41config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
42        bool "Verbose resolution errors"
43        default y
44        help
45          Enable if you are not satisfied with simplistic
46          "can't resolve 'hostname.com'" and want to know more.
47          This may increase size of your executable a bit.
48
49config BUSYBOX_CONFIG_ARP
50        bool "arp"
51        default n
52        help
53          Manipulate the system ARP cache.
54
55config BUSYBOX_CONFIG_ARPING
56        bool "arping"
57        default y
58        help
59          Ping hosts by ARP packets.
60
61config BUSYBOX_CONFIG_BRCTL
62        bool "brctl"
63        default y
64        help
65          Manage ethernet bridges.
66          Supports addbr/delbr and addif/delif.
67
68config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
69        bool "Fancy options"
70        default y
71        depends on BUSYBOX_CONFIG_BRCTL
72        help
73          Add support for extended option like:
74            setageing, setfd, sethello, setmaxage,
75            setpathcost, setportprio, setbridgeprio,
76            stp
77          This adds about 600 bytes.
78
79config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
80        bool "Support show"
81        default y
82        depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
83        help
84          Add support for option which prints the current config:
85            show
86
87config BUSYBOX_CONFIG_DNSD
88        bool "dnsd"
89        default n
90        help
91          Small and static DNS server daemon.
92
93config BUSYBOX_CONFIG_ETHER_WAKE
94        bool "ether-wake"
95        default n
96        help
97          Send a magic packet to wake up sleeping machines.
98
99config BUSYBOX_CONFIG_FAKEIDENTD
100        bool "fakeidentd"
101        default n
102        select BUSYBOX_CONFIG_FEATURE_SYSLOG
103        help
104          fakeidentd listens on the ident port and returns a predefined
105          fake value on any query.
106
107config BUSYBOX_CONFIG_FTPD
108        bool "ftpd"
109        default n
110        help
111          simple FTP daemon. You have to run it via inetd.
112
113config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
114        bool "Enable upload commands"
115        default n
116        depends on BUSYBOX_CONFIG_FTPD
117        help
118          Enable all kinds of FTP upload commands (-w option)
119
120config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
121        bool "Enable workaround for RFC-violating clients"
122        default n
123        depends on BUSYBOX_CONFIG_FTPD
124        help
125          Some ftp-clients (among them KDE's Konqueror) issue illegal
126          "LIST -la" requests. This option works around those problems.
127          It might prevent you from listing files starting with "-" and
128          it increases the code size by ~40 bytes.
129          Most other ftp servers seem to behave similar to this.
130
131config BUSYBOX_CONFIG_FTPGET
132        bool "ftpget"
133        default n
134        help
135          Retrieve a remote file via FTP.
136
137config BUSYBOX_CONFIG_FTPPUT
138        bool "ftpput"
139        default n
140        help
141          Store a remote file via FTP.
142
143config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
144        bool "Enable long options in ftpget/ftpput"
145        default n
146        depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
147        help
148          Support long options for the ftpget/ftpput applet.
149
150config BUSYBOX_CONFIG_HOSTNAME
151        bool "hostname"
152        default n
153        help
154          Show or set the system's host name.
155
156config BUSYBOX_CONFIG_HTTPD
157        bool "httpd"
158        default n
159        help
160          Serve web pages via an HTTP server.
161
162config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
163        bool "Support 'Ranges:' header"
164        default n
165        depends on BUSYBOX_CONFIG_HTTPD
166        help
167          Makes httpd emit "Accept-Ranges: bytes" header and understand
168          "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
169          downloads, seeking in multimedia players etc.
170
171config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
172        bool "Use sendfile system call"
173        default n
174        depends on BUSYBOX_CONFIG_HTTPD
175        help
176          When enabled, httpd will use the kernel sendfile() function
177          instead of read/write loop.
178
179config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
180        bool "Enable -u <user> option"
181        default n
182        depends on BUSYBOX_CONFIG_HTTPD
183        help
184          This option allows the server to run as a specific user
185          rather than defaulting to the user that starts the server.
186          Use of this option requires special privileges to change to a
187          different user.
188
189config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
190        bool "Enable Basic http Authentication"
191        default n
192        depends on BUSYBOX_CONFIG_HTTPD
193        help
194          Utilizes password settings from /etc/httpd.conf for basic
195          authentication on a per url basis.
