source: trunk/package/kernel/modules/block.mk @ 27037

Last change on this file since 27037 was 27037, checked in by nbd, 6 years ago

x86: remove pata-amd driver from generic x86 images, add addition cs553x modules

The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.

Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).

Signed-off-by: Philip Prindeville <philipp@…>

  • Property svn:eol-style set to native
File size: 15.7 KB
Line 
1#
2# Copyright (C) 2006-2010 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7
8BLOCK_MENU:=Block Devices
9
10define KernelPackage/aoe
11  SUBMENU:=$(BLOCK_MENU)
12  TITLE:=ATA over Ethernet support
13  KCONFIG:=CONFIG_ATA_OVER_ETH
14  FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
15  AUTOLOAD:=$(call AutoLoad,30,aoe)
16endef
17
18define KernelPackage/aoe/description
19  Kernel support for ATA over Ethernet
20endef
21
22$(eval $(call KernelPackage,aoe))
23
24
25define KernelPackage/ata-core
26  SUBMENU:=$(BLOCK_MENU)
27  TITLE:=Serial and Parallel ATA support
28  DEPENDS:=@PCI_SUPPORT +kmod-scsi-core @(!TARGET_ubicom32||!TARGET_etrax||!TARGET_x86)
29  KCONFIG:=CONFIG_ATA
30  FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
31  AUTOLOAD:=$(call AutoLoad,21,libata,1)
32endef
33
34$(eval $(call KernelPackage,ata-core))
35
36
37define AddDepends/ata
38  SUBMENU:=$(BLOCK_MENU)
39  DEPENDS+=!TARGET_x86:kmod-ata-core $(1)
40endef
41
42
43define KernelPackage/ata-ahci
44  TITLE:=AHCI Serial ATA support
45  KCONFIG:=CONFIG_SATA_AHCI
46  FILES:=$(LINUX_DIR)/drivers/ata/ahci.ko
47  ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
48    FILES += $(LINUX_DIR)/drivers/ata/libahci.ko
49    AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
50  else
51    AUTOLOAD:=$(call AutoLoad,41,ahci,1)
52  endif
53  $(call AddDepends/ata)
54endef
55
56define KernelPackage/ata-ahci/description
57 Support for AHCI Serial ATA controllers.
58endef
59
60$(eval $(call KernelPackage,ata-ahci))
61
62
63define KernelPackage/ata-artop
64  TITLE:=ARTOP 6210/6260 PATA support
65  KCONFIG:=CONFIG_PATA_ARTOP
66  FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
67  AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
68  $(call AddDepends/ata)
69endef
70
71define KernelPackage/ata-artop/description
72 PATA support for ARTOP 6210/6260 host controllers.
73endef
74
75$(eval $(call KernelPackage,ata-artop))
76
77
78define KernelPackage/ata-nvidia-sata
79  TITLE:=Nvidia Serial ATA support
80  KCONFIG:=CONFIG_SATA_NV
81  FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
82  AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
83  $(call AddDepends/ata)
84endef
85
86$(eval $(call KernelPackage,ata-nvidia-sata))
87
88
89define KernelPackage/ata-pdc202xx-old
90  SUBMENU:=$(BLOCK_MENU)
91  TITLE:=Older Promise PATA controller support
92  DEPENDS:=kmod-ata-core
93  KCONFIG:= \
94       CONFIG_ATA_SFF=y \
95       CONFIG_PATA_PDC_OLD
96  FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
97  AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
98endef
99
100define KernelPackage/ata-pdc202xx-old/description
101 This option enables support for the Promise 20246, 20262, 20263,
102 20265 and 20267 adapters.
103endef
104
105$(eval $(call KernelPackage,ata-pdc202xx-old))
106
107
108define KernelPackage/ata-piix
109  TITLE:=Intel PIIX PATA/SATA support
110  KCONFIG:=CONFIG_ATA_PIIX
111  FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
112  AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
113  $(call AddDepends/ata)
114endef
115
116define KernelPackage/ata-piix/description
117 SATA support for Intel ICH5/6/7/8 series host controllers and
118 PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
119endef
120
121$(eval $(call KernelPackage,ata-piix))
122
123
124define KernelPackage/ata-sil
125  TITLE:=Silicon Image SATA support
126  KCONFIG:=CONFIG_SATA_SIL
127  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
128  AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
129  $(call AddDepends/ata)
