source: trunk/target/linux/ramips/image/Makefile @ 29617

Last change on this file since 29617 was 29617, checked in by juhosg, 4 years ago

ramips: rt288x: add support for the Belkin F5D8235-4 v1 board

Patch-by: Cezary Jackiewicz <cezary.jackiewicz@…>

File size: 11.8 KB
Line 
1#
2# Copyright (C) 2008-2011 OpenWrt.org
3#
4# This is free software, licensed under the GNU General Public License v2.
5# See /LICENSE for more information.
6#
7include $(TOPDIR)/rules.mk
8include $(INCLUDE_DIR)/image.mk
9
10define imgname
11$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
12endef
13
14VMLINUX:=$(IMG_PREFIX)-vmlinux
15UIMAGE:=$(IMG_PREFIX)-uImage
16ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
17        VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
18        UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
19endif
20
21ifeq ($(CONFIG_RALINK_RT288X),y)
22define kernel_entry
23-a 0x88000000 -e 0x88000000
24endef
25else
26define kernel_entry
27-a 0x80000000 -e 0x80000000
28endef
29endif
30
31define CompressLzma
32  $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
33endef
34
35define PatchKernelLzma
36        cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
37        $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
38        $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
39endef
40
41define MkImage
42        mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
43                -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
44                -d $(2) $(3)
45endef
46
47define Image/BuildKernel
48        cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
49        cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
50        $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
51        $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
52        cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
53endef
54
55define BuildFirmware/Generic
56        $(call PatchKernelLzma,$(2),$(3) $($(4)))
57        $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
58        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
59                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
60        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
61                echo "Warning: $(KDIR)/root.$(1) is too big"; \
62        else \
63                ( \
64                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
65                        dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
66                ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
67        fi; fi
68endef
69
70define BuildFirmware/Buffalo
71        $(call PatchKernelLzma,$(2),board=$(3) $($(4)))
72        $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage")
73        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
74                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
75        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
76                echo "Warning: $(KDIR)/root.$(1) is too big"; \
77        else \
78                buffalo-enc -p $(3) -v 1.76 \
79                        -i $(KDIR)/vmlinux-$(2).uImage \
80                        -o $(KDIR)/vmlinux-$(2).uImage.enc; \
81                buffalo-enc -p $(3) -v 1.76 \
82                        -i $(KDIR)/root.$(1) \
83                        -o $(KDIR)/root.$(2).enc; \
84                buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
85                        -l mlang8 -f 1 -r EU \
86                        -i $(KDIR)/vmlinux-$(2).uImage.enc \
87                        -i $(KDIR)/root.$(2).enc \
88                        -o $(call imgname,$(1),$(2))-factory-EU.bin; \
89        fi; fi
90endef
91
92define BuildFirmware/Buffalo2
93        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
94endef
95
96define BuildFirmware/NW718
97        $(call PatchKernelLzma,$(2),$(3) $($(4)))
98        mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
99                -n "ARA1B4NCRNW718;1" \
100                -d "$(KDIR)/vmlinux-$(2).bin.lzma" \
101                "$(KDIR)/vmlinux-$(2).uImage"
102        if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
103                echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
104        else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
105                echo "Warning: $(KDIR)/root.$(1) is too big"; \
106        else \
107                ( \
108                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
109                        dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
110                ) > $(call imgname,$(1),$(2))-factory.bin; \
111        fi; fi
112endef
113
114define BuildFirmware/Edimax
115        mkedimaximg -i $(call imgname,$(1),$(2))-sysupgrade.bin \
116                -o $(call imgname,$(1),$(2))-factory.bin \
117                -s $(3) -m $(4) -f $(5) -S $(6)
118endef
119
120mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
121define Image/Build/Template/GENERIC_4M
122        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
123endef
124
125mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
126kernel_size_8M=851968
127rootfs_size_8M=7208960
128define Image/Build/Template/GENERIC_8M
129        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
130endef
131
132mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
133mtd_dir300b1_kernel_part_size=851968
134mtd_dir300b1_rootfs_part_size=3014656
135define Image/Build/Template/DIR300B1
136        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
137        mkwrgimg -s $(4) -d /dev/mtdblock/2 \
138                -i $(call imgname,$(1),$(2))-sysupgrade.bin \
139                -o $(call imgname,$(1),$(2))-factory.bin
140endef
141
142mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
143define Image/Build/Template/NW718
144        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
145        $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
146endef
147
148console_OMNIEMB=ttyS1,57600
149mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
150define Image/Build/Template/OMNIEMB
151        $(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352)
152endef
153
154define Image/Build/Profile/DIR300B1
155        $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