196
197config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
198        bool "Support MD5 crypted passwords for http Authentication"
199        default n
200        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
201        help
202          Enables basic per URL authentication from /etc/httpd.conf
203          using md5 passwords.
204
205config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
206        bool "Support Common Gateway Interface (CGI)"
207        default n
208        depends on BUSYBOX_CONFIG_HTTPD
209        help
210          This option allows scripts and executables to be invoked
211          when specific URLs are requested.
212
213config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
214        bool "Support for running scripts through an interpreter"
215        default n
216        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
217        help
218          This option enables support for running scripts through an
219          interpreter. Turn this on if you want PHP scripts to work
220          properly. You need to supply an additional line in your httpd
221          config file:
222          *.php:/path/to/your/php
223
224config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
225        bool "Set REMOTE_PORT environment variable for CGI"
226        default n
227        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
228        help
229          Use of this option can assist scripts in generating
230          references that contain a unique port number.
231
232config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
233        bool "Enable -e option (useful for CGIs written as shell scripts)"
234        default n
235        depends on BUSYBOX_CONFIG_HTTPD
236        help
237          This option allows html encoding of arbitrary strings for display
238          by the browser. Output goes to stdout.
239          For example, httpd -e "<Hello World>" produces
240          "&#60Hello&#32World&#62".
241
242config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
243        bool "Support for custom error pages"
244        default n
245        depends on BUSYBOX_CONFIG_HTTPD
246        help
247          This option allows you to define custom error pages in
248          the configuration file instead of the default HTTP status
249          error pages. For instance, if you add the line:
250                E404:/path/e404.html
251          in the config file, the server will respond the specified
252          '/path/e404.html' file instead of the terse '404 NOT FOUND'
253          message.
254
255config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
256        bool "Support for reverse proxy"
257        default n
258        depends on BUSYBOX_CONFIG_HTTPD
259        help
260          This option allows you to define URLs that will be forwarded
261          to another HTTP server. To setup add the following line to the
262          configuration file
263                P:/url/:http://hostname[:port]/new/path/
264          Then a request to /url/myfile will be forwarded to
265          http://hostname[:port]/new/path/myfile.
266
267config BUSYBOX_CONFIG_IFCONFIG
268        bool "ifconfig"
269        default y
270        help
271          Ifconfig is used to configure the kernel-resident network interfaces.
272
273config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
274        bool "Enable status reporting output (+7k)"
275        default y
276        depends on BUSYBOX_CONFIG_IFCONFIG
277        help
278          If ifconfig is called with no arguments it will display the status
279          of the currently active interfaces.
280
281config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
282        bool "Enable slip-specific options \"keepalive\" and \"outfill\""
283        default n
284        depends on BUSYBOX_CONFIG_IFCONFIG
285        help
286          Allow "keepalive" and "outfill" support for SLIP. If you're not
287          planning on using serial lines, leave this unchecked.
288
289config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
290        bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
291        default n
292        depends on BUSYBOX_CONFIG_IFCONFIG
293        help
294          Allow the start address for shared memory, start address for I/O,
295          and/or the interrupt line used by the specified device.
296
297config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
298        bool "Enable option \"hw\" (ether only)"
299        default y
300        depends on BUSYBOX_CONFIG_IFCONFIG
301        help
302          Set the hardware address of this interface, if the device driver
303          supports  this  operation. Currently, we only support the 'ether'
304          class.
305
306config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
307        bool "Set the broadcast automatically"
308        default y
309        depends on BUSYBOX_CONFIG_IFCONFIG
310        help
311          Setting this will make ifconfig attempt to find the broadcast
312          automatically if the value '+' is used.
313
314config BUSYBOX_CONFIG_IFENSLAVE
315        bool "ifenslave"
316        default n
317        help
318          Userspace application to bind several interfaces
319          to a logical interface (use with kernel bonding driver).