130endef
131
132define KernelPackage/ata-sil/description
133 Support for Silicon Image Serial ATA controllers.
134endef
135
136$(eval $(call KernelPackage,ata-sil))
137
138
139define KernelPackage/ata-sil24
140  TITLE:=Silicon Image 3124/3132 SATA support
141  KCONFIG:=CONFIG_SATA_SIL24
142  FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
143  AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
144  $(call AddDepends/ata)
145endef
146
147define KernelPackage/ata-sil24/description
148 Support for Silicon Image 3124/3132 Serial ATA controllers.
149endef
150
151$(eval $(call KernelPackage,ata-sil24))
152
153
154define KernelPackage/ata-via-sata
155  TITLE:=VIA SATA support
156  KCONFIG:=CONFIG_SATA_VIA
157  FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
158  AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
159  $(call AddDepends/ata)
160endef
161
162define KernelPackage/ata-via-sata/description
163 This option enables support for VIA Serial ATA.
164endef
165
166$(eval $(call KernelPackage,ata-via-sata))
167
168
169define KernelPackage/block2mtd
170  SUBMENU:=$(BLOCK_MENU)
171  TITLE:=Block device MTD emulation
172  KCONFIG:=CONFIG_MTD_BLOCK2MTD
173  FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
174endef
175
176$(eval $(call KernelPackage,block2mtd))
177
178
179define KernelPackage/dm
180  SUBMENU:=$(BLOCK_MENU)
181  TITLE:=Device Mapper
182  # All the "=n" are unnecessary, they're only there
183  # to stop the config from asking the question.
184  # MIRROR is M because I've needed it for pvmove.
185  KCONFIG:= \
186        CONFIG_BLK_DEV_MD=n \
187        CONFIG_DM_DEBUG=n \
188        CONFIG_DM_UEVENT=n \
189        CONFIG_DM_DELAY=n \
190        CONFIG_DM_MULTIPATH=n \
191        CONFIG_DM_ZERO=n \
192        CONFIG_DM_SNAPSHOT=n \
193        CONFIG_DM_LOG_USERSPACE=n \
194        CONFIG_MD=y \
195        CONFIG_BLK_DEV_DM \
196        CONFIG_DM_CRYPT \
197        CONFIG_DM_MIRROR
198  FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
199  AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
200endef
201
202define KernelPackage/dm/description
203 Kernel module necessary for LVM2 support
204endef
205
206$(eval $(call KernelPackage,dm))
207
208
209define KernelPackage/md-mod
210  SUBMENU:=$(BLOCK_MENU)
211  TITLE:=MD RAID
212  KCONFIG:= \
213       CONFIG_MD=y \
214       CONFIG_BLK_DEV_MD=m \
215       CONFIG_MD_AUTODETECT=y \
216       CONFIG_MD_FAULTY=n
217  FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
218  AUTOLOAD:=$(call AutoLoad,27,md-mod)
219endef
220
221define KernelPackage/md-mod/description
222 Kernel RAID md module (md-mod.ko).
223 You will need to select at least one RAID level module below.
224endef
225
226$(eval $(call KernelPackage,md-mod))
227
228
229define KernelPackage/md/Depends
230  SUBMENU:=$(BLOCK_MENU)
231  DEPENDS:=kmod-md-mod $(1)
232endef
233
234
235define KernelPackage/md-linear
236$(call KernelPackage/md/Depends,)
237  TITLE:=RAID Linear Module
238  KCONFIG:=CONFIG_MD_LINEAR=m
239  FILES:=$(LINUX_DIR)/drivers/md/linear.ko
240  AUTOLOAD:=$(call AutoLoad,28,linear)
241endef
242
243define KernelPackage/md-linear/description
244 RAID "Linear" or "Append" driver module (linear.ko)
245endef
246
247$(eval $(call KernelPackage,md-linear))
248
249
250define KernelPackage/md-raid0
251$(call KernelPackage/md/Depends,)
252  TITLE:=RAID0 Module
253  KCONFIG:=CONFIG_MD_RAID0=m
254  FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
255  AUTOLOAD:=$(call AutoLoad,28,raid0)
256endef
257
258define KernelPackage/md-raid0/description
259 RAID Level 0 (Striping) driver module (raid0.ko)
260endef
261
262$(eval $(call KernelPackage,md-raid0))
263
264
265define KernelPackage/md-raid1
266$(call KernelPackage/md/Depends,)
267  TITLE:=RAID1 Module
268  KCONFIG:=CONFIG_MD_RAID1=m
269  FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
