Ignore:
Timestamp:
2010-03-31T11:45:09+02:00 (7 years ago)
Author:
ralph
Message:

[uboot-lantiq] cleanup configuration handling

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/package/uboot-lantiq/Config.in

    r20604 r20628  
    1 config UBOOT_CONFIG 
    2    string "configuration file" 
    3    default "easy50712_DDR166M" 
    4    help 
    5      The configuration reflects the settings for a dedicated board hardware. 
    6      Select for Danube evaluation board easy50712_DDR166M . 
    7      Select for AR9 evaluation board easy50812_DDR166M . 
    8  
    9 config UBOOT_DDR_CONFIG 
    10    string "DDR configuration file" 
    11    default "danube_ref_ddr166.conf" 
    12    depends on UBOOT_RAMBOOT 
    13    help 
    14      The DDR configuration file should reflect the DDR memory device configuration . 
    15      It will be used to create a RAM boot image 
    16      Select for Danube evalution board danube_ref_ddr166.conf . 
    17      Select for AR9 evalution board easy50812.conf . 
     1config UBOOT_TARGET 
     2        string "target" 
     3        default "easy50712_DDR166M" 
     4        depends on PACKAGE_uboot-lantiq 
     5        help 
     6          The configuration reflects the settings for a dedicated board hardware. 
     7          Select for Danube evaluation board easy50712_DDR166M . 
     8          Select for AR9 evaluation board easy50812_DDR166M . 
    189 
    1910config UBOOT_RAMBOOT 
    20    bool "Enable RAM boot image" 
    21    help 
    22      Using the UART boot mode of the ROM code this image could be loaded to the RAM. 
    23      Executing the image in the RAM the functionality of the uboot image can be  
    24      tested first without touching the original flash. 
    25      Note: Be carefull, by saving the environment the flash will be modified. 
    26      The OWRT flash layout differs from the layout provided by Lantiq / Infineon. 
     11        bool "Enable RAM boot image" 
     12        depends on PACKAGE_uboot-lantiq 
     13        help 
     14          Using the UART boot mode of the ROM code this image could be loaded to the RAM. 
     15          While executing the image in the RAM the functionality of the uboot image can be  
     16          tested first without touching the original flash. 
     17          Note: Be carefull, by saving the environment the flash will be modified. 
     18          The OWRT flash layout differs from the layout provided by Lantiq / Infineon. 
    2719 
    28 config IFXMIPS_UBOOT_A800 
     20config UBOOT_RAMBOOT_DDR_CONFIG 
     21        string "DDR configuration file" 
     22        default "easy50712_DDR166M.conf" 
     23        depends on UBOOT_RAMBOOT 
     24        help 
     25          The DDR configuration file should reflect the DDR memory device configuration . 
     26          It will be used to create a RAM boot image 
     27          Select for Danube evalution board easy50712_DDR166M.conf . 
     28          Select for AR9 evalution board easy50812.conf . 
     29 
     30 
     31config UBOOT_A800 
    2932        bool "add ARV452 Switch bringup hack" 
    30         depends on PACKAGE_uboot-ifxmips 
     33        depends on PACKAGE_uboot-lantiq 
    3134        help 
    3235          Say Y, if you have a arv452 board (wav-281, A800, ..) 
Note: See TracChangeset for help on using the changeset viewer.