156        $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
157        $(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
158endef
159
160mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
161mtd_rtg32b1_kernel_part_size=851968
162mtd_rtg32b1_rootfs_part_size=3014656
163define Image/Build/Template/RTG32B1
164        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
165endef
166
167define Image/Build/Profile/RTG32B1
168        $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1)
169endef
170
171define Image/Build/Profile/ESR9753
172        $(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753)
173endef
174
175define Image/Build/Profile/FONERA20N
176        $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
177        $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
178endef
179
180define Image/Build/Profile/BC2
181        $(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2)
182endef
183
184define Image/Build/Profile/NBG419N
185        $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N)
186endef
187
188define Image/Build/Profile/WL351
189        $(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351)
190endef
191
192define Image/Build/Profile/NW718
193        $(call Image/Build/Template/NW718,$(1),nw718,NW718)
194endef
195
196define Image/Build/Profile/OMNIEMB
197        $(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB)
198endef
199
200define Image/Build/Profile/PWH2004
201        $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
202endef
203
204define Image/Build/Profile/V22RW2X2
205        $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2)
206endef
207
208mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
209define Image/Build/Profile/WHRG300N
210        $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N)
211        $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088)
212        ( \
213                echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
214                        dd bs=512 count=1 conv=sync; \
215                dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \
216        ) > $(KDIR)/whr-g300n-tftp.tmp
217        buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
218                -o $(call imgname,$(1),whr-g300n)-tftp.bin
219endef
220
221define Image/Build/Profile/HW5503G
222        $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G)
223endef
224
225define Image/Build/Profile/MOFI35003GN
226        $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
227endef
228
229define Image/Build/Profile/WCR150GN
230        $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
231endef
232
233w502u_cmdline=board=W502U console=ttyS1,115200
234define Image/Build/Profile/W502U
235        $(call BuildFirmware/Generic,$(1),w502u,$(w502u_cmdline),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M))
236endef
237
238mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
239mtd_argus_atp52b_kernel_part_size=1179648
240mtd_argus_atp52b_rootfs_part_size=6815744
241define Image/Build/Template/ARGUS_ATP52B
242        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
243endef
244
245define Image/Build/Profile/ARGUS_ATP52B
246        $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B)
247endef
248
249mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
250mtd_f5d8235_kernel_part_size=1572864
251mtd_f5d8235_rootfs_part_size=6356992
252define Image/Build/Template/F5D8235V2
253        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
254endef
255
256define Image/Build/Profile/F5D8235V2
257        $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
258endef
259
260define Image/Build/Template/F5D8235V1
261        $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
262endef
263
264
265mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
266mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware)
267define Image/Build/Profile/WR5123GN
268        $(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656)
269        $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960)
270endef
271
272ifeq ($(CONFIG_RALINK_RT305X),y)
273define Image/Build/Profile/Default
274        $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
275        $(call Image/Build/Profile/BC2,$(1))
276        $(call Image/Build/Profile/DIR300B1,$(1))
277        $(call Image/Build/Profile/ESR9753,$(1))
278        $(call Image/Build/Profile/RTG32B1,$(1))
279        $(call Image/Build/Profile/FONERA20N,$(1))
280        $(call Image/Build/Profile/V22RW2X2,$(1))
281        $(call Image/Build/Profile/NBG419N,$(1))
282        $(call Image/Build/Profile/NW718,$(1))
283        $(call Image/Build/Profile/OMNIEMB,$(1))
284        $(call Image/Build/Profile/PWH2004,$(1))
285        $(call Image/Build/Profile/WHRG300N,$(1))
286        $(call Image/Build/Profile/WCR150GN,$(1))
287        $(call Image/Build/Profile/F5D8235V2,$(1))
288        $(call Image/Build/Profile/HW5503G,$(1))
289        $(call Image/Build/Profile/MOFI35003GN,$(1))
290        $(call Image/Build/Profile/W502U,$(1))
291        $(call Image/Build/Profile/WR5123GN,$(1))
292        $(call Image/Build/Profile/WL351,$(1))
293endef
294endif
295
296define Image/Build/Profile/F5D8235V1
297        $(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1)
298endef
299
300define Image/Build/Profile/RTN15
301        $(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
302endef
303
304mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
305define Image/Build/Profile/WLITX4AG300N
306        $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
307endef
308
309ifeq ($(CONFIG_RALINK_RT288X),y)
310define Image/Build/Profile/Default
311        $(call Image/Build/Profile/F5D8235V1,$(1))
312        $(call Image/Build/Profile/RTN15,$(1))
313        $(call Image/Build/Profile/WLITX4AG300N,$(1))
314endef
315endif
316
317define Image/Build/squashfs
318        $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
319endef
320
321define Image/Build
322        $(call Image/Build/$(1))
323        dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
324        $(call Image/Build/Profile/$(PROFILE),$(1))
325endef
326
327$(eval $(call BuildImage))
Note: See TracBrowser for help on using the repository browser.