{5} Assigned, Active Tickets by Owner (Full Description) (118 matches)

List tickets assigned, group by ticket owner. This report demonstrates the use of full-row display.

Results (1 - 100 of 118)

1 2

agb (1 match)

Ticket Summary Component Milestone Type Severity Created
Description
#7103 add the date to each news on openwrt.org website enhancement 2010-04-06

It has bugged me for years to see openwrt news without any date anywhere.

Everytime I go to openwrt.org , I am like :

  • when was this written ? and this ? and this ?

Otherwise, the homepage looks very nice and clear.


blogic (16 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#9388 improve lantiq nor code (lantiq.c) kernel Barrier Breaker 14.07 defect 2011-05-09

Hi All,

Lantiq xRX CPUs seems to have a bug on not aligned access to EBU bus (and flash...). For this reason the standard memcpy cannot used because, for optimization purpose, not aligned access can be uses (using lwl and lwr MIPS opcodes). The bus exception is also delayed... making the software debug hard.

The proposed patch fix the lq_copy_to function and use a 32-copy way to have better performance. The pointers are aligned in order to have the access to flash aligned.

Thanks to Lauterbach for the best jtag debugger in the history...


#12343 JFFS2 filesystem at Buffalo WBMR-HP-G300H base system Barrier Breaker 14.07 defect 2012-10-21

The "openwrt-lantiq-ar9-WBMR-jffs2-*k.image" images brick the router after flashing. Uimage (ramdisc) and squashfs work fine. The brick can be fixed by starting a openwrt-ramdisc an reflash the sqashfs image so its not highest priority but important to fix it.

At the moment i can't open the device because of the evil torx screws but i might get a fitting screw driver in a few days. Hopefully i can supply more details from tty then.


#20549 OpenWRT snapshot packages missing in ramips/mt7620 packages Chaos Calmer 15.05 defect 2015-09-18

https://downloads.openwrt.org/snapshots/trunk/ramips/mt7620/packages/packages/ is empty -- it should not be


#11235 ARV752DPW uboot ethernet not working packages Barrier Breaker 14.07 defect 2012-04-06

With flashed uboot from trunk, there is no working ethernet. The switch gets initialized, but trying to access the httpd fails. tftp also.

https://forum.openwrt.org/viewtopic.php?pid=160866#p160866


#11277 prebuilt arv752dpw image doesnt contain profile packages. packages Barrier Breaker 14.07 defect 2012-04-12

The openwrt-lantiq-danube-ARV752DPW-jffs2-64k.image doesnt contain wifi and usb drivers.. Also the others are missing, so installing via opkg is necessary.

https://dev.openwrt.org/browser/trunk/target/linux/lantiq/danube/profiles/002-arcadyan.mk ?


#11278 ARV752DPW wlan broken / mac addresses wrong packages Barrier Breaker 14.07 enhancement 2012-04-12

please append this into the case (offset is right, i checked) to make the wifi working:

ARV752DPW)
rt2x00_eeprom_extract "board_config" 1040 272
;;

also the ethernet mac is read from 0x16 in board_config. This is not the right one. The mac starting on 0x16 is the wlan one (as its printed on the enclosure).

the mac from eeprom is not the right one since every box would have the same mac.

i believe a good workaround would it be, to replace the eeprom mac directly after the extract with the mac read from 0x16.


#12105 [buffalo wbmr-hp-g300h] TX Ring full kernel error kernel Barrier Breaker 14.07 defect 2012-08-29

[164452.656000] eth0: tx ring full [164838.276000] eth0: tx ring full [165075.976000] eth0: tx ring full [165108.440000] eth0: tx ring full [165110.340000] eth0: tx ring full

I get these messages in kernel log.. what are they?

Trunk version r33266

I don't have any sort of problems with my lan/wan, but I'd like to know what's causing the errors :)


#12342 VLAN-config doesn't show up on LuCI at Buffalo WBMR-HP-G300H luci Barrier Breaker 14.07 defect 2012-10-21

The gigabit switch of the WBMR-HP-G300H supports vlan and it is possible to manage the ports by using swconfig. But there is no tap on luci.

Tested realease: Attitude Adjustment, r33838

swconfig:

swconfig dev eth0 show
Global attributes:
        enable_vlan: 0
Port 0:
        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
        pvid: 0
        link: port:1 link:down
Port 2:
        pvid: 0
        link: port:2 link:down
Port 3:
        pvid: 0
        link: port:3 link:down
Port 4:
        pvid: 0
        link: port:4 link:down
Port 5:
        pvid: 0
        link: port:5 link:up speed:1000baseT full-duplex txflow rxflow auto

dmesg:

[    0.000000] Linux version 3.3.8 (pen.is@vagi.na) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Fri Oct 19 01:08:45 CEST 2012
[    0.000000] SoC: AR9 rev 1.2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001954c (MIPS 34Kc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80299080, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyLTQ1,115200 rootfstype=squashfs,jffs2 machtype=WBMR
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00059da5
[    0.000000] Readback ErrCtl register=00059da5
[    0.000000] Memory: 58052k/65536k available (2273k kernel code, 7484k reserved, 380k data, 4000k init, 0k highmem)
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 333MHz
[    0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.048000] NET: Registered protocol family 16
[    0.056000] gpiochip_add: registered GPIOs 0 to 15 on device: ltq_gpio
[    0.060000] gpiochip_add: registered GPIOs 16 to 31 on device: ltq_gpio
[    0.064000] gpiochip_add: registered GPIOs 32 to 47 on device: ltq_gpio
[    0.068000] gpiochip_add: registered GPIOs 48 to 55 on device: ltq_gpio
[    0.072000] MIPS: machine is WBMR
[    0.100000] bio: create slab <bio-0> at 0
[    0.108000] PCI host bridge to bus 0000:00
[    0.112000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.116000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.120000] pci 0000:00:0e.0: [168c:0029] type 0 class 0x000280
[    0.120000] pci 0000:00:0e.0: reg 10: [mem 0x00000000-0x0000ffff]
[    0.120000] pci 0000:00:0e.0: PME# supported from D0 D3hot
[    0.120000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.124000] pci 0000:00:0e.0: SLOT:14 PIN:1 IRQ:30
[    0.128000] Switching to clocksource MIPS
[    0.136000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.148000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.160000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.168000] TCP reno registered
[    0.172000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.176000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.184000] NET: Registered protocol family 1
[    0.188000] PCI: CLS 0 bytes, default 32
[    0.324000] gptu: totally 6 16-bit timers/counters
[    0.332000] gptu: misc_register on minor 63
[    0.336000] gptu: succeeded to request irq 126
[    0.340000] gptu: succeeded to request irq 127
[    0.344000] gptu: succeeded to request irq 128
[    0.348000] gptu: succeeded to request irq 129
[    0.352000] gptu: succeeded to request irq 130
[    0.356000] gptu: succeeded to request irq 131
[    0.364000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.372000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.380000] msgmni has been set to 113
[    0.384000] io scheduler noop registered
[    0.388000] io scheduler deadline registered (default)
[    0.396000] ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
[    0.400000] console [ttyLTQ1] enabled, bootconsole disabled
[    0.416000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.424000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.428000]   Amd/Fujitsu Extended Query version 1.3.
[    0.436000] number of CFI chips: 1
[    0.436000] Creating 4 MTD partitions on "ltq_nor":
[    0.444000] 0x000000000000-0x000000040000 : "uboot"
[    0.452000] 0x000000040000-0x000000060000 : "uboot-env"
[    0.456000] 0x000000060000-0x000001f80000 : "linux"
[    0.464000] found squashfs behind kernel
[    0.464000] Creating 2 MTD partitions on "ltq_nor":
[    0.472000] 0x000000060000-0x000000157141 : "kernel"
[    0.476000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.492000] 0x000000157141-0x000001f80000 : "rootfs"
[    0.496000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.508000] mtd: partition "rootfs" set to be root filesystem
[    0.512000] mtd: partition "rootfs_data" created automatically, ofs=2A0000, len=1CE0000
[    0.520000] 0x0000002a0000-0x000001f80000 : "rootfs_data"
[    0.528000] 0x000001fe0000-0x000002000000 : "calibration"
[    0.680000] ltq_mii: probed
[    0.708000] eth0: Atheros AR8316 switch driver attached.
[    0.712000] ar8316: Using port 4 as switch port
[    5.832000] eth0: attached PHY [Atheros AR8216/AR8236/AR8316] (phy_addr=ltq_etop-fffffff:00, irq=-1)
[    5.844000] Registered led device: soc:blue:movie
[    5.844000] Registered led device: soc:red:internet
[    5.844000] Registered led device: soc:green:internet
[    5.844000] Registered led device: soc:green:adsl
[    5.844000] Registered led device: soc:green:wlan
[    5.844000] Registered led device: soc:red:security
[    5.848000] Registered led device: soc:green:power
[    5.848000] Registered led device: soc:red:power
[    5.848000] Registered led device: soc:green:usb
[    5.848000] TCP cubic registered
[    5.852000] NET: Registered protocol family 17
[    5.856000] 8021q: 802.1Q VLAN Support v1.8
[    5.880000] Freeing unused kernel memory: 4000k freed
[   10.120000] usbcore: registered new interface driver usbfs
[   10.124000] usbcore: registered new interface driver hub
[   10.132000] usbcore: registered new device driver usb
[   10.152000] NET: Registered protocol family 8
[   10.156000] NET: Registered protocol family 20
[   10.188000] Button Hotplug driver version 0.4.1
[   10.216000] PPP generic driver version 2.4.2
[   10.276000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.416000] NET: Registered protocol family 24
[   10.436000] nf_conntrack version 0.5.0 (969 buckets, 3876 max)
[   10.660000] IFX MEI Version 5.00.00
[   10.684000]
[   10.684000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   10.712000]     ATM (A1) firmware version 1.0.19
[   10.716000] ifxmips_atm: ATM init succeed
[   10.740000] dwc_otg: version 2.60a 22-NOV-2006
[   11.344000] DWC_otg: Using DMA mode
[   11.344000] dwc_otg dwc_otg.0: DWC OTG Controller
[   11.352000] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
[   11.356000] dwc_otg dwc_otg.0: irq 62, io mem 0xffffffffbe101000
[   11.368000] DWC_otg: Init: Port Power? op_state=1
[   11.368000] DWC_otg: Init: Power Port (0)
[   11.376000] hub 1-0:1.0: USB hub found
[   11.376000] hub 1-0:1.0: 1 port detected
[   11.396000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[   11.480000] DISCONNECTED PORT
[   14.232000] device eth0 entered promiscuous mode
[   14.236000] br-lan: port 1(eth0) entered forwarding state
[   14.240000] br-lan: port 1(eth0) entered forwarding state
[   16.244000] br-lan: port 1(eth0) entered forwarding state

#12518 Lantiq ase based platform soft lockup packages Barrier Breaker 14.07 defect 2012-11-22

As of trunk@33493, in linux-3.3.8/drivers/net/ethernet/lantiq_etop.c:ltq_etop_mdio_rd() the second 'while()' reading LTQ_ETOP_MDIO register hangs in an infinite loop. It happens after a random amount of time and with no particular system activity.

With the following patch my board (a Sitecom 300n wl-367 v1) is running stable since 6 hrs now


#12793 [lantiq] 'ltq_deu_ar9: Unknown symbol (...)' errors in dmesg packages Chaos Calmer 15.05 defect 2013-01-13

XWAY / AR9 board bb trunk r35121 default configuration

dmesg shows following errors:

[    6.464000] ltq_deu_ar9: Unknown symbol blkcipher_walk_done (err 0)
[    6.472000] ltq_deu_ar9: Unknown symbol blkcipher_walk_virt (err 0)
[    6.476000] ltq_deu_ar9: Unknown symbol crypto_register_shash (err 0)
[    6.484000] ltq_deu_ar9: Unknown symbol crypto_unregister_shash (err 0)
[    6.488000] ltq_deu_ar9: Unknown symbol crypto_blkcipher_type (err 0)

#13213 Add support for Dlink dir-300 revision b5 base system Chaos Calmer 15.05 enhancement 2013-03-20

All the hard work comes from https://github.com/Squonk42/OpenWrt-RT5350. I just added the dlink specific bits.

Not working in this upload:

  • wifi is working but has horrible performance. mtu 300 is needed to even login to the router via wifi
  • factory flashing is not working. Boot via initramsfs and flash sysupgrade from there.

Big thanks to cyberdo for his help.


#13332 r36276-RT3052 the router(f5d8235 v2) have no network connections even wifi and ethernet base system Chaos Calmer 15.05 defect 2013-04-09

Hi everyone! I am able to successfully to build the newest ROM(base on trunk r36276) that can boot on f5d8235 v2. However, the end result is the router will NOT have any network connections. In fact, both WIFI and Ethernet are absent. The following is the start inforamation FYI

U-Boot 1.1.3 (Nov  7 2008 - 00:24:27)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fa0000
=====config_usbotg =====
flash_protect ON: from 0xBF000000 to 0xBF02F0F7
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 10
============================================ 
Ralink UBoot Version: 3.2
-------------------------------------------- 
ASIC 3052_MP2 (Port5<->GigaSW)
DRAM COMPONENT: 128Mbits 
DRAM BUS: 32BIT 
Total memory: 32 MBytes
Date:Nov  7 2008  Time:00:24:27
============================================ 
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384 

 ##### The CPU freq = 384 MHZ #### 

 SDRAM bus set to 32 bit 
 SDRAM size =32 Mbytes

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP. 
 0 
   
3: System Boot system code via Flash.
## Booting image at bf050000 ...
   Image Name:   MIPS OpenWrt Linux-3.8.6
   Created:      2013-04-09   8:36:58 UTC