320
321config BUSYBOX_CONFIG_IFPLUGD
322        bool "ifplugd"
323        default n
324        help
325          Network interface plug detection daemon.
326
327config BUSYBOX_CONFIG_IFUPDOWN
328        bool "ifupdown"
329        default n
330        help
331          Activate or deactivate the specified interfaces. This applet makes
332          use of either "ifconfig" and "route" or the "ip" command to actually
333          configure network interfaces. Therefore, you will probably also want
334          to enable either IFCONFIG and ROUTE, or enable
335          FEATURE_IFUPDOWN_IP and the various IP options. Of
336          course you could use non-busybox versions of these programs, so
337          against my better judgement (since this will surely result in plenty
338          of support questions on the mailing list), I do not force you to
339          enable these additional options. It is up to you to supply either
340          "ifconfig", "route" and "run-parts" or the "ip" command, either
341          via busybox or via standalone utilities.
342
343config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
344        string "Absolute path to ifstate file"
345        default n
346        depends on BUSYBOX_CONFIG_IFUPDOWN
347        help
348          ifupdown keeps state information in a file called ifstate.
349          Typically it is located in /var/run/ifstate, however
350          some distributions tend to put it in other places
351          (debian, for example, uses /etc/network/run/ifstate).
352          This config option defines location of ifstate.
353
354config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
355        bool "Use ip applet"
356        default n
357        depends on BUSYBOX_CONFIG_IFUPDOWN
358        help
359          Use the iproute "ip" command to implement "ifup" and "ifdown", rather
360          than the default of using the older 'ifconfig' and 'route' utilities.
361
362config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
363        bool "Use busybox ip applet"
364        default n
365        depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
366        select BUSYBOX_CONFIG_IP
367        select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
368        select BUSYBOX_CONFIG_FEATURE_IP_LINK
369        select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
370        help
371          Use the busybox iproute "ip" applet to implement "ifupdown".
372
373          If left disabled, you must install the full-blown iproute2
374          utility or the  "ifup" and "ifdown" applets will not work.
375
376config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
377        bool "Use busybox ifconfig and route applets"
378        default n
379        depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
380        select BUSYBOX_CONFIG_IFCONFIG
381        select BUSYBOX_CONFIG_ROUTE
382        help
383          Use the busybox iproute "ifconfig" and "route" applets to
384          implement the "ifup" and "ifdown" utilities.
385
386          If left disabled, you must install the full-blown ifconfig
387          and route utilities, or the  "ifup" and "ifdown" applets will not
388          work.
389
390config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
391        bool "Support for IPv4"
392        default n
393        depends on BUSYBOX_CONFIG_IFUPDOWN
394        help
395          If you want ifup/ifdown to talk IPv4, leave this on.
396
397config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
398        bool "Support for IPv6"
399        default n
400        depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
401        help
402          If you need support for IPv6, turn this option on.
403
404### UNUSED
405###config FEATURE_IFUPDOWN_IPX
406###     bool "Support for IPX"
407###     default n
408###     depends on IFUPDOWN
409###     help
410###       If this option is selected you can use busybox to work with IPX
411###       networks.
412
413config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
414        bool "Enable mapping support"
415        default n
416        depends on BUSYBOX_CONFIG_IFUPDOWN
417        help
418          This enables support for the "mapping" stanza, unless you have
419          a weird network setup you don't need it.
420
421config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
422        bool "Support for external dhcp clients"
423        default n
424        depends on BUSYBOX_CONFIG_IFUPDOWN
425        help
426          This enables support for the external dhcp clients. Clients are
427          tried in the following order: dhcpcd, dhclient, pump and udhcpc.
