source: trunk/target/linux/brcm63xx/image/Makefile @ 19894

Last change on this file since 19894 was 19894, checked in by florian, 6 years ago

[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755)

  • Property svn:eol-style set to native
File size: 6.8 KB
Line 
1#
2# Copyright (C) 2006 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7include $(TOPDIR)/rules.mk
8include $(INCLUDE_DIR)/image.mk
9
10LOADADDR = 0x80010000           # RAM start + 16M
11KERNEL_ENTRY = $(LOADADDR)      # Newer kernels add a jmp to the kernel_entry at the start of the binary
12RAMSIZE = 0x01000000            # 64MB
13
14LOADER_MAKEOPTS= \
15                KDIR=$(KDIR) \
16                LOADADDR=$(LOADADDR) \
17                KERNEL_ENTRY=$(KERNEL_ENTRY) \
18                RAMSIZE=$(RAMSIZE)
19
20define trxalign/jffs2-128k
21-a 0x20000
22endef
23define trxalign/jffs2-64k
24-a 0x10000
25endef
26define trxalign/squashfs
27-a 1024
28endef
29
30define Image/Build/CFE
31        # Generate the tagged image
32        $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
33                -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
34                -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
35                -t $(4) -d "$(5)" $(7)
36#               -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
37
38endef
39
40define Image/Build/CFEAGPF
41        # Generate the tagged image
42        $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
43                -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
44                -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
45                -v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
46endef
47
48define Image/Build/RG100A
49        # Generate the tagged image
50        $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
51                -o $(BIN_DIR)/openwrt-$(6)-$(1)-$(7)-cfe.bin \
52                -b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
53                -k 0x20000 -n $(4) -t $(5)
54endef
55
56
57define Image/Build/RedBoot
58        cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
59        gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
60        $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
61        dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
62        dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
63endef
64
65define Image/Build/CFEOLD
66        $(TOPDIR)/scripts/brcmImage.pl -t -p    \
67                -b $(2) -c $(3)                 \
68                -k $(KDIR)/vmlinux.lzma.cfe     \
69                -r $(KDIR)/root.$(1)            \
70                -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
71endef
72
73define Build/Clean
74        $(MAKE) -C lzma-loader clean
75endef
76
77define Image/Prepare
78        # Standard LZMA kernel
79        cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
80
81        # CFE is a LZMA nazi! It took me hours to find out the parameters!
82        # Also I think lzma has a bug cause it generates different output depending on
83        # if you use stdin / stdout or not. Use files instead of stdio here, cause
84        # otherwise CFE will complain and not boot the image.
85        $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
86
87        # Strip out the length, CFE doesn't like this
88        dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
89        dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
90        rm -f $(KDIR)/vmlinux.lzma.tmp
91
92        # Build the LZMA loader
93        rm -f $(KDIR)/loader.gz
94        $(MAKE) -C lzma-loader \
95                BUILD_DIR="$(KDIR)" \
96                TARGET="$(KDIR)" \
97                clean install
98
99        echo -ne "\\x00" >> $(KDIR)/loader.gz
100        rm -f $(KDIR)/fs_mark
101        touch $(KDIR)/fs_mark
102        $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
103endef
104
105define Image/Build
106        dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
107        # Various routers
108        $(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe,)
109        $(call Image/Build/CFE,$(1),96345GW2,6345,bc221,,bc221,-y 5)
110        $(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300,)
111        $(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(REVISION),bc310,)
112        $(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bccfe,)
113        $(call Image/Build/CFE,$(1),96348GW,6348,bc221,,bc221,-y 5)
114        # BT Voyager V210_BTR
115        $(call Image/Build/CFE,$(1),V210_BB,6348,bc221,,btvgr,-y 5)
116        # BT Voyager V210_ROI, V210_WB
117        $(call Image/Build/CFE,$(1),V210,6348,bc221,,btvgr,-y 5)
118        # BT Voyager V2091_BTR
119        $(call Image/Build/CFE,$(1),V2091_BB,6348,bc221,,btvgr,-y 5)
120        # BT Voyager V2091_ROI, V2091_WB
121        $(call Image/Build/CFE,$(1),V2091,6348,bc221,,btvgr,-y 5)
122        # BT Voyager V220V, V220V_MGCP_BTR
123        $(call Image/Build/CFE,$(1),RTA1052V,6348,bc221,,btvgr,-y 5)
124        # BT Voyager V2110, V2110_AA, V2110_ROI
125        $(call Image/Build/CFE,$(1),V2110,6348,bc221,,btvgr,-y 5)
126        # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
127        $(call Image/Build/CFE,$(1),V2500V_BB,6348,bc221,,btvgr,-y 5)
128        # RTA1025W_16 (numerous routers)
129        $(call Image/Build/CFE,$(1),RTA1025W_16,6348,bc221,,btrta,-y 5)
130        # Tecom GW6000
131        $(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300,)
132        # Tecom GW6200
133        $(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
134        # Neufbox4
135        $(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
136        $(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(REVISION),nb4)
137        # Comtrend 536, 5621
138        $(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
139        $(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
140        # TP-Link 8900GB
141        $(call Image/Build/CFE,$(1),96348GW-11,6348,bc310,$(shell printf 'PRID\x89\x10\x00\x02'),td8900GB)
142        # Davolink DV201AMR
143        $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
144        # USR 9108
145        $(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
146        $(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
147        # NetGear DG834GT, DG834PN
148        $(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
149        $(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
150        # Belkin f5d7633
151        $(call Image/Build/CFE,$(1),96348GW-10,6348,bc310,,bc310)
152        # D-Link DSL-2640B
153        $(call Image/Build/CFE,$(1),D-4P-W,6348,bc310,,bc310)
154
155        # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
156        $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bccfe,,bccfe)
157        $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bc300,,bc300)
158
159        # Generic 6338 images
160        $(call Image/Build/CFE,$(1),6338GW,6338,bccfe,,bccfe)
161        $(call Image/Build/CFE,$(1),6338GW,6338,bc221,,bc221)
162        $(call Image/Build/CFE,$(1),6338GW,6338,bc300,,bc300)
163        $(call Image/Build/CFE,$(1),6338GW,6338,bc310,,bc310)
164        $(call Image/Build/CFE,$(1),6338W,6338,bccfe,,bccfe)
165        $(call Image/Build/CFE,$(1),6338W,6338,bc221,,bc221)
166        $(call Image/Build/CFE,$(1),6338W,6338,bc300,,bc300)
167        $(call Image/Build/CFE,$(1),6338W,6338,bc310,,bc310)
168
169        # Sagem F@ST2404
170        $(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
171        $(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
172        $(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(REVISION),bc310)
173        # Inventel Livebox
174        $(call Image/Build/RedBoot,livebox)
175        # D-Link DSL-2740B
176        $(call Image/Build/CFE,$(1),96358GW,6358,bc310,,dsl2740b)
177        # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
178        $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
179        $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
180        # Pirelli A226G
181        $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,bccfe,,bccfe)
182        $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,ag306,DWV_96358,a226g)
183       
184        # RG100A,DB120 etc.
185        $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,bc310,rg100a,bc310)
186
187endef
188
189$(eval $(call BuildImage))
Note: See TracBrowser for help on using the repository browser.