 System Control Status = 0x10440000 
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    943812 Bytes = 921.7 kB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.8.6 (david@david) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r36211) ) #1 Tue Apr 9 16:36:38 CST 2013
[    0.000000] SoC Type: Ralink RT3052 id:1 rev:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] memory window: 0x0, min: 2MB, max: 64MB
[    0.000000] memory detected: 32MB
[    0.000000] MIPS: machine is Belkin F5D8235 v2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 mtdparts=1f000000.cfi:320k(u-boot)ro,7744k(firmware),64k(nvram),64k(factory) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0002bc20
[    0.000000] Readback ErrCtl register=0002bc20
[    0.000000] Memory: 29496k/32768k available (2057k kernel code, 3272k reserved, 503k data, 188k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] CPU Clock: 384MHz
[    0.000000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.120000] bio: create slab <bio-0> at 0
[    0.130000] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.140000] Switching to clocksource MIPS
[    0.150000] NET: Registered protocol family 2
[    0.160000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.170000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.190000] TCP: Hash tables configured (established 512 bind 512)
[    0.200000] TCP: reno registered
[    0.210000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] NET: Registered protocol family 1
[    0.240000] rt-timer 10000100.timer: maximum frequncy is 7812Hz
[    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.310000] msgmni has been set to 57
[    0.320000] io scheduler noop registered
[    0.330000] io scheduler deadline registered (default)
[    0.340000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.350000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    0.370000] console [ttyS0] enabled, bootconsole disabled
[    0.370000] console [ttyS0] enabled, bootconsole disabled
[    0.390000] 1f000000.cfi: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.410000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.420000]   Amd/Fujitsu Extended Query version 1.1.
[    0.430000] number of CFI chips: 1
[    0.440000] 4 cmdlinepart partitions found on MTD device 1f000000.cfi
[    0.450000] Creating 4 MTD partitions on "1f000000.cfi":
[    0.460000] 0x000000000000-0x000000050000 : "u-boot"
[    0.480000] 0x000000050000-0x0000007e0000 : "firmware"
[    0.490000] found squashfs behind kernel
[    0.500000] Creating 2 MTD partitions on "1f000000.cfi":
[    0.510000] 0x000000050000-0x000000136704 : "kernel"
[    0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.550000] 0x000000136704-0x0000007e0000 : "rootfs"
[    0.560000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.580000] mtd: partition "rootfs" set to be root filesystem
[    0.600000] mtd: partition "rootfs_data" created automatically, ofs=410000, len=3D0000 
[    0.610000] 0x000000410000-0x0000007e0000 : "rootfs_data"
[    0.620000] 0x0000007e0000-0x0000007f0000 : "nvram"
[    0.640000] 0x0000007f0000-0x000000800000 : "factory"
[    0.650000] rt305x-esw 10110000.esw: link changed 0x00
[    0.670000] eth0: done loading
[    0.680000] TCP: cubic registered
[    0.680000] NET: Registered protocol family 17
[    0.690000] 8021q: 802.1Q VLAN Support v1.8
[    0.710000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.720000] Freeing unused kernel memory: 188k freed
[    3.320000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    6.740000] jffs2: notice: (386) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 14 of xref (0 dead, 2 orphan) found.
[    7.550000] SCSI subsystem initialized
[    7.710000] usbcore: registered new interface driver usbfs
[    7.720000] usbcore: registered new interface driver hub
[    7.740000] usbcore: registered new device driver usb
[    7.880000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.900000] ehci-platform: EHCI generic platform driver
[    8.020000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.050000] dwc_otg: version 2.72a 24-JUN-2008
[    8.060000] dwc_otg: Core Release: 2.66a
[    8.260000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled
[    8.280000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled
[    8.290000] dwc_otg: Using DMA mode
[    8.300000] dwc_otg: Device using Buffer DMA mode
[    8.310000] dwc_otg 101c0000.otg: DWC OTG Controller
[    8.320000] dwc_otg 101c0000.otg: new USB bus registered, assigned bus number 1
[    8.330000] dwc_otg 101c0000.otg: irq 26, io mem 0x101c0000
[    8.340000] dwc_otg: Init: Port Power? op_state=1
[    8.350000] dwc_otg: Init: Power Port (0)
[    8.360000] hub 1-0:1.0: USB hub found
[    8.370000] hub 1-0:1.0: 1 port detected
[    8.400000] Initializing USB Mass Storage driver...
[    8.410000] usbcore: registered new interface driver usb-storage
[    8.420000] USB Mass Storage support registered.
[   15.950000] rt305x-esw 10110000.esw: link changed 0x08
switching to jffs2
- init -

Please press Enter to activate this console. [   30.700000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[   30.710000] Backport based on wireless-testing.git master-2013-02-22
[   30.720000] compat.git: wireless-testing.git
[   30.890000] cfg80211: Calling CRDA to update world regulatory domain
[   30.900000] cfg80211: World regulatory domain updated:
[   30.910000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   30.920000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.940000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   30.960000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   30.970000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   30.990000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   31.920000] rt2800_wmac 10180000.wmac: failed to load eeprom property
[   31.930000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[   31.950000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2872, rf: 0008, rev: 0200.
[   32.030000] PPP generic driver version 2.4.2
[   32.440000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   32.720000] NET: Registered protocol family 24
[   32.800000] nf_conntrack version 0.5.0 (463 buckets, 1852 max)
[   33.680000] xt_time: kernel timezone is -0000
[   34.150000] usbcore: registered new interface driver usblp
[   34.310000] usbcore: registered new interface driver ums-alauda
[   34.340000] usbcore: registered new interface driver ums-cypress
[   34.370000] usbcore: registered new interface driver ums-datafab
[   34.400000] usbcore: registered new interface driver ums-freecom
[   34.430000] usbcore: registered new interface driver ums-isd200
[   34.460000] usbcore: registered new interface driver ums-jumpshot
[   34.490000] usbcore: registered new interface driver ums-karma
[   34.530000] usbcore: registered new interface driver ums-sddr09
[   34.560000] usbcore: registered new interface driver ums-sddr55
[   34.590000] usbcore: registered new interface driver ums-usbat
[   34.960000] u32 classifier
[   34.970000]     Performance counters on
[   34.970000]     input device check on
[   34.980000]     Actions configured
[   35.180000] Mirror/redirect action on
[   40.270000] device eth0.1 entered promiscuous mode
[   40.280000] device eth0 entered promiscuous mode
[   40.290000] br-lan: port 1(eth0.1) entered forwarding state
[   40.300000] br-lan: port 1(eth0.1) entered forwarding state
[   42.300000] br-lan: port 1(eth0.1) entered forwarding state
[   42.800000] ralink-wdt: timeout value 60 must be 0 < timeout <= 33, using 30

The router will stop at "ralink-wdt: timeout value 60 must be 0 < timeout <= 33, using 30"

If i press"ENTER", it will show like the below

BusyBox v1.19.4 (2013-04-06 11:53:35 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r36276)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------

run "uname -a",feedback as below

Linux OpenWrt 3.8.6 #1 Tue Apr 9 16:36:38 CST 2013 mips GNU/Linux

run "etc/init.d/network restart" feed back as below

root@OpenWrt:/# /etc/init.d/network restart
[  878.860000] br-lan: port 1(eth0.1) entered disabled state
[  878.880000] device eth0.1 left promiscuous mode
[  878.880000] br-lan: port 1(eth0.1) entered disabled state
[  879.150000] device eth0 left promiscuous mode
[  880.920000] device eth0.1 entered promiscuous mode
[  880.930000] device eth0 entered promiscuous mode
[  880.960000] br-lan: port 1(eth0.1) entered forwarding state
[  880.970000] br-lan: port 1(eth0.1) entered forwarding state
[  882.970000] br-lan: port 1(eth0.1) entered forwarding state
'radio0' is disabled
'radio0' is disabled
'radio0' is disabled

Run “logcat” and "dmesg"

root@OpenWrt:/# logcat
/bin/ash: logcat: not found
root@OpenWrt:/# dmesg
[    0.000000] Linux version 3.8.6 (david@david) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r36211) ) #1 Tue Apr 9 16:36:38 CST 2013
[    0.000000] SoC Type: Ralink RT3052 id:1 rev:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] memory window: 0x0, min: 2MB, max: 64MB
[    0.000000] memory detected: 32MB
[    0.000000] MIPS: machine is Belkin F5D8235 v2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80270470, node_mem_map 81002a80
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 mtdparts=1f000000.cfi:320k(u-boot)ro,7744k(firmware),64k(nvram),64k(factory) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00009c20
[    0.000000] Readback ErrCtl register=00009c20
[    0.000000] Memory: 29496k/32768k available (2057k kernel code, 3272k reserved, 503k data, 188k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] CPU Clock: 384MHz
[    0.070000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.120000] bio: create slab <bio-0> at 0
[    0.130000] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.140000] Switching to clocksource MIPS
[    0.150000] NET: Registered protocol family 2
[    0.160000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.170000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.190000] TCP: Hash tables configured (established 512 bind 512)
[    0.200000] TCP: reno registered
[    0.200000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] NET: Registered protocol family 1
[    0.240000] rt-timer 10000100.timer: maximum frequncy is 7812Hz
[    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.310000] msgmni has been set to 57
[    0.320000] io scheduler noop registered
[    0.320000] io scheduler deadline registered (default)
[    0.340000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.350000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    0.370000] console [ttyS0] enabled, bootconsole disabled
[    0.390000] 1f000000.cfi: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.410000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.420000]   Amd/Fujitsu Extended Query version 1.1.
[    0.430000] number of CFI chips: 1
[    0.440000] 4 cmdlinepart partitions found on MTD device 1f000000.cfi
[    0.450000] Creating 4 MTD partitions on "1f000000.cfi":
[    0.460000] 0x000000000000-0x000000050000 : "u-boot"
[    0.480000] 0x000000050000-0x0000007e0000 : "firmware"
[    0.490000] found squashfs behind kernel
[    0.500000] Creating 2 MTD partitions on "1f000000.cfi":
[    0.510000] 0x000000050000-0x000000136704 : "kernel"
[    0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.550000] 0x000000136704-0x0000007e0000 : "rootfs"
[    0.560000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.580000] mtd: partition "rootfs" set to be root filesystem
[    0.600000] mtd: partition "rootfs_data" created automatically, ofs=410000, len=3D0000 
[    0.610000] 0x000000410000-0x0000007e0000 : "rootfs_data"
[    0.630000] 0x0000007e0000-0x0000007f0000 : "nvram"
[    0.640000] 0x0000007f0000-0x000000800000 : "factory"
[    0.650000] rt305x-esw 10110000.esw: link changed 0x00
[    0.670000] eth0: done loading
[    0.680000] TCP: cubic registered
[    0.680000] NET: Registered protocol family 17
[    0.690000] 8021q: 802.1Q VLAN Support v1.8
[    0.710000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.720000] Freeing unused kernel memory: 188k freed
[    3.320000] Button Hotplug driver version 0.4.1
[    6.720000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x30000
[    6.740000] jffs2_build_filesystem(): unlocking the mtd device... done.
[    6.750000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[   39.100000] jffs2: notice: (386) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   39.910000] SCSI subsystem initialized
[   40.070000] usbcore: registered new interface driver usbfs
[   40.080000] usbcore: registered new interface driver hub
[   40.090000] usbcore: registered new device driver usb
[   40.230000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   40.250000] ehci-platform: EHCI generic platform driver
[   40.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   40.400000] dwc_otg: version 2.72a 24-JUN-2008
[   40.410000] dwc_otg: Core Release: 2.66a
[   40.610000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled
[   40.630000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled
[   40.640000] dwc_otg: Using DMA mode
[   40.650000] dwc_otg: Device using Buffer DMA mode
[   40.660000] dwc_otg 101c0000.otg: DWC OTG Controller
[   40.670000] dwc_otg 101c0000.otg: new USB bus registered, assigned bus number 1
[   40.680000] dwc_otg 101c0000.otg: irq 26, io mem 0x101c0000
[   40.690000] dwc_otg: Init: Port Power? op_state=1
[   40.700000] dwc_otg: Init: Power Port (0)
[   40.710000] hub 1-0:1.0: USB hub found
[   40.720000] hub 1-0:1.0: 1 port detected
[   40.740000] Initializing USB Mass Storage driver...
[   40.760000] usbcore: registered new interface driver usb-storage
[   40.770000] USB Mass Storage support registered.
[   63.030000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[   63.040000] Backport based on wireless-testing.git master-2013-02-22
[   63.050000] compat.git: wireless-testing.git
[   63.220000] cfg80211: Calling CRDA to update world regulatory domain
[   63.230000] cfg80211: World regulatory domain updated:
[   63.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   63.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   63.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   63.290000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   63.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   63.320000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   64.240000] rt2800_wmac 10180000.wmac: failed to load eeprom property
[   64.260000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[   65.830000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2872, rf: 0008, rev: 0200.
[   65.850000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   66.120000] PPP generic driver version 2.4.2
[   66.530000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   66.800000] NET: Registered protocol family 24
[   66.880000] nf_conntrack version 0.5.0 (463 buckets, 1852 max)
[   67.760000] xt_time: kernel timezone is -0000
[   68.230000] usbcore: registered new interface driver usblp
[   68.380000] usbcore: registered new interface driver ums-alauda
[   68.410000] usbcore: registered new interface driver ums-cypress
[   68.450000] usbcore: registered new interface driver ums-datafab
[   68.480000] usbcore: registered new interface driver ums-freecom
[   68.510000] usbcore: registered new interface driver ums-isd200
[   68.540000] usbcore: registered new interface driver ums-jumpshot
[   68.570000] usbcore: registered new interface driver ums-karma
[   68.600000] usbcore: registered new interface driver ums-sddr09
[   68.630000] usbcore: registered new interface driver ums-sddr55
[   68.670000] usbcore: registered new interface driver ums-usbat
[   69.040000] u32 classifier
[   69.040000]     Performance counters on
[   69.050000]     input device check on
[   69.060000]     Actions configured
[   69.260000] Mirror/redirect action on
[   75.310000] device eth0.1 entered promiscuous mode
[   75.320000] device eth0 entered promiscuous mode
[   75.330000] br-lan: port 1(eth0.1) entered forwarding state
[   75.340000] br-lan: port 1(eth0.1) entered forwarding state
[   77.340000] br-lan: port 1(eth0.1) entered forwarding state
[   77.740000] ralink-wdt: timeout value 60 must be 0 < timeout <= 33, using 30
[  878.860000] br-lan: port 1(eth0.1) entered disabled state
[  878.880000] device eth0.1 left promiscuous mode
[  878.880000] br-lan: port 1(eth0.1) entered disabled state
[  879.150000] device eth0 left promiscuous mode
[  880.920000] device eth0.1 entered promiscuous mode
[  880.930000] device eth0 entered promiscuous mode
[  880.960000] br-lan: port 1(eth0.1) entered forwarding state
[  880.970000] br-lan: port 1(eth0.1) entered forwarding state
[  882.970000] br-lan: port 1(eth0.1) entered forwarding state
root@OpenWrt:/# 

#13356 Asus RT-N10 Plus WPS led does not turn on packages Chaos Calmer 15.05 defect 2013-04-15

The WPS led blinks when in tftp mode (hold reset or WPS button while powering on), but it never lights at all once linux is booted.

Examining it once booted (via /sys/class/leds/asus:green:wps) shows the brightness set at 255, but the led is not lit. Setting brightness to 0 (and once at 0 back to 255) has no effect on the physical appearance of the LED

Instructions regarding flashing the rt-n10+ with openwrt indicate that the LED did at one point work.