428          Otherwise, if udhcpc applet is enabled, it is used.
429          Otherwise, ifup/ifdown will have no support for DHCP.
430
431config BUSYBOX_CONFIG_INETD
432        bool "inetd"
433        default n
434        select BUSYBOX_CONFIG_FEATURE_SYSLOG
435        help
436          Internet superserver daemon
437
438config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
439        bool "Support echo service"
440        default n
441        depends on BUSYBOX_CONFIG_INETD
442        help
443          Echo received data internal inetd service
444
445config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
446        bool "Support discard service"
447        default n
448        depends on BUSYBOX_CONFIG_INETD
449        help
450          Internet /dev/null internal inetd service
451
452config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
453        bool "Support time service"
454        default n
455        depends on BUSYBOX_CONFIG_INETD
456        help
457          Return 32 bit time since 1900 internal inetd service
458
459config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
460        bool "Support daytime service"
461        default n
462        depends on BUSYBOX_CONFIG_INETD
463        help
464          Return human-readable time internal inetd service
465
466config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
467        bool "Support chargen service"
468        default n
469        depends on BUSYBOX_CONFIG_INETD
470        help
471          Familiar character generator internal inetd service
472
473config BUSYBOX_CONFIG_FEATURE_INETD_RPC
474        bool "Support RPC services"
475        default n
476        depends on BUSYBOX_CONFIG_INETD
477        select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
478        help
479          Support Sun-RPC based services
480
481config BUSYBOX_CONFIG_IP
482        bool "ip"
483        default n
484        help
485          The "ip" applet is a TCP/IP interface configuration and routing
486          utility. You generally don't need "ip" to use busybox with
487          TCP/IP.
488
489config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
490        bool "ip address"
491        default n
492        depends on BUSYBOX_CONFIG_IP
493        help
494          Address manipulation support for the "ip" applet.
495
496config BUSYBOX_CONFIG_FEATURE_IP_LINK
497        bool "ip link"
498        default n
499        depends on BUSYBOX_CONFIG_IP
500        help
501          Configure network devices with "ip".
502
503config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
504        bool "ip route"
505        default n
506        depends on BUSYBOX_CONFIG_IP
507        help
508          Add support for routing table management to "ip".
509
510config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
511        bool "ip tunnel"
512        default n
513        depends on BUSYBOX_CONFIG_IP
514        help
515          Add support for tunneling commands to "ip".
516
517config BUSYBOX_CONFIG_FEATURE_IP_RULE
518        bool "ip rule"
519        default n
520        depends on BUSYBOX_CONFIG_IP
521        help
522          Add support for rule commands to "ip".
523
524config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
525        bool "Support short forms of ip commands"
526        default n
527        depends on BUSYBOX_CONFIG_IP
528        help
529          Also support short-form of ip <OBJECT> commands:
530          ip addr   -> ipaddr
531          ip link   -> iplink
532          ip route  -> iproute
533          ip tunnel -> iptunnel
534          ip rule   -> iprule
535
536          Say N unless you desparately need the short form of the ip
537          object commands.
538
539config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
540        bool "Support displaying rarely used link types"
541        default n
542        depends on BUSYBOX_CONFIG_IP
543        help
544          If you are not going to use links of type "frad", "econet",
545          "bif" etc, you probably don't need to enable this.
546          Ethernet, wireless, infrared, ppp/slip, ip tunnelling
547          link types are supported without this option selected.
548
549config BUSYBOX_CONFIG_IPADDR
550        bool
551        default n
552        depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
553
554config BUSYBOX_CONFIG_IPLINK
555        bool
556        default n
557        depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
558
559config BUSYBOX_CONFIG_IPROUTE
560        bool
561        default n
562        depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
563
564config BUSYBOX_CONFIG_IPTUNNEL
565        bool
566        default n
567        depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
568
569config BUSYBOX_CONFIG_IPRULE
570        bool
571        default n
572        depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
573
574config BUSYBOX_CONFIG_IPCALC
575        bool "ipcalc"
576        default n
577        help
578          ipcalc takes an IP address and netmask and calculates the
579          resulting broadcast, network, and host range.
580
581config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
582        bool "Fancy IPCALC, more options, adds 1 kbyte"
583        default n
584        depends on BUSYBOX_CONFIG_IPCALC
585        help
586          Adds the options hostname, prefix and silent to the output of
587          "ipcalc".
588
589config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
590        bool "Enable long options"
591        default n
592        depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
593        help
594          Support long options for the ipcalc applet.
595
596config BUSYBOX_CONFIG_NAMEIF
597        bool "nameif"
598        default n
599        select BUSYBOX_CONFIG_FEATURE_SYSLOG
600        help
601          nameif is used to rename network interface by its MAC address.
602          Renamed interfaces MUST be in the down state.
603          It is possible to use a file (default: /etc/mactab)
604          with list of new interface names and MACs.