270  AUTOLOAD:=$(call AutoLoad,28,raid1)
271endef
272
273define KernelPackage/md-raid1/description
274 RAID Level 1 (Mirroring) driver (raid1.ko)
275endef
276
277$(eval $(call KernelPackage,md-raid1))
278
279
280define KernelPackage/md-raid10
281$(call KernelPackage/md/Depends,)
282  TITLE:=RAID10 Module
283  KCONFIG:=CONFIG_MD_RAID10=m
284  FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
285  AUTOLOAD:=$(call AutoLoad,28,raid10)
286endef
287
288define KernelPackage/md-raid10/description
289 RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
290endef
291
292$(eval $(call KernelPackage,md-raid10))
293
294
295define KernelPackage/md-raid456
296$(call KernelPackage/md/Depends,)
297  TITLE:=RAID Level 456 Driver
298  KCONFIG:= \
299       CONFIG_XOR_BLOCKS=m \
300       CONFIG_ASYNC_CORE=m \
301       CONFIG_ASYNC_MEMCPY=m \
302       CONFIG_ASYNC_XOR=m \
303       CONFIG_ASYNC_PQ=m \
304       CONFIG_ASYNC_RAID6_RECOV=m \
305       CONFIG_ASYNC_RAID6_TEST=n \
306       CONFIG_MD_RAID6_PQ=m \
307       CONFIG_MD_RAID456=m \
308       CONFIG_MULTICORE_RAID456=n
309  FILES:= \
310        $(LINUX_DIR)/crypto/xor.ko \
311        $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
312        $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
313        $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
314        $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
315        $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
316        $(LINUX_DIR)/drivers/md/raid456.ko
317  # Additional files with kernel-dependent locations or presence
318  # For Linux >= 2.6.36
319  ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.36)), 1)
320    FILES+= \
321        $(LINUX_DIR)/lib/raid6/raid6_pq.ko
322  # For Linux < 2.6.36
323  else
324    FILES+= \
325        $(LINUX_DIR)/drivers/md/raid6_pq.ko
326  endif
327  AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
328endef
329
330define KernelPackage/md-raid456/description
331 RAID Level 4,5,6 kernel module (raid456.ko)
332
333 Includes the following modules required by
334 raid456.ko:
335    xor.ko
336    async_tx.ko
337    async_xor.ko
338    async_memcpy.ko
339    async_pq.ko
340    async_raid5_recov.ko
341    raid6_pq.ko
342endef
343
344$(eval $(call KernelPackage,md-raid456))
345
346
347define KernelPackage/md-multipath
348$(call KernelPackage/md/Depends,)
349  TITLE:=MD Multipath Module
350  KCONFIG:=CONFIG_MD_MULTIPATH=m
351  FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
352  AUTOLOAD:=$(call AutoLoad,29,multipath)
353endef
354
355define KernelPackage/md-multipath/description
356 Multipath driver module (multipath.ko)
357endef
358
359$(eval $(call KernelPackage,md-multipath))
360
361
362define KernelPackage/ide-core
363  SUBMENU:=$(BLOCK_MENU)
364  TITLE:=IDE (ATA/ATAPI) device support
365  DEPENDS:=@PCI_SUPPORT
366  KCONFIG:= \
367        CONFIG_IDE \
368        CONFIG_BLK_DEV_IDE \
369        CONFIG_BLK_DEV_IDEDISK \
370        CONFIG_IDE_GD \
371        CONFIG_IDE_GD_ATA=y \
372        CONFIG_IDE_GD_ATAPI=n \
373        CONFIG_IDEPCI_PCIBUS_ORDER=y \
374        CONFIG_BLK_DEV_IDEDMA_PCI=y \
375        CONFIG_BLK_DEV_IDEPCI=y
376  FILES:= \
377        $(LINUX_DIR)/drivers/ide/ide-core.ko \
378        $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
379  AUTOLOAD:= \
380        $(call AutoLoad,20,ide-core,1) \
381        $(call AutoLoad,40,ide-gd_mod,1)
382endef
383
384define KernelPackage/ide-core/description
385 Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
386 Includes:
387 - ide-core
388 - ide-gd_mod
389endef
390
391$(eval $(call KernelPackage,ide-core))
392
393
394define AddDepends/ide
395  SUBMENU:=$(BLOCK_MENU)
396  DEPENDS+=kmod-ide-core $(1)
397endef
398
399
400define KernelPackage/ide-generic
401  SUBMENU:=$(BLOCK_MENU)
402  DEPENDS:=@PCI_SUPPORT