#14309 gpio_free() / pinctrl doesnt work for ralink trunk kernel Chaos Calmer 15.05 defect 2013-10-11

there seems to be a missing link between gpio_free and pinctrl_free_gpio()
It just request a GPIO and freeing it at module unload. Reloading the module generates error (pin already used)
Here is the according dmesg: (Carambola1 with RT3052 using actual trunk 38333)

insmod gpio-test
[ 3814.150000] GPIO Test: requesting GPIO 12
[ 3814.150000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pio:12
rmmod gpio-test
[ 3825.000000] GPIO Test: freeing GPIO 12
insmod gpio-test # again
[ 3832.250000] GPIO Test: requesting GPIO 12
[ 3832.250000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pio:12
[ 3832.250000] rt2880-pinmux pinctrl.1: pin io12 already requested by pio:12; cannot claim for pio:12
[ 3832.260000] rt2880-pinmux pinctrl.1: pin-12 (pio:12) status -22
[ 3832.270000] GPIO Test: didn't get 12

Here is the code:

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/gpio.h>

#define DRV_NAME "GPIO Test"
#define PFX DRV_NAME ": "
#define GPIO_TEST_PIN 12

static int __init mymodule_init(void) {
    int err;
    printk (KERN_INFO PFX "requesting GPIO %d\n", GPIO_TEST_PIN);
    err = gpio_request(GPIO_TEST_PIN, "GPIO TEST");
    if (err ) {
        printk (KERN_ERR PFX "didn't get %d\n", GPIO_TEST_PIN);
        return -1;
    }
    return 0;
}

static void __exit mymodule_exit(void) {
   printk (KERN_INFO PFX "freeing GPIO %d\n", GPIO_TEST_PIN);
   gpio_free(GPIO_TEST_PIN);
   return;
}

module_init(mymodule_init);
module_exit(mymodule_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mister X");

#15057 Fix / Support for Both Versions of the BT ECI VG3503J. packages Barrier Breaker 14.07 defect 2014-02-20

There are two versions of the BT Openreach modem VG3503J 1-A-DC & "VG3503J-A-DC [1.1 vr9 chip]

From BT's opensource proj_cfg.h #define PROJ_MODEL_NAME "VG3503J 1-A-DC" #define PROJ_SIGNATURE "ECIBT_TP1A"

This VG3503J 1-A-DC is supported by openwrt and runs the ROM 1.0.5 and GPHY Firmware 0x8400. 2012 with vr9_phy22f_a1x.bin.

roj_ver.h

define DDR_TYPE 2 1 : DDR1, 2 : DDR2#if (DDR_TYPE == 1) DDR1 Bootloader Version

#define PROJ_BLOADER_VERSION_MAJOR_NUM 0#define 0#define PROJ_BLOADER_VERSION_MINOR_NUM 1#define PROJ_BLOADER_VERSION_SUB_MINOR_NUM 4#define PROJ_BLOADER_VERSION_TEST_NUM 0#elif (DDR_TYPE == 2) DDR2 Bootloader Version

#define PROJ_BLOADER_VERSION_MAJOR_NUM 0#define

PROJ_BLOADER_VERSION_MINOR_NUM 2#define PROJ_BLOADER_VERSION_SUB_MINOR_NUM 4#define PROJ_BLOADER_VERSION_TEST_NUM 0#endif#define PROJ_IMAGE_VERSION_MAJOR_NUM 1#define PROJ_IMAGE_VERSION_MINOR_NUM 1#define PROJ_IMAGE_VERSION_SUB_MINOR_NUM 6#define PROJ_IMAGE_VERSION_TEST_NUM 0 Morgan add. Number 0 means formal release and will not be shown up.


This Newer VG3503J-A-DC Vesion uses ROM 1.1.4 and GPHY Firmware 0x0405.2013 and with vr9_phy22f_a2x.bin. [1.2 vr9 chip]

The lan ports are dead when openwrt current ECI xrx200 target.

BT Opensource "define PROJ_MODEL_ if it helps.

define PROJ_MODEL_NAME "VG3503J-A-DC" #define PROJ_SIGNATURE "ECIBT_TP1A"

#define PROJ_BLOADER_VERSION_MAJOR_NUM_STR "0"#define PROJ_BLOADER_VERSION_MINOR_NUM_STR "01"#define PROJ_BLOADER_VERSION_SUB_MINOR_NUM_STR "03"#define PROJ_IMAGE_VERSION_MAJOR_NUM 0#define PROJ_IMAGE_VERSION_MINOR_NUM 1#define PROJ_IMAGE_VERSION_SUB_MINOR_NUM 6

http://www.openreach.co.uk/orpg/home/products/super-fastfibreaccess/super-fastfibreaccess/landrgnu.do


If this could be fixed it would be great !

Thanks


#22271 Trunk error - r29260 - unknown user or group: dnsmasq packages defect 2016-04-26

Got this error after building and flashing latest Trunk


cshore (3 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#12410 boxbackup files do not end up in image packages Chaos Calmer 15.05 defect 2012-11-03

When the * option is used for boxbackup in make menuconfig and the configuration is subsequently saved, such that the following command: $ opkg list| grep boxback

has output: boxbackup - 0.11.1-2

This is a small selection of the binary files which are present on the build system are (with directories relative to openwrt/build_dir):

./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstoreaccounts ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstoreaccounts/bbstoreaccounts ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstoreaccounts/bbstoreaccounts.o ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupd ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupd/bbackupd.o ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupd/bbackupd ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupquery ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupquery/bbackupquery.o ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupquery/bbackupquery ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupobjdump ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupctl ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupctl/bbackupctl ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbackupctl/bbackupctl.o ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstored ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstored/bbstored ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/bin/bbstored/bbstored.o ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/release/test/bbackupd ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbstoreaccounts ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbstoreaccounts/bbstoreaccounts.cpp ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupd ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupd/win32/bbackupd.conf ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupd/bbackupd.cpp ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupd/bbackupd-config.in ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupd/bbackupd-config ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupquery ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupquery/bbackupquery.cpp ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupobjdump ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupobjdump/bbackupobjdump.cpp ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupctl ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbackupctl/bbackupctl.cpp ./target-mips_r2_uClibc-0.9.33.2/boxbackup-0.11.1/bin/bbstored

The build has been configured for the NetGear WNDR3800 family of devices, but it is not specific to that family alone.

The problem is thus that boxbackup is getting compiled, but is somehow not fully transferred into the image.


#12778 Extroot : error in script 55_determine_extroot_sysupgrade packages Barrier Breaker 14.07 defect 2013-01-10

Hello

I think there is a typo in the script '55_determine_extroot_sysupgrade' at line 17. Instead of if [ -f $md5sum_file ]; then, it must be if [ -f $er_md5sum_file ], isn't it ?

BR

Gilles Mazoyer


#10653 Can't mount exroot with UUID in Trunk (r29558) base system Barrier Breaker 14.07 defect 2011-12-22

I try to mount a usb disk as exroot in trunk (r29558) with /dev/sda1 it works OK but when I turn to use UUID it always mounted as /tmp/overlay-disabled.


cyrus (7 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#14298 Reconnect and IPv6 privacy extensions brake routing packages Chaos Calmer 15.05 defect 2013-10-08

In a case in which a client (Mac OS X) with IPv6 privacy extensions enabled is forced to reconnect, the routing gets broken. One has to restart 6relayed to get the connection working again.


#18402 odhcpd IPv6 Prefix Delegation issue base system Barrier Breaker 14.07 defect 2014-11-24

odhcpd doesn't provide an IPv6 PD if there's an alias interface with a static /64 IPv6 address. Example:

LAN:

public /56 provided via WAN DHCPv6 assignment-length 62

LAN_2 (br-lan):

fixed ULA /64 IPv6 address

In that case an IA-PD request from a DHCPv6 client (ISC dhcp client) is answered with "IA_PD status code NoPrefixAvail".

When LAN_2 is changed to:

fixed ULA /62 IPv6 address

odhcpd provides a prefix for both networks.

It seems that odhcpd returns the no-prefix error if it can't provide prefixes for all networks or if it can't assign a prefix for a single network out of multiple ones. It should return the error only if it can't assign any prefix at all.


#13275 Chaining 6relayd fragments the network packages Chaos Calmer 15.05 defect 2013-04-01

I currently run a LAN based on odhcp6c and 6relayd, and it works great.

The LAN uses the 192.168.1.0/24 and 2601:9:4600:3b::/64 subnets. As an experiment, I connected a second OpenWRT router to the network using WiFi in STA mode.

IPv4 works fine beause it's NATted to the 192.168.2.0/24 subnet, and IPv6 *almost* works. The clients share the same /64 as the primary network thanks to 6relayd, and are able to reach the Internet, scoring 10/10 on test-ipv6.com.

The problem is, 6relayd is asymmetric. Hosts behind the second router are unable to reach hosts on my primary network, unless I configure static routes for them. This is especially problematic because the second 6relayd automatically advertises "2601:9:4600:3b::1" as a DNS resolver.

I know that I could use WDS, or assign another /64 to the second network (if Comcast allowed shorter prefixes). But for the sake of argument, let's pretend the primary LAN is operated by my ISP, and I have no control over its settings. With IPv4, I can extend the network using NAT, but with IPv6, NAT is Evil™.

I think the concept of 6relayd is awesome, because it gives any user the power to extend a network without cooperation from the ISP. So are there plans to fix the subnet fragmentation problem by implementing the rest of RFC4389?

At the very least, 6relayd shouldn't advertise a DNS resolver that it knows will be unreachable.


#16922 Odhcpd complains about lo packages Chaos Calmer 15.05 defect 2014-06-29

I'm getting a lot of these in my logs:

Sun Jun 29 17:25:49 2014 daemon.warn odhcpd[780]: Failed to send to 2a01:e34:ec22:84a0:6dbc:855a:9052:d04b%lo (Operation not permitted)


#16923 Odhcpd in relay mode doesn't work at boot packages Chaos Calmer 15.05 defect 2014-06-29

My ISP is providing a single /64, so I'm running with the following configuration:

config dhcp wan6

option dhcpv6 relay option ra relay option ndp relay option master 1

config dhcp 'lan'

[...] option dhcpv6 'relay' option ra 'relay' option ndp relay

and same for wifi0 and wifi1 (I've unbridged the interfaces).

After I reboot, odhcpd is running (according to ps), but no global IPv6 has been assigned to the lan/wifi0/wifi1 interfaces, and no RAs are being sent. This can be worked around by logging in and doing

/etc/init.d/odhcpd restart

which causes the IPv6 addresses to be set.

--jch


#19602 Crash/softbrick when enabling IPv6/wan6 (@wan) on pppoe-wan in recent trunk packages defect 2015-05-05

As title says, this has been going on for a while (a month?).

To make sure it wasn't my configuration I decided to to a fresh installation with a default configuration. Everything went well up until the point where I added the wan6 (@wan, dhcpc6) interface. I suspect some kind of routing loop brings it down. After power cycling it's pingable.. for a while, then it dies again.

Booting in safemode, doing mount_root and removing the @wan interface makes the device functional again.

I'm currently reverted to BB since I need IPv6 but in time (some week from now) I should be able to help testing/resolving this bug. Still I thought I'd leave this ticket here in case it's something obvious.

Hardware is TP-Link TL-WDR4300 v1.


#20178 unstable ipv6 connectivity, odhcp6c invokes /lib/netifd/dhcpv6.script too often base system Chaos Calmer 15.05 defect 2015-07-25

My ISP is currently multicasting RAs from 4 different source ip addresses:

07:07:24.803144 cc:4e:24:1c:14:00 > 33:33:00:00:00:01, ethertype IPv6 (0x86dd), length 118: (class 0xc0, hlim 255, next-header ICMPv6 (58) payload length: 64) fe80::ce4e:24ff:fe1c:1400 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 64
	hop limit 64, Flags [none], pref medium, router lifetime 1800s, reachable time 0s, retrans time 0s
	  source link-address option (1), length 8 (1): cc:4e:24:1c:14:00
	  mtu option (5), length 8 (1):  1500
	  prefix info option (3), length 32 (4): 2001:8e0:9ff:2000::/64, Flags [onlink, auto], valid time 2592000s, pref. time 604800s
07:07:24.826919 cc:4e:24:1c:33:00 > 33:33:00:00:00:01, ethertype IPv6 (0x86dd), length 118: (class 0xc0, hlim 255, next-header ICMPv6 (58) payload length: 64) fe80::ce4e:24ff:fe1c:3300 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 64
	hop limit 64, Flags [none], pref medium, router lifetime 1800s, reachable time 0s, retrans time 0s
	  source link-address option (1), length 8 (1): cc:4e:24:1c:33:00
	  mtu option (5), length 8 (1):  1500
	  prefix info option (3), length 32 (4): 2001:8e0:9ff:2000::/64, Flags [onlink, auto], valid time 2592000s, pref. time 604800s
07:07:24.827699 02:e0:52:00:25:01 > 33:33:00:00:00:01, ethertype IPv6 (0x86dd), length 118: (class 0xc0, hlim 255, next-header ICMPv6 (58) payload length: 64) fe80:132::1 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 64
	hop limit 64, Flags [none], pref medium, router lifetime 1800s, reachable time 0s, retrans time 0s
	  source link-address option (1), length 8 (1): 02:e0:52:00:25:01
	  mtu option (5), length 8 (1):  1500
	  prefix info option (3), length 32 (4): 2001:8e0:9ff:2000::/64, Flags [onlink, auto], valid time 2592000s, pref. time 604800s
07:07:24.828420 02:e0:52:00:25:01 > 33:33:00:00:00:01, ethertype IPv6 (0x86dd), length 118: (class 0xc0, hlim 255, next-header ICMPv6 (58) payload length: 64) 2001:8e0:9ff:2000::1 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 64
	hop limit 64, Flags [none], pref medium, router lifetime 1800s, reachable time 0s, retrans time 0s
	  source link-address option (1), length 8 (1): 02:e0:52:00:25:01
	  mtu option (5), length 8 (1):  1500
	  prefix info option (3), length 32 (4): 2001:8e0:9ff:2000::/64, Flags [onlink, auto], valid time 2592000s, pref. time 604800s

Although they are all advertising the same prefix and come in at roughly the same time (usually within a few milliseconds every 30s), dhcp6c emits multiple ra-updated events:

Sat Jul 25 07:25:39 2015 eth0.2 ra-updated
Sat Jul 25 07:25:39 2015 RA_REACHABLE=0 RA_ADDRESSES=2001:8e0:9ff:2000:xxxx:xxxx:xxxx:xxxx/64,604800,2592000 SERVER=2001:8e0:40:11::254 SHLVL=2 RA_MTU=1500 RA_ROUTES=::/0,fe80::ce4e:24ff:fe1c:3300,1767,512 2001:8e0:9ff:2000::/64,,2592000,256 ::/0,fe80:132::1,1767,512 ::/0,fe80::ce4e:24ff:fe1c:1400,1800,512 PREFIXES=2001:8e0:xxxx:xxxx::/56,20
Sat Jul 25 07:25:39 2015 eth0.2 ra-updated
Sat Jul 25 07:25:39 2015 eth0.2 ra-updated
Sat Jul 25 07:25:40 2015 RA_REACHABLE=0 RA_ADDRESSES=2001:8e0:9ff:2000:xxxx:xxxx:xxxx:xxxx/64,604800,2592000 SERVER=2001:8e0:40:11::254 SHLVL=2 RA_MTU=1500 RA_ROUTES=::/0,fe80::ce4e:24ff:fe1c:3300,1800,512 2001:8e0:9ff:2000::/64,,2592000,256 ::/0,fe80:132::1,1767,512 ::/0,fe80::ce4e:24ff:fe1c:1400,1800,512 PREFIXES=2001:8e0:xxxx:xxxx::/56,20 
Sat Jul 25 07:25:40 2015 RA_REACHABLE=0 RA_ADDRESSES=2001:8e0:9ff:2000:xxxx:xxxx:xxxx:xxxx/64,604800,2592000 SERVER=2001:8e0:40:11::254 SHLVL=2 RA_MTU=1500 RA_ROUTES=::/0,fe80::ce4e:24ff:fe1c:3300,1800,512 2001:8e0:9ff:2000::/64,,2592000,256 ::/0,fe80:132::1,1800,512 ::/0,fe80::ce4e:24ff:fe1c:1400,1800,512 PREFIXES=2001:8e0:xxxx:xxxx::/56,20

Additionally, all instances of the script seem to be fired concurrently, potentially leading to race conditions.