605          Maximum interface name length: IFNAMSIZ = 16
606          File fields are separated by space or tab.
607          File format:
608          # Comment
609          new_interface_name    XX:XX:XX:XX:XX:XX
610
611config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
612        bool "Extended nameif"
613        default n
614        depends on BUSYBOX_CONFIG_NAMEIF
615        help
616          This extends the nameif syntax to support the bus_info and driver
617          checks. The syntax is compatible to the normal nameif.
618          File format:
619            new_interface_name  driver=asix bus=usb-0000:00:08.2-3
620            new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
621            new_interface_name  mac=00:80:C8:38:91:B5
622            new_interface_name  00:80:C8:38:91:B5
623
624config BUSYBOX_CONFIG_NC
625        bool "nc"
626        default y
627        help
628          A simple Unix utility which reads and writes data across network
629          connections.
630
631config BUSYBOX_CONFIG_NETMSG
632        bool "netmsg"
633        default y
634        help
635          simple program for sending udp broadcast messages
636
637config BUSYBOX_CONFIG_NC_SERVER
638        bool "Netcat server options (-l)"
639        default n
640        depends on BUSYBOX_CONFIG_NC
641        help
642          Allow netcat to act as a server.
643
644config BUSYBOX_CONFIG_NC_EXTRA
645        bool "Netcat extensions (-eiw and filename)"
646        default n
647        depends on BUSYBOX_CONFIG_NC
648        help
649          Add -e (support for executing the rest of the command line after
650          making or receiving a successful connection), -i (delay interval for
651          lines sent), -w (timeout for initial connection).
652
653config BUSYBOX_CONFIG_NETSTAT
654        bool "netstat"
655        default y
656        help
657          netstat prints information about the Linux networking subsystem.
658
659config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
660        bool "Enable wide netstat output"
661        default y
662        depends on BUSYBOX_CONFIG_NETSTAT
663        help
664          Add support for wide columns. Useful when displaying IPv6 addresses
665          (-W option).
666
667config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
668        bool "Enable PID/Program name output"
669        default y
670        depends on BUSYBOX_CONFIG_NETSTAT
671        help
672          Add support for -p flag to print out PID and program name.
673          +700 bytes of code.
674
675config BUSYBOX_CONFIG_NSLOOKUP
676        bool "nslookup"
677        default y
678        help
679          nslookup is a tool to query Internet name servers.
680
681config BUSYBOX_CONFIG_NTPD
682        bool "ntpd"
683        default n
684        help
685          The NTP client/server daemon.
686
687config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
688        bool "Make ntpd usable as a NTP server"
689        default n
690        depends on BUSYBOX_CONFIG_NTPD
691        help
692          Make ntpd usable as a NTP server. If you disable this option
693          ntpd will be usable only as a NTP client.
694
695config BUSYBOX_CONFIG_PING
696        bool "ping"
697        default y
698        help
699          ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
700          elicit an ICMP ECHO_RESPONSE from a host or gateway.
701
702config BUSYBOX_CONFIG_PING6
703        bool "ping6"
704        default y
705        depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
706        help
707          This will give you a ping that can talk IPv6.
708
709config BUSYBOX_CONFIG_FEATURE_FANCY_PING
710        bool "Enable fancy ping output"
711        default y
712        depends on BUSYBOX_CONFIG_PING
713        help
714          Make the output from the ping applet include statistics, and at the
715          same time provide full support for ICMP packets.
716
717config BUSYBOX_CONFIG_PSCAN
718        bool "pscan"
719        default n
720        help
721          Simple network port scanner.
722
723config BUSYBOX_CONFIG_ROUTE
724        bool "route"
725        default y
726        help
727          Route displays or manipulates the kernel's IP routing tables.
728
729config BUSYBOX_CONFIG_SLATTACH
730        bool "slattach"
731        default n
732        help
733          slattach is a small utility to attach network interfaces to serial
734          lines.
735
736#config TC
737#       bool "tc"
738#       default n
739#       help
740#         show / manipulate traffic control settings
741#
742#config FEATURE_TC_INGRESS
743#       def_bool n
744#       depends on TC
745
746config BUSYBOX_CONFIG_TELNET
747        bool "telnet"
748        default y
749        help
750          Telnet is an interface to the TELNET protocol, but is also commonly
751          used to test other simple protocols.