403  TITLE:=Kernel support for generic PCI IDE chipsets
404  KCONFIG:=CONFIG_BLK_DEV_GENERIC
405  FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
406  AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
407  $(call AddDepends/ide)
408endef
409
410$(eval $(call KernelPackage,ide-generic))
411
412
413define KernelPackage/ide-generic-old
414  SUBMENU:=$(BLOCK_MENU)
415  TITLE:=Kernel support for generic (legacy) IDE chipsets
416  KCONFIG:=CONFIG_IDE_GENERIC
417  FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
418  AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
419  $(call AddDepends/ide)
420endef
421
422$(eval $(call KernelPackage,ide-generic-old))
423
424
425define KernelPackage/ide-aec62xx
426  TITLE:=Acard AEC62xx IDE driver
427  DEPENDS:=@PCI_SUPPORT
428  KCONFIG:=CONFIG_BLK_DEV_AEC62XX
429  FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
430  AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
431  $(call AddDepends/ide)
432endef
433
434define KernelPackage/ide-aec62xx/description
435 Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
436endef
437
438$(eval $(call KernelPackage,ide-aec62xx,1))
439
440
441define KernelPackage/ide-pdc202xx
442  TITLE:=Promise PDC202xx IDE driver
443  DEPENDS:=@PCI_SUPPORT
444  KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
445  FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
446  AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
447  $(call AddDepends/ide)
448endef
449
450define KernelPackage/ide-pdc202xx/description
451 Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
452 controllers.
453endef
454
455$(eval $(call KernelPackage,ide-pdc202xx))
456
457
458define KernelPackage/ide-it821x
459  TITLE:=ITE IT821x IDE driver
460  DEPENDS:=@PCI_SUPPORT
461  KCONFIG:=CONFIG_BLK_DEV_IT821X
462  FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
463  AUTOLOAD:=$(call AutoLoad,30,it821x,1)
464  $(call AddDepends/ide)
465endef
466
467define KernelPackage/ide-it821x/description
468  Kernel module for the ITE IDE821x IDE controllers.
469endef
470
471$(eval $(call KernelPackage,ide-it821x))
472
473
474define KernelPackage/cs5535
475  TITLE:=NSC/AMD CS5535 chipset support
476  DEPENDS:=@TARGET_x86
477  KCONFIG:=CONFIG_BLK_DEV_CS5535
478  FILES=$(LINUX_DIR)/drivers/ide/cs5535.ko
479  AUTOLOAD:=$(call AutoLoad,30,cs5535,1)
480  $(call AddDepends/ide)
481endef
482
483define KernelPackage/cs5535/description
484  Kernel module for the NSC/AMD CS5535 companion chip
485endef
486
487$(eval $(call KernelPackage,cs5535))
488
489
490define KernelPackage/cs5536
491  TITLE:=AMD CS5536 chipset support
492  DEPENDS:=@TARGET_x86
493  KCONFIG:=CONFIG_BLK_DEV_CS5536
494  FILES=$(LINUX_DIR)/drivers/ide/cs5536.ko
495  AUTOLOAD:=$(call AutoLoad,30,cs5536,1)
496  $(call AddDepends/ide)
497endef
498
499define KernelPackage/cs5536/description
500  Kernel module for the AMD CS5536 Geode LX companion chip
501endef
502
503$(eval $(call KernelPackage,cs5536))
504
505
506define KernelPackage/pata-cs5535
507  TITLE:=CS5535 PATA support
508  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
509  KCONFIG:=CONFIG_PATA_CS5535
510  FILES=$(LINUX_DIR)/drivers/ata/pata-cs5535.ko
511  AUTOLOAD:=$(call AutoLoad,30,pata-cs5535,1)
512  $(call AddDepends/ata)
513endef
514
515define KernelPackage/cs5535/description
516  Kernel module for the NSC/AMD CS5535 companion chip
517endef
518
519$(eval $(call KernelPackage,cs5535))
520
521
522define KernelPackage/pata-cs5536
523  TITLE:=CS5536 PATA support
524  DEPENDS:=@TARGET_x86 @PCI_SUPPORT
525  KCONFIG:=CONFIG_PATA_CS5536
526  FILES=$(LINUX_DIR)/drivers/ata/pata-cs5536.ko
527  AUTOLOAD:=$(call AutoLoad,30,pata-cs5536,1)
528  $(call AddDepends/ata)
529endef
530
531define KernelPackage/cs5536/description
532  Kernel module for the AMD CS5536 Geode LX companion chip
533endef
534
535$(eval $(call KernelPackage,cs5536))