On downstream interfaces where prefixes are delegated, this triggers spurious RA transmissions:

23:37:39.859586 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:37:39.860059 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:37:39.860492 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:37:41.088411 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:11.808657 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:11.809151 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:12.115866 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:13.037441 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:44.986535 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:44.986987 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:44.987356 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:38:45.908182 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:39:20.314863 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:39:20.315329 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:39:20.622034 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120
23:39:21.333370 IP6 fe80::xxxx:xxxx:xxxx:xxxx > ff02::1: ICMP6, router advertisement, length 120

See how every 30s, 4 RAs are emitted on the LAN side. I've taken a deeper look at them, they all announce the same values (prefix, link mtu, rdnss, route info) so they shouldn't be confusing any on-link node, but frequent and spurious RAs are a known cause of battery drain on mobile devices. (Note that this one might be an odhcpd bug, but RA emission lines up with script invocations).

More importantly, because /lib/netifd/dhcpv6.script refreshes route and address lifetimes in the kernel's FIB, this causes routing instability, interrupting traffic for about ~1s every 30-60s.

10:00:33.007279 IP6 2001:8e0:xxxx:xxxx::1 > 2001:8e0:xxxx:xxxx:94f0:8898:897f:117d: ICMP6, destination unreachable, unreachable route 2001:6b0:e:2018::138, length 80
10:00:33.007782 IP6 2001:8e0:xxxx:xxxx::1 > 2001:8e0:xxxx:xxxx:94f0:8898:897f:117d: ICMP6, destination unreachable, unreachable route 2001:6b0:e:2018::138, length 80
10:00:33.008197 IP6 2001:8e0:xxxx:xxxx::1 > 2001:8e0:xxxx:xxxx:94f0:8898:897f:117d: ICMP6, destination unreachable, unreachable route 2001:6b0:e:2018::138, length 80
[...]

Here's my relevant /etc/config/network entry:

config interface 'wan6'
	option ifname 'eth0.2'
	option proto 'dhcpv6'
	option reqaddress 'none' # don't request IA-NA
	option noslaaconly '1' # don't configure addresses from ISP RA pinfo (doesn't seem to work)

This is on a WDR3600 (env shows "board=TL-WDR4300") with Chaos Chalmer rc3.

Let me know if you need additional info and sorry for the long post :)


dangole (1 match)

Ticket Summary Component Milestone Type Severity Created
Description
#22086 No connection on WLAN in 2.4G base system Designated Driver (Trunk) defect 2016-03-22

I have some Xiaomi Miwifi Mini, and all working just fine... except radio1 (2.4G). Sometimes (not always) when you connect to this interface you cant navigate, even cant ping or ssh to my openwrt. If I connect to 5G SSID all just work fine.

I try differents configurations:

  • static IP on my sta
  • differents channels
  • differents hwmode
  • with open network (with encryption=none)

I think the problem can be related to MAC Address, if in my laptop, check de ARP, when the problem is going, the /proc/net/arp (in my linux) show:

$ iwconfig 
wlp2s0    IEEE 802.11abgn  ESSID:"Test2G"  
          Mode:Managed  Frequency:2.437 GHz  Access Point: F0:B4:29:55:9F:47   
          Bit Rate=144.4 Mb/s   Tx-Power=22 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-36 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1   Missed beacon:0

$ cat /proc/net/arp 
IP address       HW type     Flags       HW address            Mask     Device
192.168.10.1     0x1         0x0         00:00:00:00:00:00     *        wlp2s0

This is all my related setup:

# cat /etc/openwrt_release 
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='Bleeding Edge'
DISTRIB_REVISION='r49031'
DISTRIB_CODENAME='designated_driver'
DISTRIB_TARGET='ramips/mt7620'
DISTRIB_DESCRIPTION='OpenWrt Designated Driver r49031'
DISTRIB_TAINTS=''

# ifconfig wlan1
wlan1   Link encap:Ethernet  HWaddr F0:B4:29:55:9F:47  
          inet6 addr: fe80::f2b4:29ff:fe55:9f47/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2025 errors:0 dropped:0 overruns:0 frame:0
          TX packets:87 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:145785 (142.3 KiB)  TX bytes:18270 (17.8 KiB)


# iwconfig wlan1
wlan1   IEEE 802.11bgn  Mode:Master  Tx-Power=20 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off

# cat /etc/config/wireless
config wifi-device  radio1
        option type     mac80211
        option channel  6
        option hwmode   11g
        option path     'platform/10180000.wmac'
        option htmode   HT20
        # option log_level 1

config wifi-iface "private2g"
        option device 'radio1'
        option mode 'ap'
        option disassoc_low_ack 0
        option encryption 'none'
        option network 'lan'
        option ssid 'Test2G'
        option beacon_int 60
        option disabled 0

# cat /var/run/hostapd-phy1.conf 
driver=nl80211
logger_syslog=127
logger_syslog_level=1
logger_stdout=127
logger_stdout_level=1
hw_mode=g
channel=6


ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC12]

interface=wlan1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=internet
auth_algs=1
wpa=2
wpa_pairwise=CCMP TKIP
ssid=Test2G
bridge=br-lan
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
bssid=f0:b4:29:55:9f:47


# logread |grep 94:65:9c
Tue Mar 22 03:13:51 2016 daemon.info hostapd: wlan1: STA 94:65:9c:9f:a1:00 IEEE 802.11: authenticated
Tue Mar 22 03:13:51 2016 daemon.info hostapd: wlan1: STA 94:65:9c:9f:a1:00 IEEE 802.11: associated (aid 3)
Tue Mar 22 03:13:51 2016 daemon.info hostapd: wlan1: STA 94:65:9c:9f:a1:00 WPA: pairwise key handshake completed (RSN)
Tue Mar 22 03:13:51 2016 daemon.info dnsmasq-dhcp[4581]: DHCPREQUEST(br-lan) 192.168.10.200 94:65:9c:9f:a1:00 
Tue Mar 22 03:13:51 2016 daemon.info dnsmasq-dhcp[4581]: DHCPACK(br-lan) 192.168.10.200 94:65:9c:9f:a1:00 LaptopLinux
Tue Mar 22 03:13:54 2016 daemon.info dnsmasq-dhcp[4581]: DHCPREQUEST(br-lan) 192.168.10.200 94:65:9c:9f:a1:00 
Tue Mar 22 03:13:54 2016 daemon.info dnsmasq-dhcp[4581]: DHCPACK(br-lan) 192.168.10.200 94:65:9c:9f:a1:00 LaptopLinux

Again, the exact same network config is to my wlan0 interface (5G) and all work fine. When I have this problem, I change to 5G SSID and my laptop goes online again.


florian (6 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#13636 Cannot mount rootfs packages Barrier Breaker 14.07 defect 2013-06-03

Image: generic, titan(all) Hardware: RTP300

outcome: Booting... [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat Mar 23 14:45:52 UTC 2013 [ 0.000000] gpiochip_add: registered GPIOs 0 to 50 on device: titan-gpio [ 0.000000] titan-gpio: registered 51 GPIOs [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00018448 (MIPS 4KEc) [ 0.000000] TI AR7 (TNETV1050), ID: 0x0007, Revision: 0x02 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 01000000 @ 14000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00014000 -> 0x00015000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00014000 -> 0x00015000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes) [ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Memory: 11952k/16384k available (2467k kernel code, 4432k reserved, 365k data, 172k init, 0k highmem) [ 0.000000] NR_IRQS:256 [ 0.000000] Calibrating delay loop... 148.88 BogoMIPS (lpj=744448) [ 0.070000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.140000] bio: create slab <bio-0> at 0 [ 0.160000] Switching to clocksource MIPS [ 0.170000] NET: Registered protocol family 2 [ 0.180000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.190000] TCP established hash table entries: 512 (order: 0, 4096 bytes) [ 0.200000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) [ 0.200000] TCP: Hash tables configured (established 512 bind 512) [ 0.210000] TCP reno registered [ 0.210000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] NET: Registered protocol family 1 [ 0.300000] unable to register fixed phy for cpmac-high: 0 [ 0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.320000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.340000] msgmni has been set to 23 [ 0.340000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.350000] io scheduler noop registered [ 0.350000] io scheduler deadline registered (default) [ 0.360000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.370000] serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7 [ 0.380000] console [ttyS0] enabled, bootconsole disabled [ 0.380000] console [ttyS0] enabled, bootconsole disabled [ 0.390000] serial8250: ttyS1 at MMIO 0x8610f00 (irq = 16) is a TI-AR7 [ 0.430000] physmap platform flash device: 02000000 at 10000000 [ 0.440000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 0.450000] Amd/Fujitsu Extended Query Table at 0x0040 [ 0.460000] Amd/Fujitsu Extended Query version 1.3. [ 0.460000] number of CFI chips: 1 [ 0.470000] titan: BOOTCFG variable not found. [ 0.490000] Fixed MDIO Bus: probed [ 6.670000] INTERNAL PHY!!! [ 6.730000] cpmac-mii: probed [ 6.810000] cpmac: device eth0 (regs: 08640800, irq: 41, phy: cpmac-1:1f, mac: 00:1a:70:80:12:4f) [ 6.890000] cpmac: device eth1 (regs: 08640000, irq: 27, phy: cpmac-1:1e, mac: 00:1a:70:80:12:4e) [ 6.910000] vlynq0: regs 0x08611c00, irq 33, mem 0x0c000000 [ 7.820000] vlynq1: regs 0x08611300, irq 34, mem 0x40000000 [ 8.730000] TCP cubic registered [ 8.730000] NET: Registered protocol family 17 [ 8.740000] Bridge firewalling registered [ 8.740000] 8021q: 802.1Q VLAN Support v1.8 [ 8.750000] VFS: Cannot open root device "(null)" or unknown-block(0,0) [ 8.760000] Please append a correct "root=" boot option; here are the available partitions: [ 8.770000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 8.780000] Rebooting in 3 seconds..

tried every possible setting (setenv and boot root=) think there is an error in MTD driver for 1050. used to work some time ago in image where eth1 didnt work or I just do not get what settings are right


#12459 [packages] xorg/libs/fltk2 build is broken packages Barrier Breaker 14.07 defect 2012-11-11

The build is broken for this package!!

Buildlog:

Installing static images library in /usr/lib
mkdir -p /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib
rm -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_images.a
cp ../lib/libfltk2_images.a /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib
mips-openwrt-linux-uclibc-ranlib /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_images.a
rm -f -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_z.a
rm -f -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_png.a
rm -f -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_jpeg.a
echo "Installing shared images library in /usr/lib"
Installing shared images library in /usr/lib
mkdir -p /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib
rm -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_images.so.2.0
rm -f /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_images.so
cp ../lib/libfltk2_images.so.2.0 /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib
ln -s -s libfltk2_images.so.2.0 /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/libfltk2_images.so
make[4]: Leaving directory `/home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg/fltk2-r9714/images'
=== installing documentation ===
make[4]: Entering directory `/home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg/fltk2-r9714/documentation'
echo "Installing man pages in /usr/man"
Installing man pages in /usr/man
mkdir -p -p /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/man/man1
for file in ; do \
                cp $file /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/man/man1/`basename $file .man`.1; \
        done
mkdir -p -p /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/man/man3
for file in ; do \
                cp $file /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/man/man3/`basename $file .man`.3; \
        done
make[4]: Leaving directory `/home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg/fltk2-r9714/documentation'
make[3]: Leaving directory `/home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg/fltk2-r9714'
touch /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//.built
mkdir -p /home/openwrt/openwrt/wndr3700/bin/ar71xx/packages /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-ar71xx/fltk2/CONTROL /home/openwrt/openwrt/wndr3700/staging_dir/target-mips_r2_uClibc-0.9.33.2/pkginfo
install -d -m0755 /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-ar71xx/fltk2/usr/lib
cp -fpR /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-install/usr/lib/*.so* /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-ar71xx/fltk2/usr/lib/
find /home/openwrt/openwrt/wndr3700/build_dir/target-mips_r2_uClibc-0.9.33.2/Xorg//fltk2-r9714//ipkg-ar71xx/fltk2 -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf
Package fltk2 is missing dependencies for the following libraries:
libXft.so.2
libpthread.so.0
make[2]: *** [/home/openwrt/openwrt/wndr3700/bin/ar71xx/packages/fltk2_r9714-2_ar71xx.ipk] Error 1
make[2]: Leaving directory `/home/openwrt/openwrt/wndr3700/feeds/xorg/lib/fltk2'
make[1]: *** [package/feeds/xorg/fltk2/compile] Error 2
make[1]: Leaving directory `/home/openwrt/openwrt/wndr3700'
make: *** [package/fltk2/compile] Error 2
openwrt@h2061450:~/openwrt/wndr3700$

#14977 Usb2 not work correctly on mcs814x platform kernel Barrier Breaker 14.07 defect 2014-02-12

I have compiled r39211 for a devolo usb extender. If i connect a UVC usb camera i recive this error

uvcvideo: Failed to set UVC probe control : -110 (exp. 26).

Then the /dev/video0 is not created. If i remove the kmod-usb2_3.3.8-1_mcs814x and i use only kmod-usb-ohci it works.

