Changeset 14993


Ignore:
Timestamp:
2009-03-23T17:22:56+01:00 (7 years ago)
Author:
hauke
Message:

[wpa_supplicant] bump to version 0.6.9.
Synced config with upstream version.

Location:
trunk/package/wpa_supplicant
Files:
4 edited

Legend:

Unmodified
Added
Removed
  • trunk/package/wpa_supplicant/Makefile

    r14545 r14993  
    1010 
    1111PKG_NAME:=wpa_supplicant 
    12 PKG_VERSION:=0.6.8 
     12PKG_VERSION:=0.6.9 
    1313PKG_RELEASE:=1 
    14 PKG_MD5SUM:=e933332490e0e5acfef2279457f1070a 
     14PKG_MD5SUM:=0efb8fcedf0a8acf6f423dfdb0658fdd 
    1515 
    1616PKG_SOURCE_URL:=http://hostap.epitest.fi/releases 
  • trunk/package/wpa_supplicant/config

    r11833 r14993  
    4242 
    4343# Driver interface for Host AP driver 
    44 # CONFIG_DRIVER_HOSTAP=y 
     44#CONFIG_DRIVER_HOSTAP=y 
    4545 
    4646# Driver interface for Agere driver 
     
    5252# Driver interface for madwifi driver 
    5353CONFIG_DRIVER_MADWIFI=y 
    54 # Change include directories to match with the local setup 
    55 #CFLAGS += -I../madwifi/wpa 
     54# Set include directory to the madwifi source tree 
     55#CFLAGS += -I../../madwifi 
    5656 
    5757# Driver interface for Prism54 driver 
     
    6666#CONFIG_DRIVER_ATMEL=y 
    6767 
    68 # Driver interface for Broadcom driver 
     68# Driver interface for old Broadcom driver 
     69# Please note that the newer Broadcom driver ("hybrid Linux driver") supports 
     70# Linux wireless extensions and does not need (or even work) with the old 
     71# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. 
    6972#CONFIG_DRIVER_BROADCOM=y 
    7073# Example path for wlioctl.h; change to match your configuration 
     
    7982# Driver interface for generic Linux wireless extensions 
    8083CONFIG_DRIVER_WEXT=y 
     84 
     85# Driver interface for Linux drivers using the nl80211 kernel interface 
     86CONFIG_DRIVER_NL80211=y 
    8187 
    8288# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) 
     
    107113CONFIG_DRIVER_WIRED=y 
    108114 
     115# Driver interface for the Broadcom RoboSwitch family 
     116#CONFIG_DRIVER_ROBOSWITCH=y 
     117 
    109118# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is 
    110119# included) 
     
    154163#CONFIG_EAP_AKA=y 
    155164 
     165# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). 
     166# This requires CONFIG_EAP_AKA to be enabled, too. 
     167#CONFIG_EAP_AKA_PRIME=y 
     168 
     169# Enable USIM simulator (Milenage) for EAP-AKA 
     170#CONFIG_USIM_SIMULATOR=y 
     171 
    156172# EAP-SAKE 
    157173#CONFIG_EAP_SAKE=y 
     
    164180# EAP-TNC and related Trusted Network Connect support (experimental) 
    165181#CONFIG_EAP_TNC=y 
     182 
     183# Wi-Fi Protected Setup (WPS) 
     184#CONFIG_WPS=y 
    166185 
    167186# EAP-IKEv2 
     
    308327#LIBS_p += -L$(LTM_PATH) 
    309328#endif 
     329# At the cost of about 4 kB of additional binary size, the internal LibTomMath 
     330# can be configured to include faster routines for exptmod, sqr, and div to 
     331# speed up DH and RSA calculation considerably 
     332#CONFIG_INTERNAL_LIBTOMMATH_FAST=y 
    310333 
    311334# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. 
     