536
537
538define KernelPackage/libsas
539  SUBMENU:=$(BLOCK_MENU)
540  TITLE:=SAS Domain Transport Attributes
541  DEPENDS:=@TARGET_x86
542  KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
543        CONFIG_SCSI_SAS_ATTRS \
544        CONFIG_SCSI_SAS_ATA=y \
545        CONFIG_SCSI_SAS_HOST_SMP=y \
546        CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
547  FILES:= \
548        $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
549        $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
550  AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
551endef
552
553define KernelPackage/libsas/description
554  SAS Domain Transport Attributes support.
555endef
556
557$(eval $(call KernelPackage,libsas,1))
558
559
560define KernelPackage/loop
561  SUBMENU:=$(BLOCK_MENU)
562  TITLE:=Loopback device support
563  KCONFIG:= \
564        CONFIG_BLK_DEV_LOOP \
565        CONFIG_BLK_DEV_CRYPTOLOOP=n
566  FILES:=$(LINUX_DIR)/drivers/block/loop.ko
567  AUTOLOAD:=$(call AutoLoad,30,loop)
568endef
569
570define KernelPackage/loop/description
571 Kernel module for loopback device support
572endef
573
574$(eval $(call KernelPackage,loop))
575
576
577define KernelPackage/mvsas
578  SUBMENU:=$(BLOCK_MENU)
579  TITLE:=Marvell 88SE6440 SAS/SATA driver
580  DEPENDS:=@TARGET_x86 +kmod-libsas
581  KCONFIG:=CONFIG_SCSI_MVSAS
582  ifneq ($(CONFIG_LINUX_2_6_30),)
583        FILES:=$(LINUX_DIR)/drivers/scsi/mvsas.ko
584  else
585        FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
586  endif
587  AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
588endef
589
590define KernelPackage/mvsas/description
591  Kernel support for the Marvell SAS SCSI adapters
592endef
593
594$(eval $(call KernelPackage,mvsas))
595
596
597define KernelPackage/nbd
598  SUBMENU:=$(BLOCK_MENU)
599  TITLE:=Network block device support
600  KCONFIG:=CONFIG_BLK_DEV_NBD
601  FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
602  AUTOLOAD:=$(call AutoLoad,30,nbd)
603endef
604
605define KernelPackage/nbd/description
606 Kernel module for network block device support
607endef
608
609$(eval $(call KernelPackage,nbd))
610
611
612define KernelPackage/scsi-core
613  SUBMENU:=$(BLOCK_MENU)
614  TITLE:=SCSI device support
615  DEPENDS:=@!TARGET_x86
616  KCONFIG:= \
617        CONFIG_SCSI \
618        CONFIG_BLK_DEV_SD
619  FILES:= \
620        $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
621        $(LINUX_DIR)/drivers/scsi/sd_mod.ko
622  AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
623endef
624
625$(eval $(call KernelPackage,scsi-core))
626
627
628define KernelPackage/scsi-generic
629  SUBMENU:=$(BLOCK_MENU)
630  TITLE:=Kernel support for SCSI generic
631  DEPENDS:=+!TARGET_x86:kmod-scsi-core
632  KCONFIG:= \
633        CONFIG_CHR_DEV_SG
634  FILES:= \
635        $(LINUX_DIR)/drivers/scsi/sg.ko
636  AUTOLOAD:=$(call AutoLoad,65,sg)
637endef
638
639$(eval $(call KernelPackage,scsi-generic))
640
641
642define KernelPackage/scsi-cdrom
643  SUBMENU:=$(BLOCK_MENU)
644  TITLE:=Kernel support for CD / DVD drives
645  DEPENDS:=+!TARGET_x86:kmod-scsi-core
646  KCONFIG:= \
647    CONFIG_BLK_DEV_SR \
648    CONFIG_BLK_DEV_SR_VENDOR=n
649  FILES:= \
650    $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
651    $(LINUX_DIR)/drivers/scsi/sr_mod.ko
652  AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
653endef
654
655$(eval $(call KernelPackage,scsi-cdrom))
656
Note: See TracBrowser for help on using the repository browser.