BusyBox v1.19.4 (2014-01-29 17:40:01 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r39211)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:~# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.3.8 (ramponis@ramponis-desktop) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39211) ) #3 Mon Feb 3 12:52:28 CET 2014
[    0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Moschip MCS8140 board, model: Devolo dLAN USB Extender
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 4096
[    0.000000] free_area_init_node: node 0, pgdat c0280380, node_mem_map c02aa000
[    0.000000]   Normal zone: 32 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 4064 pages, LIFO batch:0
[    0.000000] CPU frequency: 175000 (kHz)
[    0.000000] SDRAM frequency: 100 (MHz)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
[    0.000000] Kernel command line: earlyprintk mem=16M console=ttyS0,57600
[    0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[    0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Memory: 16MB = 16MB total
[    0.000000] Memory: 13460k/13460k available, 2924k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc1800000 - 0xff000000   ( 984 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc1000000   (  16 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0258000   (2368 kB)
[    0.000000]       .init : 0xc0258000 - 0xc0270000   (  96 kB)
[    0.000000]       .data : 0xc0270000 - 0xc02812a0   (  69 kB)
[    0.000000]        .bss : 0xc02812c4 - 0xc02a9ad4   ( 163 kB)
[    0.000000] NR_IRQS:32
[    0.000000] Timer frequency: 50000 (kHz)
[    0.000000] Calibrating delay loop... 86.93 BogoMIPS (lpj=434688)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.090000] Mount-cache hash table entries: 512
[    0.090000] CPU: Testing write buffer coherency: ok
[    0.090000] Setting up static identity map for 0x1d4a20 - 0x1d4a5c
[    0.100000] NET: Registered protocol family 16
[    0.120000] gpiochip_add: registered GPIOs 236 to 255 on device: 400d0000.gpio
[    0.130000] gpiochip_add: registered GPIOs 232 to 235 on device: 400d4000.gpio
[    0.150000] CPU mode: External MII
[    0.190000] bio: create slab <bio-0> at 0
[    0.220000] NET: Registered protocol family 2
[    0.220000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.220000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.220000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.230000] TCP: Hash tables configured (established 512 bind 512)
[    0.230000] TCP reno registered
[    0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] NET: Registered protocol family 1
[    0.240000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.240000] JFFS2 version 2.2 (NAND) (ZLIB) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.240000] msgmni has been set to 26
[    0.250000] io scheduler noop registered
[    0.250000] io scheduler deadline registered (default)
[    0.250000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.260000] 400dc000.serial: ttyS0 at MMIO 0x400dc000 (irq = 21) is a 16550
[    0.270000] console [ttyS0] enabled
[    0.280000] mcs814x-rng 4009c000.rng: registered
[    0.300000] 1c000000.flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000c9
[    0.310000] 1c000000.flash: Found an alias at 0x800000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x1000000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x1800000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x2000000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x2800000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x3000000 for the chip at 0x0
[    0.310000] 1c000000.flash: Found an alias at 0x3800000 for the chip at 0x0
[    0.310000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.320000]   Amd/Fujitsu Extended Query version 1.1.
[    0.330000] 1c000000.flash: Swapping erase regions for top-boot CFI table.
[    0.340000] number of CFI chips: 1
[    0.350000] 6 ofpart partitions found on MTD device 1c000000.flash
[    0.360000] Creating 6 MTD partitions on "1c000000.flash":
[    0.370000] 0x000000000000-0x000000030000 : "ArmBoot"
[    0.390000] 0x000000030000-0x000000040000 : "Config1"
[    0.410000] 0x000000040000-0x000000050000 : "Config2"
[    0.430000] 0x000000050000-0x000000150000 : "kernel"
[    0.450000] 0x000000150000-0x000000510000 : "rootfs"
[    0.470000] mtd: partition "rootfs" set to be root filesystem
[    0.480000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=170000
[    0.490000] 0x0000003a0000-0x000000510000 : "rootfs_data"
[    0.500000] 0x000000050000-0x000000510000 : "linux"
[    0.530000] nuport-mac-mii: probed
[    0.540000] nuport-mac 40084000.ethernet: attached PHY driver [Generic PHY] (mii_bus:phy_addr=8)
[    0.550000] nuport-mac 40084000.ethernet: registered (MAC: 00:0b:3b:00:00:01)
[    0.570000] Registered led device: dlan-usb-extender:green:usb
[    0.570000] TCP cubic registered
[    0.580000] NET: Registered protocol family 17
[    0.590000] NET: Registered protocol family 15
[    0.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    0.640000] Freeing init memory: 96K
[    8.190000] usbcore: registered new interface driver usbfs
[    8.210000] usbcore: registered new interface driver hub
[    8.220000] usbcore: registered new device driver usb
[    8.260000] SCSI subsystem initialized
[    8.300000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.310000] mcs814x-ohci 400fd000.ohci: MCS814X OHCI
[    8.320000] mcs814x-ohci 400fd000.ohci: new USB bus registered, assigned bus number 1
[    8.330000] mcs814x-ohci 400fd000.ohci: irq 11, io mem 0x400fd000
[    8.410000] hub 1-0:1.0: USB hub found
[    8.410000] hub 1-0:1.0: 2 ports detected
[    8.420000] mcs814x-ohci 400fe000.ohci: MCS814X OHCI
[    8.430000] mcs814x-ohci 400fe000.ohci: new USB bus registered, assigned bus number 2
[    8.440000] mcs814x-ohci 400fe000.ohci: irq 12, io mem 0x400fe000
[    8.520000] hub 2-0:1.0: USB hub found
[    8.520000] hub 2-0:1.0: 2 ports detected
[    8.760000] usb 1-1: new full-speed USB device number 2 using mcs814x-ohci
[   11.720000] JFFS2 notice: (208) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 28 of xref (0 dead, 21 orphan) found.
[   21.790000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   21.800000] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   21.810000] mcs814x-ehci 400fc000.ehci: MCS814X EHCI Host Controller
[   21.820000] mcs814x-ehci 400fc000.ehci: new USB bus registered, assigned bus number 3
[   21.840000] usb 1-1: USB disconnect, device number 2
[   21.900000] mcs814x-ehci 400fc000.ehci: irq 2, io mem 0x400fc000
[   21.930000] mcs814x-ehci 400fc000.ehci: USB 0.0 started, EHCI 1.00
[   21.950000] hub 3-0:1.0: USB hub found
[   21.960000] hub 3-0:1.0: 4 ports detected
[   21.970000] mcs814x-ehci 400fc000.ehci: added MCS814X EHCI driver
[   22.020000] mcs814x-wdt 400f8014.watchdog: registered
[   22.090000] Linux video capture interface: v2.00
[   22.210000] nf_conntrack version 0.5.0 (211 buckets, 844 max)
[   22.270000] usbcore: registered new interface driver usbserial
[   22.290000] usb 3-1: new high-speed USB device number 2 using mcs814x-ehci
[   22.300000] USB Serial support registered for generic
[   22.620000] usbcore: registered new interface driver usbserial_generic
[   22.630000] usbserial: USB Serial Driver core
[   22.700000] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam VX-5500 (045e:072d)
[   27.730000] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
[   32.750000] uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
[   32.760000] uvcvideo: Failed to initialize the device (-5).
[   32.770000] usbcore: registered new interface driver uvcvideo
[   32.780000] USB Video Class driver (1.1.1)
[   32.860000] xt_time: kernel timezone is -0000
[   32.900000] USB Serial support registered for FTDI USB Serial Device
[   32.920000] usbcore: registered new interface driver ftdi_sio
[   32.930000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   32.950000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.180000] eth0: link UP - 0/half
[   55.820000] Trying 100/FULL
[   56.830000] eth0: link UP - 100/full
root@OpenWrt:~#

I have also tested a usb storage.

If i try to copy through vsftpd i receive the followinf error:

[  377.170000] usb 1-1: reset high-speed USB device number 2 using mcs814x-ehci
[  378.040000] usb 1-1: reset high-speed USB device number 2 using mcs814x-ehci
[  435.350000] usb 1-1: reset high-speed USB device number 2 using mcs814x-ehci
[  489.160000] usb 1-1: reset high-speed USB device number 2 using mcs814x-ehci

#20042 WRTU54G-TM bricked by Chaos Calmer 15.05 RC2 packages Chaos Calmer 15.05 defect 2015-07-05

I downloaded the latest release candidate image here:

https://downloads.openwrt.org/chaos_calmer/15.05-rc2/adm8668/generic/openwrt-15.05-rc2-adm8668-squashfs.bin

I renamed it to "WRTU54G-TM_v1.00.26.bin" and loaded it using the Linksys firmware update web GUI.

The router no longer functions.


#12403 Toolchain build error with eglibc 2.16 (source: 34055) toolchain Chaos Calmer 15.05 defect 2012-11-01
make[6]: *** No rule to make target `/home/janos666/openwrt/trunk/build_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/eglibc-2.16-r21110-final/elf/xmalloc.o', needed by `lib-noranlib'.  Stop.
make[6]: Leaving directory `/home/janos666/openwrt/trunk/build_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/eglibc-2.16-r21110/libc/elf'
make[5]: *** [elf/subdir_lib] Error 2
make[5]: Leaving directory `/home/janos666/openwrt/trunk/build_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/eglibc-2.16-r21110/libc'
make[4]: *** [all] Error 2
make[4]: Leaving directory `/home/janos666/openwrt/trunk/build_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/eglibc-2.16-r21110-final'
make[3]: *** [/home/janos666/openwrt/trunk/build_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/eglibc-2.16-r21110-final/.built] Error 2
make[3]: Leaving directory `/home/janos666/openwrt/trunk/toolchain/eglibc'
make[2]: *** [toolchain/eglibc/compile] Error 2
make[2]: Leaving directory `/home/janos666/openwrt/trunk'
make[1]: *** [/home/janos666/openwrt/trunk/staging_dir/toolchain-mips_gcc-4.7-linaro_eglibc-2.16/stamp/.toolchain_install] Error 2
make[1]: Leaving directory `/home/janos666/openwrt/trunk'
make: *** [world] Error 2

Any ideas?


#12383 S100 Subtarget base system Barrier Breaker 14.07 enhancement 2012-10-27

Please readd S100 Subtarget from https://dev.openwrt.org/changeset/9459


hauke (12 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#12774 downloading a lot of data from the KVM virtual machine produce a kernel bug (3.6.11/brcm47xx) kernel Chaos Calmer 15.05 defect 2013-01-10

I use Barrier Breaker r35047 on asus wl-500gP v1.

the bug appeared in the following situation (reproduced several time)

1) i use 64-bit debian testing with kernel from debian experimental (linux-3.7.1)

   kl@weasel:~$ uname -a
   Linux weasel 3.7-trunk-amd64 #1 SMP Debian 3.7.1-1~experimental.2 x86_64 GNU/Linux

2) i start KVM virtual machine (qemu-kvm=1.1.2+dfsg-3) with another debian testing

working in it.

   sudo kvm -hda /dev/sdc -m 1024 -localtime

linux-3.6.9 were used under emulation.

3) under virtual machine i start OS update

   aptitude update
   aptitude dist-upgrade

the following debian mirror were used http://ftp.fi.debian.org/debian/ and it tries to download about 100Mb of data from it.

4) several seconds later the router goes to reboot

I repeat step 3 several time with the same result.

WARNING: The bug is not reproduced outside the virtual machine

[ 2729.852000] CPU 0 Unable to handle kernel paging request at virtual address 00000008, epc == 80133a80, ra == 801356ac
[ 2729.852000] Oops[#1]:
[ 2729.852000] Cpu 0
[ 2729.852000] $ 0   : 00000000 10005800 00000000 80e35a48
[ 2729.852000] $ 4   : 802f4750 802f3c2c 00000000 00000aa9
[ 2729.852000] $ 8   : 00000aa9 33058600 003d0900 00000000
[ 2729.852000] $12   : 00003147 00000000 00000000 00000000
[ 2729.852000] $16   : 80e35a48 00000000 802f4750 802f3c2c
[ 2729.852000] $20   : fffffffe 00000aa9 fffffffc 32c8b1cb
[ 2729.852000] $24   : 00000019 80043cdc                  
[ 2729.852000] $28   : 81822000 81823b30 00000003 801356ac
[ 2729.852000] Hi    : 00000000
[ 2729.852000] Lo    : 00003147
[ 2729.852000] epc   : 80133a80 rb_insert_color+0x38/0x17c
[ 2729.852000]     Tainted: G           O
[ 2729.852000] ra    : 801356ac timerqueue_add+0xc4/0x128
[ 2729.852000] Status: 10005802    KERNEL EXL 
[ 2729.852000] Cause : 00800008
[ 2729.852000] BadVA : 00000008
[ 2729.852000] PrId  : 00029006 (Broadcom BMIPS3300)
[ 2729.852000] Modules linked in: nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_na)
[ 2729.852000] Process ksoftirqd/0 (pid: 3, threadinfo=81822000, task=81817028, tls=00000000)
[ 2729.852000] Stack : 81823cc0 8004d7b4 00000001 801355c0 802f4750 80e35a4c 802f3c2c ffffffff
        32c8b1cb 00000aa9 00000000 801356ac 81a91800 802f4750 802f3c20 7fffffff
        ffffffff 802f4750 802f3c20 7fffffff ffffffff 8003b4f4 802f0000 802f0000
        00000000 0000003f 802f0000 802f3c50 802f0000 8003be08 81b27520 802efdf0
        00000004 00000000 00000001 00000004 32c8b1cb 00000aa9 00000aa9 32c8b1cb
        ...
[ 2729.852000] Call Trace:
[ 2729.852000] [<80133a80>] rb_insert_color+0x38/0x17c
[ 2729.852000] [<801356ac>] timerqueue_add+0xc4/0x128
[ 2729.852000] [<8003b4f4>] __run_hrtimer.isra.22+0x7c/0xfc
[ 2729.852000] [<8003be08>] hrtimer_interrupt+0x1a8/0x3f4
[ 2729.852000] [<8000cd10>] c0_compare_interrupt+0x74/0x98
[ 2729.852000] [<80057204>] handle_irq_event_percpu+0x60/0x360
[ 2729.852000] [<8005ac44>] handle_percpu_irq+0x54/0x88
[ 2729.852000] [<80056a5c>] generic_handle_irq+0x3c/0x4c
[ 2729.852000] [<800074d0>] do_IRQ+0x1c/0x2c
[ 2729.852000] [<80001df0>] plat_irq_dispatch+0x40/0xc0
[ 2729.852000] [<800058a4>] ret_from_irq+0x0/0x4
[ 2729.852000] [<801399e8>] __copy_user_common+0x240/0x2b8
[ 2729.852000] [<801c1b44>] skb_copy_ubufs+0xec/0x1e4
[ 2729.852000] [<801cbe4c>] __netif_receive_skb+0x87c/0x994
[ 2729.852000] [<81b1c60c>] 0x81b1c60c
[ 2729.852000] 
[ 2729.852000] 
Code: 2416fffc  0804cedb  2414fffe <8e220008> 1602001a  00000000  8e220004  10400005  00000000 
[ 2729.852000] ---[ end trace 923a15b4b773a208 ]---
[ 2729.852000] Kernel panic - not syncing: Fatal exception in interrupt
[ 2729.852000] Rebooting in 3 seconds..


#19767 Image to big error on brcm47xx (for 8 and 16MB devices) base system Chaos Calmer 15.05 defect 2015-05-30

On actual Trunk most images are to big finaly. When trying to pack the uncompressed image OR build an Image bigger then 8 MB no image is generated.

I tryed to build an image for an E3200, which has 16 MB Flash, but an image with just 10MB is not build.

Same Problems with an Image of 7.2MB in size for an E3000. The usual .bin and .trx file was build, the last image, which contains the "uncompressed image" gives an "to big" error.

At the moment the maximum image size for brcm47xx is 7.2MB. No matter how big the flash in the router really is.

The Hardlimit of an 8MB Flash makes so no sence for router with bigger flashes!


#11091 Router reboot on high download traffic. base system Barrier Breaker 14.07 defect 2012-03-07

I am on Backfire (10.03.1, r29592), the hardware is an Asus 500gP v1.0 router.

On the brcm47xx, kernel 2.6, whenever I download at high speeds(around and over 5MB/s) the CPU load is very high and eventually it reboots, probably because of a kernel panic. I used to think the b43 driver was the cause as it showed up in top as using a lot of CPU but even if wifi down I get crashes.

My kernel version is:

Linux OpenWrt 2.6.32.27 #5 Wed Dec 21 05:56:26 CET 2011 mips GNU/Linux

As the router crashes, I don't know how to get a dmesg dump.


