Changeset 33843 for trunk


Ignore:
Timestamp:
2012-10-18T09:23:02+02:00 (4 years ago)
Author:
juhosg
Message:

ramips: rt3883: add inital support for the DIR-645 board

Signed-off-by: Gabor Juhos <juhosg@…>

Location:
trunk/target/linux/ramips
Files:
1 added
4 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

    r33303 r33843  
    6363        RAMIPS_MACH_XDXRN502J,          /* unknown XDX-RN502J */ 
    6464        RAMIPS_MACH_UR_336UN,           /* UPVEL ROUTER */ 
    65          
     65 
    6666        /* RT3352 based machines */ 
    6767        RAMIPS_MACH_ALL5002,            /* Allnet ALL5002 */ 
     
    6969 
    7070        /* RT3662 based machines */ 
     71        RAMIPS_MACH_DIR_645,            /* D-Link DIR-645 */ 
    7172        RAMIPS_MACH_RT_N56U,            /* Asus RT-N56U */ 
    7273}; 
  • trunk/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig

    r30576 r33843  
    99        select RALINK_DEV_GPIO_LEDS 
    1010 
     11config RT3883_MACH_DIR_645 
     12        bool "D-Link DIR-645 support" 
     13        select RALINK_DEV_GPIO_BUTTONS 
     14        select RALINK_DEV_GPIO_LEDS 
     15 
    1116endmenu 
    1217 
  • trunk/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile

    r30498 r33843  
    1212obj-$(CONFIG_EARLY_PRINTK)              += early_printk.o 
    1313 
     14obj-$(CONFIG_RT3883_MACH_DIR_645)       += mach-dir-645.o 
    1415obj-$(CONFIG_RT3883_MACH_RT_N56U)       += mach-rt-n56u.o 
  • trunk/target/linux/ramips/rt3883/config-3.3

    r31737 r33843  
    6262CONFIG_IRQ_CPU=y 
    6363CONFIG_IRQ_FORCED_THREADING=y 
     64CONFIG_M25PXX_USE_FAST_READ=y 
    6465CONFIG_MDIO_BOARDINFO=y 
    6566# CONFIG_MII is not set 
     
    7172# CONFIG_MTD_CFI_INTELEXT is not set 
    7273CONFIG_MTD_CMDLINE_PARTS=y 
     74CONFIG_MTD_M25P80=y 
    7375CONFIG_MTD_PHYSMAP=y 
    7476CONFIG_NEED_DMA_MAP_STATE=y 
     
    9193CONFIG_RALINK_RT3883=y 
    9294CONFIG_RAMIPS_WDT=y 
     95CONFIG_RT3883_MACH_DIR_645=y 
    9396CONFIG_RT3883_MACH_RT_N56U=y 
    9497CONFIG_RTL8366_SMI=y 
     98CONFIG_RTL8367B_PHY=y 
    9599CONFIG_RTL8367_PHY=y 
    96100# CONFIG_SCSI_DMA is not set 
     
    100104CONFIG_SLUB=y 
    101105CONFIG_SOC_RT3883=y 
     106CONFIG_SPI=y 
     107CONFIG_SPI_MASTER=y 
     108CONFIG_SPI_RAMIPS=y 
    102109CONFIG_SWCONFIG=y 
    103110CONFIG_SYS_HAS_CPU_MIPS32_R1=y 
Note: See TracChangeset for help on using the changeset viewer.