752
753config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
754        bool "Pass TERM type to remote host"
755        default y
756        depends on BUSYBOX_CONFIG_TELNET
757        help
758          Setting this option will forward the TERM environment variable to the
759          remote host you are connecting to. This is useful to make sure that
760          things like ANSI colors and other control sequences behave.
761
762config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
763        bool "Pass USER type to remote host"
764        default n
765        depends on BUSYBOX_CONFIG_TELNET
766        help
767          Setting this option will forward the USER environment variable to the
768          remote host you are connecting to. This is useful when you need to
769          log into a machine without telling the username (autologin). This
770          option enables `-a' and `-l USER' arguments.
771
772config BUSYBOX_CONFIG_TELNETD
773        bool "telnetd"
774        default y
775        select BUSYBOX_CONFIG_FEATURE_SYSLOG
776        help
777          A daemon for the TELNET protocol, allowing you to log onto the host
778          running the daemon. Please keep in mind that the TELNET protocol
779          sends passwords in plain text. If you can't afford the space for an
780          SSH daemon and you trust your network, you may say 'y' here. As a
781          more secure alternative, you should seriously consider installing the
782          very small Dropbear SSH daemon instead:
783                http://matt.ucc.asn.au/dropbear/dropbear.html
784
785          Note that for busybox telnetd to work you need several things:
786          First of all, your kernel needs:
787                  UNIX98_PTYS=y
788                  DEVPTS_FS=y
789
790          Next, you need a /dev/pts directory on your root filesystem:
791
792                  $ ls -ld /dev/pts
793                  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
794
795          Next you need the pseudo terminal master multiplexer /dev/ptmx:
796
797                  $ ls -la /dev/ptmx
798                  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
799
800          Any /dev/ttyp[0-9]* files you may have can be removed.
801          Next, you need to mount the devpts filesystem on /dev/pts using:
802
803                  mount -t devpts devpts /dev/pts
804
805          You need to be sure that Busybox has LOGIN and
806          FEATURE_SUID enabled. And finally, you should make
807          certain that Busybox has been installed setuid root:
808
809                chown root.root /bin/busybox
810                chmod 4755 /bin/busybox
811
812          with all that done, telnetd _should_ work....
813
814
815config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
816        bool "Support standalone telnetd (not inetd only)"
817        default y
818        depends on BUSYBOX_CONFIG_TELNETD
819        help
820          Selecting this will make telnetd able to run standalone.
821
822config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
823        bool "Support -w SEC option (inetd wait mode)"
824        default n
825        depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
826        help
827          This option allows you to run telnetd in "inet wait" mode.
828          Example inetd.conf line (note "wait", not usual "nowait"):
829
830          telnet stream tcp wait root /bin/telnetd telnetd -w10
831
832          In this example, inetd passes _listening_ socket_ as fd 0
833          to telnetd when connection appears.
834          telnetd will wait for connections until all existing
835          connections are closed, and no new connections
836          appear during 10 seconds. Then it exits, and inetd continues
837          to listen for new connections.
838
839          This option is rarely used. "tcp nowait" is much more usual
840          way of running tcp services, including telnetd.
841          You most probably want to say N here.
842
843config BUSYBOX_CONFIG_TFTP
844        bool "tftp"
845        default n
846        help
847          This enables the Trivial File Transfer Protocol client program. TFTP
848          is usually used for simple, small transfers such as a root image
849          for a network-enabled bootloader.
850
851config BUSYBOX_CONFIG_TFTPD
852        bool "tftpd"
853        default n
854        help
855          This enables the Trivial File Transfer Protocol server program.
856          It expects that stdin is a datagram socket and a packet
857          is already pending on it. It will exit after one transfer.
858          In other words: it should be run from inetd in nowait mode,
859          or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
860
861config BUSYBOX_CONFIG_FEATURE_TFTP_GET
862        bool "Enable \"get\" command"
863        default n
864        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
865        help
866          Add support for the GET command within the TFTP client. This allows
867          a client to retrieve a file from a TFTP server.
868          Also enable upload support in tftpd, if tftpd is selected.
869
870config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
871        bool "Enable \"put\" command"
872        default n
873        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
874        help
875          Add support for the PUT command within the TFTP client. This allows
876          a client to transfer a file to a TFTP server.