#11120 WLAN led is becoming disabled on D-Link DIR-320 after applying backfire r30752 packages Chaos Calmer 15.05 defect 2012-03-12

WLAN led is becoming disabled on D-Link DIR-320 after applying backfire r30752 (for broadcom 5354). Possibly, additions 'set &= 0xff02;' masks wlan led control? Thanks and regards, George Ivanov


#11941 (BCM947xx) kernel panic under high network load kernel Barrier Breaker 14.07 defect 2012-07-30

I'm experiencing extremely unstable work both on trunk and backfire versions under high network load (wan->lan). Also, networking speed is poor compared to 2.4 kernel. I think a problem can be related to high cpu usage and as a consequence high temperature of the processor; also router gets comletely unresponsible under load even on serial console.


#12461 brcm47xx / ifconfig / page allocation failure base system Chaos Calmer 15.05 defect 2012-11-12

This affect for us "Linksys WRT54G/GS/GL" and "Buffalo WHR-HP-G54". Trying several revision of trunk including r33556 and r34054 we have very often an

ifconfig: page allocation failure: order:0, mode:0x20"

during boot time. sometimes the devices are even hanging after this, although we have applied a special tweak in kernel-commandline:

root@box:~ cat /proc/cmdline 
 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 oops=panic panic=10

we "solved" the problem by patching away all the ifconfig calls during preinit:

for FILE in /lib/preinit/*; do
  fgrep -q "ifconfig" "$FILE" && {
    fgrep -q "#ifconfig" "$FILE" || {
      sed -i 's/ifconfig/:;#ifconfig/g' "$FILE"
    }
  }
} done

and yes, we really should convert all ifconfig-calls to netifd-calls. (preinit and /lib/wifi contains some calls to ifconfig)

http://intercity-vpn.de/files/dmesg.boot.brcm47xx.ifconfig.page_allocation_failure-r33556.txt

[   73.312000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   73.340000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   73.740000] nf_conntrack version 0.5.0 (203 buckets, 812 max)
[   74.476000] xt_time: kernel timezone is -0000
[   81.868000] ifconfig: page allocation failure: order:0, mode:0x20
[   81.868000] Call Trace:
[   81.868000] [<80254b3c>] dump_stack+0x8/0x34
[   81.868000] [<8005fb18>] warn_alloc_failed+0xf0/0x114
[   81.868000] [<800623a8>] __alloc_pages_nodemask+0x5b0/0x610
[   81.868000] [<80255f90>] cache_alloc_refill+0x2c4/0x758
[   81.868000] [<80091224>] __kmalloc+0xac/0x128
[   81.868000] [<801ba568>] __alloc_skb+0x74/0x138
[   81.868000] [<801bab88>] __netdev_alloc_skb+0x24/0x58
[   81.868000] [<801977f0>] b44_alloc_rx_skb+0x50/0x3ac
[   81.868000] [<80197c34>] b44_init_rings+0xe8/0x114
[   81.868000] [<8019b960>] b44_open+0x34c/0x67c
[   81.868000] [<801c8420>] __dev_open+0x144/0x21c
[   81.868000] [<801c8750>] __dev_change_flags+0xc0/0x160
[   81.868000] [<801c8898>] dev_change_flags+0x20/0x6c
[   81.868000] [<8021f718>] devinet_ioctl+0x2ac/0x7f4
[   81.868000] [<801b02c4>] sock_ioctl+0x294/0x2f4
[   81.868000] [<800a5620>] do_vfs_ioctl+0x5a4/0x5f8
[   81.868000] [<800a56c4>] sys_ioctl+0x50/0x8c
[   81.868000] [<8000e330>] stack_done+0x20/0x40
[   81.868000] 
[   81.868000] Mem-Info:
[   81.868000] Normal per-cpu:
[   81.868000] CPU    0: hi:    0, btch:   1 usd:   0
[   81.868000] active_anon:314 inactive_anon:8 isolated_anon:0
[   81.868000]  active_file:633 inactive_file:553 isolated_file:0
[   81.868000]  unevictable:0 dirty:0 writeback:0 unstable:0
[   81.868000]  free:48 slab_reclaimable:182 slab_unreclaimable:809
[   81.868000]  mapped:172 shmem:10 pagetables:52 bounce:0
[   81.868000] Normal free:192kB min:508kB low:632kB high:760kB active_anon:1256kB inactive_anon:32kB active_file:2532kB inactive_file:2212kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:16256kB mlocked:0kB dirty:0kB writeback:0kB mapped:688kB shmem:40kB slab_reclaimable:728kB slab_unreclaimable:3236kB kernel_stack:288kB pagetables:208kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[   81.868000] lowmem_reserve[]: 0 0
[   81.868000] Normal: 0*4kB 0*8kB 0*16kB 0*32kB 1*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 192kB
[   81.868000] 1196 total pagecache pages
[   81.868000] 0 pages in swap cache
[   81.868000] Swap cache stats: add 0, delete 0, find 0/0
[   81.868000] Free swap  = 0kB
[   81.868000] Total swap = 0kB
[   81.868000] 4096 pages RAM
[   81.868000] 845 pages reserved
[   81.868000] 1382 pages shared
[   81.868000] 2607 pages non-shared
[   82.092000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[   82.100000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[   82.692000] b44 ssb0:0: eth0: powering down PHY
[   82.724000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[   82.732000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[   89.612000] cfg80211: Calling CRDA for country: US

#13393 Running 'wifi' does not disable interfaces marked as disabled on broadcom-wl devices packages Chaos Calmer 15.05 defect 2013-04-20

Instead of being able to simply re-run wifi to reconfigure wireless compeletely, this means I have to run 'wifi down' followed by 'wifi' to ensure the config is reloaded.


#13441 nvram on flash (E4200) kernel Chaos Calmer 15.05 defect 2013-04-29

[ 0.000000] nvram on flash (38784 bytes) is bigger than the reserved space in memory, will just copy the first 32768 bytes

For Linksys E4200 should be reseved 60KB for nvram, but only 32KB allocated.


#15058 b44 / b53 Driver issue on Belkin F5D8230 router base system Chaos Calmer 15.05 defect 2014-02-20

Running Barrier Breaker, I am getting a stack traced on the b44 driver

b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0 [ 5.660000] ------------[ cut here ]------------ [ 5.670000] WARNING: at drivers/net/phy/b53/b53_mdio.c:69 b53_mdio_op+0xf0/0xf8() [ 5.680000] Modules linked in: b44(+) [ 5.680000] CPU: 0 PID: 149 Comm: kmodloader Not tainted 3.10.28 #1 [ 5.690000] Stack : 00000006 00000000 00000000 00000000 00000000 00000000 8033d18e 00000037 [ 5.690000] 80921290 8027616c 8031d104 802c525b 00000095 00000030 8087bd80 00000000 [ 5.690000] 80c4c204 8002672c 00000003 8002406c 00000000 00000000 802784e0 80c61894 [ 5.690000] 80c61800 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 5.690000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 80c61820 [ 5.690000] ... [ 5.720000] Call Trace: [ 5.720000] [<80010dd4>] show_stack+0x48/0x70 [ 5.730000] [<80024168>] warn_slowpath_common+0x78/0xa8 [ 5.730000] [<800241b0>] warn_slowpath_null+0x18/0x24 [ 5.740000] [<80193cf8>] b53_mdio_op+0xf0/0xf8 [ 5.740000] [<80194224>] b53_mdio_read8+0x2c/0x64 [ 5.750000] [<801920f4>] b53_switch_detect+0x40/0x22c [ 5.750000] [<80193bc4>] b53_phy_probe+0x64/0xa8 [ 5.760000] [<8018dbb4>] phy_probe+0x7c/0xa8 [ 5.760000] [<8016515c>] driver_probe_device+0xd0/0x1f4 [ 5.770000] [<80163690>] bus_for_each_drv+0x5c/0xac [ 5.770000] [<8016504c>] device_attach+0x78/0xa0 [ 5.780000] [<801644f0>] bus_probe_device+0x3c/0xcc [ 5.780000] [<80162978>] device_add+0x3f8/0x568 [ 5.790000] [<8018e98c>] phy_device_register+0x44/0x8c [ 5.790000] [<8018eee0>] mdiobus_scan+0xb8/0xe8 [ 5.800000] [<8018f0cc>] mdiobus_register+0x11c/0x1c0 [ 5.800000] [<80ee2a24>] 0x80ee2a24 [ 5.810000] [ 5.810000] ---[ end trace 62d2a2b23d969f94 ]--- [ 5.810000] Broadcom B53 (3): probe of 1:00 failed with error -5 [ 5.820000] libphy: b44_eth_mii: probed [ 5.820000] b44 ssb0:0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1:00) [ 5.830000] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:90:96:00:00:00 [ 5.850000] libphy: b44_eth_mii: probed [ 5.860000] adm6996: adm6996_gpio: ADM6996L model PHY found. [ 5.850000] b44 ssb0:1: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2:05) [ 5.860000] b44 ssb0:1 eth1: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:90:96:00:00:01 [ 6.700000] b44 ssb0:0 eth0: Link is up at 100 Mbps, half duplex [ 6.710000] b44 ssb0:0 eth0: Flow control is off for TX and off for RX [ 11.650000] b44 ssb0:0 eth0: powering down PHY

For some reason on the BCM5325A2KQM chipset b44 probing is finding the eth0 at phyaddr of 0 and not 30 as in the default of this device.


#19601 Asus RT-N18U broken FTDI base system Chaos Calmer 15.05 defect 2015-05-05

I have several FTDI modems that work OK with Linux computers and older routers like Asus RT-N16 and TP-Link WDR4300, but nothing happens when I plug any of them into Asus RT-N18U. These modems are based on Telit (GL868-DUAL). That's how such modem looks while plugged into Ubuntu computer:

[ 8766.698948] usb 1-1.4: new full-speed USB device number 11 using ehci-pci
[ 8766.797934] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001
[ 8766.797938] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8766.797940] usb 1-1.4: Product: Teleofis RX101-R4
[ 8766.797941] usb 1-1.4: Manufacturer: FTDI
[ 8766.797942] usb 1-1.4: SerialNumber: RXY3PJ3B
[ 8766.800622] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 8766.800651] usb 1-1.4: Detected FT232RL
[ 8766.800653] usb 1-1.4: Number of endpoints 2
[ 8766.800654] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 8766.800656] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 8766.800657] usb 1-1.4: Setting MaxPacketSize 64
[ 8766.801027] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0

And that's how it looks on serial console in Asus RT-N16:

[   55.650000] usb 2-2: new full-speed USB device number 2 using ohci-platform
[   55.890000] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
[   55.900000] usb 2-2: Detected FT232RL
[   55.900000] usb 2-2: Number of endpoints 2
[   55.900000] usb 2-2: Endpoint 1 MaxPacketSize 64
[   55.910000] usb 2-2: Endpoint 2 MaxPacketSize 64
[   55.910000] usb 2-2: Setting MaxPacketSize 64
[   55.930000] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0

But nothing happens when I plug it into Asus RT-N18U. No messages, nothing. And it's strange that both TX and RX leds on the modem are lit while plugged into N18U (usually they are dark and blink briefly during data exchange). Modem finds GSM network as usual and I can call it via another modem (CSD call), but no exchange happens between modem and router. Drivers seems to be loaded:

root@OpenWrt:/# lsmod|grep ftdi
ftdi_sio               28341  0
usbcore               112147 24 ftdi_sio
usbserial              17672  1 ftdi_sio
root@OpenWrt:/# dmesg|grep -i ftdi
[   17.827806] usbcore: registered new interface driver ftdi_sio
[   17.833684] usbserial: USB Serial support registered for FTDI USB Serial Device

I tried both self-compiled trunk (right now it's r45610) and prebuilt images during last month, also I tried to include/exclude usb2 and usb3 support, nothing works.


#20280 The Linksys EA6300v1/EA6400 kernel defect 2015-08-04

I've added preliminary support for the Linksys EA6300v1/EA6400. The power LED and the WPS button aren't configured yet, but the RAM is correctly configured and the 2.4GHz wireless works mostly.

There are problems. This router has partitions in its flash memory for a main image and a backup image. This is the default partition table:

00000000: boot 00080000: nvram 00180000: devinfo 00200000: firmware

00200000: header 0020001c: kernel 00436430: / squashfs

01f00000: firmware2

01f00000: header 01f0001c: kernel 020d364c: / squashfs

03c00000: /var/config jffs2 08000000: END OF MEMORY

On the first flash, openwrt accidentally ignores its root filesystem and instead mounts the root filesystem of the backup image on /, effectively forcing the Linksys userspace to use the OpenWRT kernel. That only lasts one boot though. OpenWRT erases everything after 0x01f00000 during the first boot, replacing it with the UBIFS overlay so on the next boot, openwrt's kernel does manage to find its root filesystem. Nothing happened this time, but running the Linksys userspace with the openwrt kernel is dangerous and shouldn't even happen once.

Also, I'm pretty sure the wireless b/g/n interface doesn't work in Managed mode. Master mode works fine, though. Any reason why that might be? Is it hardware or software? The hardware was only meant to work in Master mode, after all.

The files I used to build my image are attached.


#5124 ath5k-wgt634u , wireless led not work other Barrier Breaker 14.07 defect 2009-05-13

wgt634u with KAMIKAZE (8.09, r15827) and ath5k (ath5k phy0: Atheros AR5213A chip found)

wireless works, but the wireless led is always off


jow (17 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#9233 Chaingeset 26405 breaks compilation with ext toolchain into readonly directory. toolchain Barrier Breaker 14.07 defect 2011-04-13

Hi guys,

As subject, the Changeset 26405 breaks compilation when the external toolchain is into a read-only directory.

In my tree I created a STAGING_TOOLCHAIN_DIR with a writable path that is equal to TOOLCHAIN_DIR when a build-on-the-fly toolchain is used, or a subdirectory into staging_dir when a external toolchain is used. OF course, toolchain/Makefile should be modified.

Best regards,

luigi


#7066 [x86] luci-app-samba is not enabled by default packages Barrier Breaker 14.07 defect 2010-04-04

one has to call '/etc/init.d/samba enable' manually. And I'm missing 'enable' checkbox on the Network Shares page.

ps Please enable Mounting Points (fstab functionality) for the final release.


#9021 patch to uhttpd to enable -i.lua=internal:lua associations other Barrier Breaker 14.07 enhancement 2011-03-10

it is a tiny patch, but it allows me to create a tiny lua cms, set it as my lua_handler, then simply touch the .lua file in my web root.

of course a .lua could be a real .lua and the lua_handler could execute it too.

the particular advantage for me is specifying -Iindex.lua such that the default index reached on my router is my little lua page.

i'm using this on my router at http://kelly.foxmoxie.org/ without any issue so far.


#9321 nixio should link against libcrypto is using OpenSSL luci Barrier Breaker 14.07 defect 2011-04-28
# /www/cgi-bin/luci 

/usr/bin/lua: symbol 'SHA1_Init': can't resolve symbol in lib '/usr/lib/lua/nixio.so'.

