source: trunk/package/wpa_supplicant/files/config.mips @ 6501

Last change on this file since 6501 was 6501, checked in by pavlov, 9 years ago

same propset here as changeset:6500

  • Property svn:eol-style set to native
File size: 3.7 KB
Line 
1# Driver interface for Host AP driver
2#CONFIG_DRIVER_HOSTAP=y
3
4# Driver interface for Agere driver
5#CONFIG_DRIVER_HERMES=y
6# Change include directories to match with the local setup
7#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
8#CFLAGS += -I../../include/wireless
9
10# Driver interface for madwifi driver
11#CONFIG_DRIVER_MADWIFI=y
12# Change include directories to match with the local setup
13#CFLAGS += -I../madwifi/wpa
14
15# Driver interface for Prism54 driver
16# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
17# for developers only)
18#CONFIG_DRIVER_PRISM54=y
19
20# Driver interface for ndiswrapper
21#CONFIG_DRIVER_NDISWRAPPER=y
22
23# Driver interface for Atmel driver
24#CONFIG_DRIVER_ATMEL=y
25
26# Driver interface for Broadcom driver
27# CONFIG_DRIVER_BROADCOM=y
28# Example path for wlioctl.h; change to match your configuration
29# CFLAGS += -I../nvram/include
30
31# Driver interface for Intel ipw2100/2200 driver
32#CONFIG_DRIVER_IPW=y
33
34# Driver interface for generic Linux wireless extensions
35CONFIG_DRIVER_WEXT=y
36
37# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
38#CONFIG_DRIVER_BSD=y
39#CFLAGS += -I/usr/local/include
40#LIBS += -L/usr/local/lib
41
42# Driver interface for Windows NDIS
43#CONFIG_DRIVER_NDIS=y
44#CFLAGS += -I/usr/include/w32api/ddk
45#LIBS += -L/usr/local/lib
46# For native build using mingw
47#CONFIG_NATIVE_WINDOWS=y
48# Additional directories for cross-compilation on Linux host for mingw target
49#CFLAGS += -I/opt/mingw/mingw32/include/ddk
50#LIBS += -L/opt/mingw/mingw32/lib
51#CC=mingw32-gcc
52
53# Driver interface for development testing
54#CONFIG_DRIVER_TEST=y
55
56# Driver interface for wired Ethernet drivers
57CONFIG_DRIVER_WIRED=y
58
59# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
60# included)
61CONFIG_IEEE8021X_EAPOL=y
62
63# EAP-MD5 (automatically included if EAP-TTLS is enabled)
64CONFIG_EAP_MD5=y
65
66# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
67CONFIG_EAP_MSCHAPV2=y
68
69# EAP-TLS
70CONFIG_EAP_TLS=y
71
72# EAL-PEAP
73CONFIG_EAP_PEAP=y
74
75# EAP-TTLS
76CONFIG_EAP_TTLS=y
77
78# EAP-GTC
79CONFIG_EAP_GTC=y
80
81# EAP-OTP
82CONFIG_EAP_OTP=y
83
84# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
85#CONFIG_EAP_SIM=y
86
87# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
88#CONFIG_EAP_PSK=y
89
90# EAP-PAX
91#CONFIG_EAP_PAX=y
92
93# LEAP
94CONFIG_EAP_LEAP=y
95
96# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
97#CONFIG_EAP_AKA=y
98
99# PKCS#12 (PFX) support (used to read private key and certificate file from
100# a file that usually has extension .p12 or .pfx)
101CONFIG_PKCS12=y
102
103# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
104# engine.
105CONFIG_SMARTCARD=y
106
107# PC/SC interface for smartcards (USIM, GSM SIM)
108# Enable this if EAP-SIM or EAP-AKA is included
109#CONFIG_PCSC=y
110
111# Development testing
112#CONFIG_EAPOL_TEST=y
113
114# Replace native Linux implementation of packet sockets with libdnet/libpcap.
115# This will be automatically set for non-Linux OS.
116#CONFIG_DNET_PCAP=y
117
118# Include control interface for external programs, e.g, wpa_cli
119CONFIG_CTRL_IFACE=y
120
121# Include support for GNU Readline and History Libraries in wpa_cli.
122# When building a wpa_cli binary for distribution, please note that these
123# libraries are licensed under GPL and as such, BSD license may not apply for
124# the resulting binary.
125#CONFIG_READLINE=y
126
127# Remove debugging code that is printing out debug message to stdout.
128# This can be used to reduce the size of the wpa_supplicant considerably
129# if debugging code is not needed. The size reduction can be around 35%
130# (e.g., 90 kB).
131#CONFIG_NO_STDOUT_DEBUG=y
132
133# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
134# 35-50 kB in code size.
135#CONFIG_NO_WPA=y
136
137# Select configuration backend:
138# file = text file (e.g., wpa_supplicant.conf)
139CONFIG_BACKEND=file
Note: See TracBrowser for help on using the repository browser.