    340363 
    341364# Include client MLME (management frame processing). 
    342 # This can be used to move MLME processing of Devicescape IEEE 802.11 stack 
    343 # into user space. 
     365# This can be used to move MLME processing of Linux mac80211 stack into user 
     366# space. Please note that this is currently only available with 
     367# driver_nl80211.c and only with a modified version of Linux kernel and 
     368# wpa_supplicant. 
    344369#CONFIG_CLIENT_MLME=y 
    345 # Currently, driver_devicescape.c build requires some additional parameters 
    346 # to be able to include some of the kernel header files. Following lines can 
    347 # be used to set these (WIRELESS_DEV must point to the root directory of the 
    348 # wireless-dev.git tree). 
    349 #WIRELESS_DEV=/usr/src/wireless-dev 
    350 #CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 
    351  
    352 # IEEE 802.11r/D4.1 (Fast BSS Transition) 
    353 # This enables an experimental implementation of a draft version of 
    354 # IEEE 802.11r. This draft is still subject to change, so it should be noted 
    355 # that this version may not comply with the final standard. 
     370 
     371# IEEE Std 802.11r-2008 (Fast BSS Transition) 
    356372#CONFIG_IEEE80211R=y 
    357373 
     
    361377# Enable privilege separation (see README 'Privilege separation' for details) 
    362378#CONFIG_PRIVSEP=y 
     379 
     380# Enable mitigation against certain attacks against TKIP by delaying Michael 
     381# MIC error reports by a random amount of time between 0 and 60 seconds 
     382#CONFIG_DELAYED_MIC_ERROR_REPORT=y 
  • trunk/package/wpa_supplicant/patches/110-roaming.patch

    r14545 r14993  
    22--- a/wpa_supplicant/events.c 
    33+++ b/wpa_supplicant/events.c 
    4 @@ -849,7 +849,7 @@ static void wpa_supplicant_event_assoc(s 
     4@@ -854,7 +854,7 @@ static void wpa_supplicant_event_assoc(s 
    55                wpa_supplicant_set_state(wpa_s, WPA_COMPLETED); 
    66        } else if (!ft_completed) { 
  • trunk/package/wpa_supplicant/patches/130-scanning.patch

    r14545 r14993  
    5151--- a/wpa_supplicant/events.c 
    5252+++ b/wpa_supplicant/events.c 
    53 @@ -536,7 +536,7 @@ wpa_supplicant_select_bss_non_wpa(struct 
     53@@ -541,7 +541,7 @@ wpa_supplicant_select_bss_non_wpa(struct 
    5454                                           "BSSID mismatch"); 
    5555                                continue; 
     
    6060                            !(ssid->key_mgmt & WPA_KEY_MGMT_WPS) && 
    6161                            !(ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA)) 
    62 @@ -546,7 +546,7 @@ wpa_supplicant_select_bss_non_wpa(struct 
     62@@ -551,7 +551,7 @@ wpa_supplicant_select_bss_non_wpa(struct 
    6363                                continue; 
    6464                        } 
     
    6969                              WPA_KEY_MGMT_FT_IEEE8021X | WPA_KEY_MGMT_FT_PSK | 
    7070                              WPA_KEY_MGMT_IEEE8021X_SHA256 | 
    71 @@ -635,6 +635,9 @@ static void wpa_supplicant_event_scan_re 
     71@@ -640,6 +640,9 @@ static void wpa_supplicant_event_scan_re 
    7272            wpa_s->disconnected) 
    7373                return; 
     
    7979                for (prio = 0; prio < wpa_s->conf->num_prio; prio++) { 
    8080                        selected = wpa_supplicant_select_bss( 
    81 @@ -647,6 +650,7 @@ static void wpa_supplicant_event_scan_re 
     81@@ -652,6 +655,7 @@ static void wpa_supplicant_event_scan_re 
    8282                        wpa_printf(MSG_DEBUG, "No APs found - clear blacklist " 
    8383                                   "and try again"); 
     
    8787                } else if (selected == NULL) { 
    8888                        break; 
    89 @@ -682,10 +686,12 @@ static void wpa_supplicant_event_scan_re 
     89@@ -687,10 +691,12 @@ static void wpa_supplicant_event_scan_re 
    9090                rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res); 
    9191        } else { 
     
    101101  
    102102 req_scan: 
    103 @@ -889,6 +895,9 @@ static void wpa_supplicant_event_disasso 
     103@@ -894,6 +900,9 @@ static void wpa_supplicant_event_disasso 
    104104        } 
    105105        if (wpa_s->wpa_state >= WPA_ASSOCIATED) 
Note: See TracChangeset for help on using the changeset viewer.