/usr/bin/lua: symbol 'SHA1_Init': can't resolve symbol in lib '/usr/lib/lua/nixio.so'.
/usr/bin/lua: error loading module 'nixio' from file '/usr/lib/lua/nixio.so':
        (null)
stack traceback:
        [C]: ?
        [C]: in function 'require'
        /usr/lib/lua/nixio/fs.lua:16: in main chunk
        [C]: in function 'require'
        /usr/lib/lua/luci/ccache.lua:17: in main chunk
        [C]: in function 'require'
        /usr/lib/lua/luci/cacheloader.lua:17: in main chunk
        [C]: in function 'require'
        /www/cgi-bin/luci:2: in main chunk
        [C]: ?

SHA1_Init() is in libcrypto.

libs/nixio/Makefile:

ifeq ($(NIXIO_TLS),openssl)

  • NIXIO_LDFLAGS += -lssl

+ NIXIO_LDFLAGS += -lssl -lcrypto

endif


#10095 more usefull patches for ppp packages Barrier Breaker 14.07 enhancement 2011-09-13

I consider their useful, so added to my local build of ppp package (2.4.5-1 from trunk) and tested for a month on all my hosts with pppoe/pptp (mostly backfire).

500-git_terminate_correctly_lcp_lowerup.patch

pppd: Terminate correctly if lcp_lowerup delayed calling fsm_lowerup

Cameron Hutchison noticed that if pppd gets asked to terminate the
link in the period between when lcp_lowerup() is called and when
fsm_lowerup() is called from lcp_delayed_up() (i.e. when listen_time
is non-zero), pppd never exits.

The reason is that lcp_close() doesn't handle the delayed-up case
properly.  Since the FSM is still in STOPPED state, we don't call
lcp_finished() and therefore never exit the main event loop.

This fixes it by handling the delayed-up case in lcp_close() as if
we had done the lowerup but the OPT_SILENT bit was set.  We use the
silent case because we don't want to actually send a configure-request at this point.

510-git_fix_rp-pppoe_options_parsing.patch

rp_pppoe: Copy acName and pppd_pppoe_service after option parsing

At present, the access concentrator name (acName) and service name
(pppd_pppoe_service) are set by option parsing, but are used at the
point of PPPOEInitDevice(), which gets called when the ethernet
device name is seen.  So if the rp_pppoe_service or rp_pppoe_ac
options appear after the device name, they are ignored.

This fixes it by using acName and pppd_pppoe_service in
PPPOEConnectDevice, which gets called after all options have been
parsed.

520-rp-pppoe_plugin_3.10.patch
I backport changes from latest stable rp-pppoe to pppd's plugin. Includes such important changes:

  • Added proper timeout handling while waiting for PADO/PADS.
  • Fix race condition with some access concentrators that move very quickly into session mode (problem noted by Luigi Sgro)

530-debian_dont_exit_pado_timeout.patch

to prevent pppd persist from exiting in the event of a PPPoE PADO timeout.

540-debian_always_setsid.patch

always create a new process group.

550-debian_adaptive_echos.patch

support sending LCP echo requests only if the link is idle.

#10940 option to specify syslog level in luci base system Barrier Breaker 14.07 defect 2012-02-09

the attached patch implement the option to specify the syslog level in luci and to start syslogd with a log level like 'notice' instead of 'info'.

i noticed that applying the changes in luci does not restart syslogd as i expected. is this correct?


#11169 Real time traffic graphs missing for pppoatm interfaces packages Barrier Breaker 14.07 defect 2012-03-23

I have a recent build of Trunk on a Traverse Geos, with two PPPoATM interfaces (pppoa-ppp0 and pppoa-ppp1).

Those devices aren't listed in the Traffic tab at /admin/status/realtime/bandwidth/ though. But if I manually go to admin/status/realtime/bandwidth/pppoa-ppp0 I *do* get a graph. It seems to be only the index of available interfaces that's wrong.


#12307 Bug in Wireless Realtime Graphs luci Barrier Breaker 14.07 defect 2012-10-11

I have four wifi interface on one radio0 (TP-Link TL-WR1043ND). They look as wlan0, wlan0-1, wlan0-2, wlan0-3 in LuCi. I see it all in Realrime GraphsWireless , but graph works only in wlan0. Other screen is blank. I inspect not working screen in Opera and get many identical errors:

Uncaught exception: TypeError: Cannot convert 'data[data.length-1]' to object
Error thrown at line 217, column 6 in <anonymous function>(x, data) in http://192.168.0.1/cgi-bin/luci/;stok=9a7be0cac7e9479a21519c5470380da3/admin/status/realtime/wireless/wlan0-1:
    data_stamp = data[data.length-1][TIME];
called from line 72, column 4 in <anonymous function: xhr.onreadystatechange>() in http://192.168.0.1/luci-static/resources/xhr.js:
    callback(xhr, json);

#12449 Add hotplug events for ntp updates base system Chaos Calmer 15.05 enhancement 2012-11-09

Hello,

ntpd have the ability to call a script on three events: periodic, stratum and step. This would be useful for other services that need to be notified when the clock was updated, or just started after ntp set the system clock (i.e. aiccu, kerberos, winbind).

This is a simple patch that might need improvements. I don't know how much doc should I write inside the scripts as comments as disk is a limited resource. Also, there might be a better path for ntpd-hotplug script.

If accepted, I might add a section on hotplug wiki page

This is an example of a ntp hotplug script:

#!/bin/sh
#
# ACTION=(periodic stratum step)
#
case "$ACTION" in
stratum|step)
	/etc/init.d/myservice start
;;
esac

PS: I'm aware of most of aiccu discussion that resulted into the deletion of openwrt patch and scripts. I'm working on my "own-solution" for it but ntp hotplug is a general improvement and resource cheap.


#13854 dnsmasq: reverse DNS lookup broken for static host entries packages Chaos Calmer 15.05 defect 2013-07-10

introduced by https://dev.openwrt.org/changeset/36943 reverse lookup fails for static host entries (aka "domain" sections in /etc/config/dhcp)

generation of "--ptr-record" options got deleted by that patch, why?


#14281 Luci semantic error in description luci Chaos Calmer 15.05 defect 2013-10-06

Status>Routes tab has text 'The following rules are currently active on this system.'

this should be

'The following routes are currently active on this system:'


#17222 luci-app-minidlna can't display Minidlna Status luci Chaos Calmer 15.05 defect 2014-07-22

after minidlna updated to 1.1.3, minidlna status always displayed as: "The miniDLNA service is active, serving 0 audio, 0 video and 0 image files."

diff --git a/applications/luci-minidlna/luasrc/controller/minidlna.lua b/applications/luci-minidlna/luasrc/controller/minid
index 500c90a..486cd9e 100644
--- a/applications/luci-minidlna/luasrc/controller/minidlna.lua
+++ b/applications/luci-minidlna/luasrc/controller/minidlna.lua
@@ -44,9 +44,9 @@ function minidlna_status()
                if fd then
                        local html = fd:read("*a")
                        if html then
-                               status.audio = (tonumber(html:match("Audio files: (%d+)")) or 0)
-                               status.video = (tonumber(html:match("Video files: (%d+)")) or 0)
-                               status.image = (tonumber(html:match("Image files: (%d+)")) or 0)
+                               status.audio = (tonumber(html:match("<td>Audio files</td><td>(%d+)</td>")) or 0)
+                               status.video = (tonumber(html:match("<td>Video files</td><td>(%d+)</td>")) or 0)
+                               status.image = (tonumber(html:match("<td>Image files</td><td>(%d+)</td>")) or 0)
                        end
                        fd:close()
                end
(END)


#18716 Links in opkg.conf point to invalid URLs packages defect 2015-01-10

As of r43888:

root@OpenWrt:~# cat /etc/opkg.conf 
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz chaos_calmer_base http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/base
src/gz chaos_calmer_luci http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/luci
src/gz chaos_calmer_management http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/management
src/gz chaos_calmer_packages http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/packages
src/gz chaos_calmer_routing http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/routing
src/gz chaos_calmer_telephony http://downloads.openwrt.org/snapshots/trunk/ramips.rt305x/packages/telephony

But these URLs do not exist.

Doing this on the device fixes it:

sed -i -e 's/.rt305x//g' /etc/opkg.conf

Either the default opkg.conf or the URLs on downloads.openwrt.org need to be fixed.


#10939 add IPV6 to list of protocols / icmp6 type 'packet-too-big' to list of icmp types base system Barrier Breaker 14.07 enhancement 2012-02-09

although luci allows to enter 'IPV6' as protocol in the rule definition it would by nice to have 'IPV6' in the selection box, escpecially if openwrt is used for ipv6-tunnels. same is true for the icmp type 'packet-too-big' which is necessary for IPv6.


#12913 Add support to receive wpa_supplicant messages to LuCI luci Features Paradise enhancement 2013-01-28

In LuCI there is no way to associate to wireless networks with one time/dynamic passwords (password change every minute with two factor authentication). It is necessary to go to the command line and start up wpa_cli to receive the necessary password prompt.

It would be the required expertise to connect to a WPA2 Enterprise network if LuCI could interface with a wpa_cli daemon to prompt for OTP password (required when connecting to a PEAP-GTC)


#22027 Bug in openwrt wiki - oops - 404 website defect 2016-03-12

When you register and then login the first time you get forwarded to this page that is a 404 oops: https://wiki.openwrt.org/doc/howto/doku.php?id=start


#18057 NAT Loopback, NAT Reflection appears to be broken. base system defect 2014-10-08

In LuCI, if I create a wan forwarding rule from port 2222 to port 22 on any router interface, and I check NAT Loopback, the reflection rules are not created in iptables. This broke somewhere between r42475 and r42682. It is still broken in r42801.

/etc/config/firewall

config redirect
	option target 'DNAT'
	option src 'wan'
	option src_dport '2222'
	option dest_port '22'
	option name 'Remote Admin'
	option dest 'lan'
	option proto 'tcp'

Then after firewall (or entire router) restart

root@WNDR3800:~# iptables-save | grep 22
-A zone_wan_prerouting -p tcp -m tcp --dport 2222 -m comment --comment "Remote Admin" -j REDIRECT --to-ports 22


juhosg (20 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#7947 Routerstation Pro WLAN LED base system Chaos Calmer 15.05 enhancement 2010-09-15

Patch included.


#11754 Openwrt Giganet Ethernet packet size problem - Can not ping >1472 bytes packets kernel Barrier Breaker 14.07 defect 2012-06-26

I have installed and tested both trunk and branch versions of Openwrt for Atheros chipset. The Openwrt Atheros board has giganet ethernet and connects to CISCO Giganet Ethernet Switch (SG 200-0800). The problem is that I could not ping packet size > 1472 bytes:


root@Openwrt:~# ping -s 1472 10.50.0.1 PING 10.50.0.1 (10.50.0.1): 1472 data bytes 1480 bytes from 10.50.0.1: seq=0 ttl=64 time=1.547 ms 1480 bytes from 10.50.0.1: seq=1 ttl=64 time=1.375 ms C --- 10.50.0.1 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 1.375/1.461/1.547 ms root@Openwrt:~# ping -s 1473 10.50.0.1 PING 10.50.0.1 (10.50.0.1): 1473 data bytes C --- 10.50.0.1 ping statistics --- 2 packets transmitted, 0 packets received, 100% packet loss root@Openwrt:~# ping -s 1500 10.50.0.1 PING 10.50.0.1 (10.50.0.1): 1500 data bytes C


But if I change to Fast Ethernet (100 Mbps Ethernet), then I can ping with packet size >=1500 bytes.

I wonder if you could give me instructions whether I could solve this bug ?

Thanks in advance


#11759 JWAP003 does not find correct driver in boot packages Barrier Breaker 14.07 defect 2012-06-27

Firstly I have made changes in configuration. In arch/mips/ath79/mach-jwap003. removed ath79_eth0_data.has_ar8216 = 1; line. That occurs eth0 interface working ( start data traffic )

In drivers/net/ethernet/atheros/ag71xx/Kconfig added '
ATH79_MACH_JWAP004' to line end 'default y if ATH79_MACH_WNR2000 ATH79_MACH_MZK_W04NU'. That increase probability to find correct driver.

Now if device boot up there are four different kind of set up

[    3.160000] ag71xx_mdio: probed
[    3.160000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    3.490000] eth0: Atheros AR8216 switch driver attached.
[    3.590000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd042, driver=Atheros AR8216/AR8236/AR8316]
[    3.600000] eth1: Atheros AG71xx at 0xba000000, irq 5
[    3.930000] ag71xx ag71xx.1: eth1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd042, driver=Atheros AR8216/AR8236/AR8316]

In that case all interfaces work correctly (10Mbit & 100Mbit)

[    3.050000] ag71xx_mdio: probed
[    3.060000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    3.360000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd042, driver=Generic PHY]
[    3.380000] eth1: Atheros AG71xx at 0xba000000, irq 5
[    3.680000] ag71xx ag71xx.1: eth1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd042, driver=Generic PHY]

In this case only 100Mbit

[    3.160000] ag71xx_mdio: probed
[    3.160000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    3.470000] ag71xx ag71xx.0: eth0: could not connect to PHY at ag71xx-mdio.0:00
[    3.480000] eth0: Atheros AG71xx at 0xba000000, irq 5
[    3.780000] ag71xx ag71xx.1: eth0: could not connect to PHY at ag71xx-mdio.0:04

In that case no interfaces found

[    3.160000] ag71xx_mdio: probed
[    3.160000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    3.490000] eth0: Atheros AR8216 switch driver attached.
[    3.590000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd042, driver=Atheros AR8216/AR8236/AR8316]
[    3.680000] eth0: Atheros AG71xx at 0xba000000, irq 5
[    3.880000] ag71xx ag71xx.1: eth0: could not connect to PHY at ag71xx-mdio.0:04

In that case KERNEL PANIC

What should be done that device will be stabile and find correct driver for both 10 and 100Mbit?

another tickets https://dev.openwrt.org/ticket/11730 and https://dev.openwrt.org/ticket/11059 does not solve problem


#12338 AA - RW2458N boot error base system Barrier Breaker 14.07 defect 2012-10-18

AA 12.09beta

U-Boot 1.1.4.2 (Apr  1 2010 - 10:24:23)

Board: Ubiquiti Networks XM board (rev 0.0 e202)
DRAM:  32 MB
Flash:  8 MB
Net:   eth0, eth1
Hit any key to stop autoboot:  0 
## Booting image at 9f050000 ...
   Image Name:   MIPS OpenWrt Linux-3.3.8
   Created:      2012-09-03  17:57:07 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    950806 Bytes = 928.5 kB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Mon Sep 3 17:51:18 UTC 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7240 rev 2
[    0.000000] Clocks: CPU:390.000MHz, DDR:390.000MHz, AHB:195.000MHz, Ref:5.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=RW2458N console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6528k(rootfs),256k(cfg)ro,64k(EEPROM)ro,7552k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29136k/32768k available (2198k kernel code, 3632k reserved, 412k data, 208k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.080000] gpiochip_add: registered GPIOs 0 to 17 on device: ath79
[    0.090000] MIPS: machine is Redwave RW2458N
[    0.490000] registering PCI controller with io_map_base unset
[    1.500000] bio: create slab <bio-0> at 0
[    1.510000] PCI host bridge to bus 0000:00
[    1.510000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    1.520000] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.520000] pci 0000:00:00.0: fixup device configuration
[    1.530000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
[    1.530000] pci 0000:00:00.0: using irq 40 for pin 1
[    1.540000] Switching to clocksource MIPS
[    1.540000] NET: Registered protocol family 2
[    1.550000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.550000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.560000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.560000] TCP: Hash tables configured (established 1024 bind 1024)
[    1.570000] TCP reno registered
[    1.570000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.580000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.590000] NET: Registered protocol family 1
[    1.610000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.630000] msgmni has been set to 56
[    1.630000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.640000] io scheduler noop registered
[    1.640000] io scheduler deadline registered (default)
[    1.650000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    1.680000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    1.680000] console [ttyS0] enabled, bootconsole disabled
[    1.680000] console [ttyS0] enabled, bootconsole disabled
[    1.700000] m25p80 spi0.0: found m25p64, expected m25p80
[    1.710000] m25p80 spi0.0: m25p64 (8192 Kbytes)
[    1.710000] Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
[    1.740000] Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
[    1.780000] No RedBoot partition table detected in spi0.0
[    1.810000] ag71xx_mdio: probed
[    1.810000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    2.390000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
[    2.400000] eth1: Atheros AG71xx at 0xba000000, irq 5
[    2.970000] eth1: Found an AR7240/AR9330 built-in switch
[    4.000000] TCP cubic registered
[    4.000000] NET: Registered protocol family 17
[    4.000000] 8021q: 802.1Q VLAN Support v1.8
[    4.010000] VFS: Cannot open root device "(null)" or unknown-block(0,0)
[    4.020000] Please append a correct "root=" boot option; here are the available partitions:
[    4.020000] 1f00            8192 mtdblock0  (driver?)
[    4.030000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)


#12537 ramips: belkin f5d8235v2: network interfaces do not receive packets kernel Barrier Breaker 14.07 defect 2012-11-28

The network interfaces do not receive packets. The ifconfig command shows that no packet is received from any interface, so is it not possible to reach router using network. No, there is no firewall active on remote machine.