877          Also enable download support in tftpd, if tftpd is selected.
878
879config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
880        bool "Enable 'blksize' and 'tsize' protocol options"
881        default n
882        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
883        help
884          Allow tftp to specify block size, and tftpd to understand
885          "blksize" and "tsize" options.
886
887config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
888        bool "Enable tftp progress meter"
889        default n
890        depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
891        help
892          Show progress bar.
893
894config BUSYBOX_CONFIG_TFTP_DEBUG
895        bool "Enable debug"
896        default n
897        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
898        help
899          Make tftp[d] print debugging messages on stderr.
900          This is useful if you are diagnosing a bug in tftp[d].
901
902config BUSYBOX_CONFIG_TRACEROUTE
903        bool "traceroute"
904        default y
905        help
906          Utility to trace the route of IP packets.
907
908config BUSYBOX_CONFIG_TRACEROUTE6
909        bool "traceroute6"
910        default n
911        depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
912        help
913          Utility to trace the route of IPv6 packets.
914
915config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
916        bool "Enable verbose output"
917        default y
918        depends on BUSYBOX_CONFIG_TRACEROUTE
919        help
920          Add some verbosity to traceroute. This includes among other things
921          hostnames and ICMP response types.
922
923config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
924        bool "Enable loose source route"
925        default n
926        depends on BUSYBOX_CONFIG_TRACEROUTE
927        help
928          Add option to specify a loose source route gateway
929          (8 maximum).
930
931config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
932        bool "Use ICMP instead of UDP"
933        default n
934        depends on BUSYBOX_CONFIG_TRACEROUTE
935        help
936          Add option -I to use ICMP ECHO instead of UDP datagrams.
937
938source package/busybox/config/networking/udhcp/Config.in
939
940config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
941        string "ifup udhcpc command line options"
942        default "-R -n"
943        depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
944        help
945          Command line options to pass to udhcpc from ifup.
946          Intended to alter options not available in /etc/network/interfaces.
947          (IE: --syslog --background etc...)
948
949config BUSYBOX_CONFIG_VCONFIG
950        bool "vconfig"
951        default y
952        help
953          Creates, removes, and configures VLAN interfaces
954
955config BUSYBOX_CONFIG_WGET
956        bool "wget"
957        default y
958        help
959          wget is a utility for non-interactive download of files from HTTP,
960          HTTPS, and FTP servers.
961
962config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
963        bool "Enable a nifty process meter (+2k)"
964        default y
965        depends on BUSYBOX_CONFIG_WGET
966        help
967          Enable the transfer progress bar for wget transfers.
968
969config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
970        bool "Enable HTTP authentication"
971        default y
972        depends on BUSYBOX_CONFIG_WGET
973        help
974          Support authenticated HTTP transfers.
975
976config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
977        bool "Enable long options"
978        default y
979        depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
980        help
981          Support long options for the wget applet.
982
983config BUSYBOX_CONFIG_ZCIP
984        bool "zcip"
985        default n
986        select BUSYBOX_CONFIG_FEATURE_SYSLOG
987        help
988          ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
989          It's a daemon that allocates and defends a dynamically assigned
990          address on the 169.254/16 network, requiring no system administrator.
991
992          See http://www.zeroconf.org for further details, and "zcip.script"
993          in the busybox examples.
994
995config BUSYBOX_CONFIG_TCPSVD
996        bool "tcpsvd"
997        default n
998        help
999          tcpsvd listens on a TCP port and runs a program for each new
1000          connection.
1001
1002config BUSYBOX_CONFIG_TUNCTL
1003        bool "tunctl"
1004        default n
1005        help
1006          tunctl creates or deletes tun devices.
1007
1008config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
1009        bool "Support owner:group assignment"
1010        default n
1011        depends on BUSYBOX_CONFIG_TUNCTL
1012        help
1013          Allow to specify owner and group of newly created interface.
1014          340 bytes of pure bloat. Say no here.
1015
1016config BUSYBOX_CONFIG_UDPSVD
1017        bool "udpsvd"
1018        default n
1019        help
1020          udpsvd listens on an UDP port and runs a program for each new
1021          connection.
1022
1023endmenu
Note: See TracBrowser for help on using the repository browser.