source: trunk/target/linux/ramips/image/Makefile @ 28078

Last change on this file since 28078 was 28078, checked in by juhosg, 5 years ago

ramips: rt305x: add support for the ZyXEL NBG-419N board

File size: 9.8 KB
Line 
1#
2# Copyright (C) 2008-2010 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7include $(TOPDIR)/rules.mk
8include $(INCLUDE_DIR)/image.mk
9
10define imgname
11$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
12endef
13
14VMLINUX:=$(IMG_PREFIX)-vmlinux
15UIMAGE:=$(IMG_PREFIX)-uImage
16ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
17        VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
18        UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
19endif
20
21ifeq ($(CONFIG_RALINK_RT288X),y)
22define kernel_entry
23-a 0x88000000 -e 0x88000000
24endef
25else
26define kernel_entry
27-a 0x80000000 -e 0x80000000
28endef
29endif
30
31define CompressLzma
32  $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
33endef
34
35define PatchKernelLzma
36        cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
37        $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
38        $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
39endef
40
41define MkImage
42        mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
43                -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
44                -d $(2) $(3)
45endef
46
47define Image/BuildKernel
48        cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
49        cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
50        $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
51        $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
52        cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
53endef
54
55define BuildFirmware/Generic
56        $(call PatchKernelLzma,$(2),$(3) $($(4)))
57        $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
58        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
59                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
60        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
61                echo "Warning: $(KDIR)/root.$(1) is too big"; \
62        else \
63                ( \
64                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
65                        dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
66                ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
67        fi; fi
68endef
69
70define BuildFirmware/Buffalo
71        $(call PatchKernelLzma,$(2),board=$(3) $($(4)))
72        $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
73        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
74                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
75        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
76                echo "Warning: $(KDIR)/root.$(1) is too big"; \
77        else \
78                buffalo-enc -p $(3) -v 1.76 \
79                        -i $(KDIR)/vmlinux-$(2).uImage \
80                        -o $(KDIR)/vmlinux-$(2).uImage.enc; \
81                buffalo-enc -p $(3) -v 1.76 \
82                        -i $(KDIR)/root.$(1) \
83                        -o $(KDIR)/root.$(2).enc; \
84                buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
85                        -l mlang8 -f 1 -r EU \
86                        -i $(KDIR)/vmlinux-$(2).uImage.enc \
87                        -i $(KDIR)/root.$(2).enc \
88                        -o $(call imgname,$(1),$(2))-factory-EU.bin; \
89        fi; fi
90endef
91
92define BuildFirmware/NW718
93        $(call PatchKernelLzma,$(2),$(3) $($(4)))
94        mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
95                -n "ARA1B4NCRNW718;1" \
96                -d "$(KDIR)/vmlinux-$(2).bin.lzma" \
97                "$(KDIR)/vmlinux-$(2).uImage"
98        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
99                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
100        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
101                echo "Warning: $(KDIR)/root.$(1) is too big"; \
102        else \
103                ( \
104                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
105                        dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
106                ) > $(call imgname,$(1),$(2))-factory.bin; \
107        fi; fi
108endef
109
110mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
111define Image/Build/Template/GENERIC_4M
112        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
113endef
114
115mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
116define Image/Build/Template/GENERIC_8M
117        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960)
118endef
119
120mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
121mtd_dir300b1_kernel_part_size=851968
122mtd_dir300b1_rootfs_part_size=3014656
123define Image/Build/Template/DIR300B1
124        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
125        mkwrgimg -s $(4) -d /dev/mtdblock/2 \
126                -i $(call imgname,$(1),$(2))-sysupgrade.bin \
127                -o $(call imgname,$(1),$(2))-factory.bin
128endef
129
130mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
131define Image/Build/Template/NW718
132        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
133        $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
134endef
135
136define Image/Build/Profile/DIR300B1
137        $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
138        $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
139        $(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
140endef
141
142mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
143mtd_rtg32b1_kernel_part_size=851968
144mtd_rtg32b1_rootfs_part_size=3014656
145define Image/Build/Template/RTG32B1
146        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
147endef
148
149define Image/Build/Profile/RTG32B1
150        $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
151endef
152
153define Image/Build/Profile/FONERA20N
154        $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
155endef
156
157define Image/Build/Profile/NBG419N
158        $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
159endef
160
161define Image/Build/Profile/NW718
162        $(call Image/Build/Template/NW718,$(1),nw718,NW718)
163endef
164
165define Image/Build/Profile/PWH2004
166        $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
167endef
168
169define Image/Build/Profile/V22RW2X2
170        $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
171endef
172
173mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
174define Image/Build/Profile/WHRG300N
175        $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
176        $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
177        ( \
178                echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
179                        dd bs=512 count=1 conv=sync; \
180                dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
181        ) > $(KDIR)/whr-g300n-tftp.tmp
182        buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
183                -o $(call imgname,$(1),whr-g300n)-tftp.bin
184endef
185
186define Image/Build/Profile/HW5503G
187        $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
188endef
189
190define Image/Build/Profile/MOFI35003GN
191        $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
192endef
193
194mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
195mtd_wcr150gn_kernel_part_size=851968
196mtd_wcr150gn_rootfs_part_size=3014656
197define Image/Build/Template/WCR150GN
198        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size))
199endef
200
201define Image/Build/Profile/WCR150GN
202        $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
203endef
204
205
206mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
207mtd_argus_atp52b_kernel_part_size=1179648
208mtd_argus_atp52b_rootfs_part_size=6815744
209define Image/Build/Template/ARGUS_ATP52B
210        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
211endef
212
213define Image/Build/Profile/ARGUS_ATP52B
214        $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
215endef
216
217mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
218mtd_f5d8235_kernel_part_size=1572864
219mtd_f5d8235_rootfs_part_size=6356992
220define Image/Build/Template/F5D8235V2
221        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
222endef
223
224define Image/Build/Profile/F5D8235V2
225        $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
226endef
227
228
229mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
230mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
231define Image/Build/Profile/WR5123GN
232        $(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
233        $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
234endef
235
236
237ifeq ($(CONFIG_RALINK_RT305X),y)
238define Image/Build/Profile/Default
239        $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
240        $(call Image/Build/Profile/DIR300B1,$(1))
241        $(call Image/Build/Profile/RTG32B1,$(1))
242        $(call Image/Build/Profile/FONERA20N,$(1))
243        $(call Image/Build/Profile/V22RW2X2,$(1))
244        $(call Image/Build/Profile/NBG419N,$(1))
245        $(call Image/Build/Profile/NW718,$(1))
246        $(call Image/Build/Profile/PWH2004,$(1))
247        $(call Image/Build/Profile/WHRG300N,$(1))
248        $(call Image/Build/Profile/WCR150GN,$(1))
249        $(call Image/Build/Profile/F5D8235V2,$(1))
250        $(call Image/Build/Profile/HW5503G,$(1))
251        $(call Image/Build/Profile/MOFI35003GN,$(1))
252        $(call Image/Build/Profile/WR5123GN,$(1))
253endef
254endif
255
256define Image/Build/squashfs
257        $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
258endef
259
260define Image/Build
261        $(call Image/Build/$(1))
262        dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
263        $(call Image/Build/Profile/$(PROFILE),$(1))
264endef
265
266$(eval $(call BuildImage))
Note: See TracBrowser for help on using the repository browser.