The trunk version was recompiled with the file trunk/target/linux/ramips/image/Makefile modified to include the correct kernel command line "console=ttyS1,57600n8" to be able to connect via rs-232, since the trunk version is bronken (Ticket #12533).

The follow capture was made using rs232 console.

U-Boot 1.1.3 (Nov  7 2008 - 00:24:27)

Board: Ralink APSoC DRAM:  32 MB
relocate_code Pointer at: 81fa0000
=====config_usbotg =====
flash_protect ON: from 0xBF000000 to 0xBF02F0F7
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBF030000 to 0xBF03FFFF
protect on 10
============================================
Ralink UBoot Version: 3.2
--------------------------------------------
ASIC 3052_MP2 (Port5<->GigaSW)
DRAM COMPONENT: 128Mbits
DRAM BUS: 32BIT
Total memory: 32 MBytes
Date:Nov  7 2008  Time:00:24:27
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384

 ##### The CPU freq = 384 MHZ ####

 SDRAM bus set to 32 bit
 SDRAM size =32 Mbytes

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   9: Load Boot Loader code then write to Flash via TFTP.
 0

3: System Boot system code via Flash.
## Booting image at bf050000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.7
   Created:      2012-11-28  10:26:40 UTC

 System Control Status = 0x10440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    887032 Bytes = 866.2 kB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.7 (openwrt@linuxdev.oceano.corp) (gcc version 4
.6.4 20121106 (prerelease) (Linaro GCC 4.6-2012.11) ) #10 Wed Nov 28 08:25:57 BR
ST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 byt
es
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
es: 8128
[    0.000000] Kernel command line:  board=F5D8235_V2 console=ttyS1,57600 mtdpar
ts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(fac
tory),7744k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00021082
[    0.000000] Readback ErrCtl register=00021082
[    0.000000] Memory: 29708k/32768k available (2002k kernel code, 3060k reserve
d, 351k data, 176k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, No
des=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Belkin F5D8235 v2
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[    0.310000] msgmni has been set to 58
[    0.320000] io scheduler noop registered
[    0.330000] io scheduler deadline registered (default)
[    0.340000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.350000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    0.370000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    0.380000] physmap platform flash device: 00800000 at bf000000
[    0.390000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manuf
acturer ID 0x0000c2 Chip ID 0x0022cb
[    0.420000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.430000]   Amd/Fujitsu Extended Query version 1.1.
[    0.440000] number of CFI chips: 1
[    0.440000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    0.460000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.470000] 0x000000000000-0x000000050000 : "u-boot"
[    0.480000] 0x000000050000-0x0000001d0000 : "kernel"
[    0.490000] 0x0000001d0000-0x0000007e0000 : "rootfs"
[    0.510000] mtd: partition "rootfs" set to be root filesystem
[    0.520000] mtd: partition "rootfs_data" created automatically, ofs=630000, l
en=1B0000
[    0.530000] 0x000000630000-0x0000007e0000 : "rootfs_data"
[    0.550000] 0x0000007e0000-0x0000007f0000 : "nvram"
[    0.560000] 0x0000007f0000-0x000000800000 : "factory"
[    0.570000] 0x000000050000-0x0000007e0000 : "firmware"
[    0.590000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, u
sing 33
[    0.610000] TCP: cubic registered
[    0.620000] NET: Registered protocol family 17
[    0.630000] Bridge firewalling registered
[    0.640000] 8021q: 802.1Q VLAN Support v1.8
[    0.650000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.660000] Freeing unused kernel memory: 176k freed
[    2.780000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    5.190000] jffs2: notice: (353) jffs2_build_xattr_subsystem: complete buildi
ng xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 2
 orphan) found.
switching to jffs2
- init -

Please press Enter to activate this console. [    6.800000] Compat-drivers backp
ort release: compat-drivers-2012-09-04-2-gddac993
[    6.820000] Backport based on wireless-testing.git master-2012-09-07
[    6.830000] compat.git: wireless-testing.git
[    6.870000] cfg80211: Calling CRDA to update world regulatory domain
[    6.890000] cfg80211: World regulatory domain updated:
[    6.900000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gai
n, max_eirp)
[    6.910000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20
00 mBm)
[    6.930000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20
00 mBm)
[    6.950000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20
00 mBm)
[    6.960000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20
00 mBm)
[    6.980000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20
00 mBm)
[    7.560000] SCSI subsystem initialized
[    7.830000] usbcore: registered new interface driver usbfs
[    7.840000] usbcore: registered new interface driver hub
[    7.850000] usbcore: registered new device driver usb
[    8.820000] PPP generic driver version 2.4.2
[    8.870000] tun: Universal TUN/TAP device driver, 1.6
[    8.880000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.940000] PPP MPPE Compression module registered
[    9.070000] IPv4 over IPv4 tunneling driver
[    9.100000] l2tp_core: L2TP core driver, V2.0
[    9.140000] l2tp_netlink: L2TP netlink interface
[    9.170000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    9.200000] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    9.480000] gre: GRE over IPv4 demultiplexor driver
[    9.520000] ip_gre: GRE over IPv4 tunneling driver
[    9.610000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   10.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.300000] NET: Registered protocol family 24
[   10.550000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.700000] nf_conntrack version 0.5.0 (466 buckets, 1864 max)
[   11.300000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.430000] PPTP driver version 0.8.5
[   11.990000] Realtek RTL8366RB ethernet switch driver version 0.2.3
[   12.000000] rtl8366rb rtl8366rb: using GPIO pins 1 (SDA) and 2 (SCK)
[   12.010000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
[   12.090000] libphy: rtl8366rb: probed
[   12.550000] xt_time: kernel timezone is -0000
[   13.100000] Netfilter messages via NETLINK v0.30.
[   13.230000] Ebtables v2.0 registered
[   13.620000] ctnetlink v0.93: registering with nfnetlink.
[   13.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.710000] dwc_otg: version 2.72a 24-JUN-2008
[   13.720000] dwc_otg: Core Release: 2.66a
[   13.930000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled
[   13.940000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled
[   13.960000] dwc_otg: Using DMA mode
[   13.960000] dwc_otg: Device using Buffer DMA mode
[   13.970000] dwc_otg dwc_otg.0: DWC OTG Controller
[   13.980000] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
[   14.000000] dwc_otg dwc_otg.0: irq 26, io mem 0x101c0000
[   14.010000] dwc_otg: Init: Port Power? op_state=1
[   14.020000] dwc_otg: Init: Power Port (0)
[   14.030000] hub 1-0:1.0: USB hub found
[   14.030000] hub 1-0:1.0: 1 port detected
[   14.320000] Initializing USB Mass Storage driver...
[   14.330000] usbcore: registered new interface driver usb-storage
[   14.340000] USB Mass Storage support registered.
[   14.370000] usbcore: registered new interface driver ums-alauda
[   14.410000] usbcore: registered new interface driver ums-cypress
[   14.440000] usbcore: registered new interface driver ums-datafab
[   14.470000] usbcore: registered new interface driver ums-freecom
[   14.510000] usbcore: registered new interface driver ums-isd200
[   14.540000] usbcore: registered new interface driver ums-jumpshot
[   14.580000] usbcore: registered new interface driver ums-karma
[   14.610000] usbcore: registered new interface driver ums-sddr09
[   14.650000] usbcore: registered new interface driver ums-sddr55
[   14.680000] usbcore: registered new interface driver ums-usbat
[   15.150000] u32 classifier
[   15.150000]     Performance counters on
[   15.160000]     input device check on
[   15.170000]     Actions configured
[   15.410000] Mirror/redirect action on
[   15.580000] usbcore: registered new interface driver usbhid
[   15.590000] usbhid: USB HID core driver
[   16.680000] fuse init (API version 7.20)
[   20.490000] device eth0.1 entered promiscuous mode
[   20.500000] device eth0 entered promiscuous mode
[   20.510000] br-lan: port 1(eth0.1) entered forwarding state
[   20.520000] br-lan: port 1(eth0.1) entered forwarding state
[   22.520000] br-lan: port 1(eth0.1) entered forwarding state
[   23.770000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33



BusyBox v1.19.4 (2012-11-27 12:39:17 BRST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34389)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:22:75:D4:35:28
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:402 (402.0 B)

eth0      Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:74 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:29387 (28.6 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:402 (402.0 B)

eth0.2    Link encap:Ethernet  HWaddr 00:22:75:D4:35:29
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:73 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:28689 (28.0 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1680 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1680 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:114240 (111.5 KiB)  TX bytes:114240 (111.5 KiB)

root@OpenWrt:/# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
^C
--- 192.168.1.2 ping statistics ---
11 packets transmitted, 0 packets received, 100% packet loss
root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 00:22:75:D4:35:28
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          '''RX packets:0''' errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:906 (906.0 B)

eth0      Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          '''RX packets:0''' errors:0 dropped:0 overruns:0 frame:0
          TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:35713 (34.8 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 00:11:22:33:44:55
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          '''RX packets:0''' errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:906 (906.0 B)

eth0.2    Link encap:Ethernet  HWaddr 00:22:75:D4:35:29
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          '''RX packets:0''' errors:0 dropped:0 overruns:0 frame:0
          TX packets:87 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:34191 (33.3 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2027 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2027 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:138320 (135.0 KiB)  TX bytes:138320 (135.0 KiB)

#3180 adm5120 memory size detection error on EW6104Wg packages defect 2008-02-26

I believe there is an error detecting correct memory size if the device has memory in two banks - 2 x 8M in my case. Please see the attached diff, I think the option to quit before checking next bank was wrong. Works in my case, at least.

Tom


#6717 Routerboard 433AH - chained pci bridges problem kernel Barrier Breaker 14.07 defect 2010-02-21

I have a mildly "interesting" setup here with one pci bridge connected to another. This works fine on a via eden mini-itx board, but booting hangs in the middle of pci scanning on the ar71xx Routerboard 433AH. Would appreciate some help debugging this.

Using openwrt trunk-as-of-saturday-2010-02-20.

Boot log up to hang:

RouterBOOT booter 2.23

RouterBoard 433AH

CPU frequency: 680 MHz
  Memory size: 128 MB

Press any key within 4 seconds to enter setup....
trying dhcp protocol............................. OK
resolved mac address 00:04:75:7C:69:3A
transfer started ............................................ transfer ok, time=1.95s
setting up elf image... OK
jumping to kernel code
Linux version 2.6.32.8 (knan@viconia) (gcc version 4.4.3 (GCC) ) #3 Sun Feb 21 03:25:35 CET 2010
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR7161 rev 2, CPU:680.000 MHz, AHB:170.000 MHz, DDR:340.000 MHz
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 console=ttyS0,115200 gpio=4030 HZ=340000000 mem=1282
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00003030
Readback ErrCtl register=00003030
Memory: 123604k/131072k available (1986k kernel code, 7296k reserved, 523k data, 3164k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is MikroTik RouterBOARD 433/AH
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: PME# disabled
pci 0000:00:14.0: PCI bridge, secondary bus 0000:01
pci 0000:00:14.0:   IO window: disabled
pci 0000:00:14.0:   MEM window: disabled
pci 0000:00:14.0:   PREFETCH window: disabled

#6811 adm5120 - no networking after UDP storm kernel Barrier Breaker 14.07 defect 2010-03-06

I've been testing trunk r20018 on Edimax BR6104K (adm5120 platform).

After running UDP test using iperf between two computers connected through router:

iperf -c 192.168.1.2 -u -b 50m -d

Router seems to be dead from network and is only accessible over serial line.

How to reproduce:

  1. Setup networking between computers connected to router
ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up
ifconfig eth0 192.168.1.1 netmask 255.255.255.0 up
  1. Perform iperf test
iperf -s -u   #on computer with ip address 192.168.1.2
iperf -c 192.168.1.2 -u -b 50m -d   #on computer 192.168.0.2

Expected result: Under heavy load router should start dropping packets when consuming all available memory and should not drop packets after the the test finished.

Actual result: Under heavy load router consumes all memory and starts dropping packets. When the test finished, router has free memory again but packetloss is kept very high.

Ping from inside:

root@(none):/# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
64 bytes from 192.168.1.2: seq=4 ttl=128 time=1.952 ms
64 bytes from 192.168.1.2: seq=6 ttl=128 time=1.133 ms
64 bytes from 192.168.1.2: seq=7 ttl=128 time=9.475 ms
64 bytes from 192.168.1.2: seq=17 ttl=128 time=2.469 ms
64 bytes from 192.168.1.2: seq=19 ttl=128 time=1.646 ms
64 bytes from 192.168.1.2: seq=0 ttl=128 time=20015.800 ms
64 bytes from 192.168.1.2: seq=1 ttl=128 time=19015.264 ms
64 bytes from 192.168.1.2: seq=2 ttl=128 time=18014.648 ms
^C
--- 192.168.1.2 ping statistics ---
23 packets transmitted, 8 packets received, 65% packet loss

Ping from outside:

# ping 192.168.0.1 -c 50
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
From 192.168.0.2: icmp_seq=10 Destination Host Unreachable
From 192.168.0.2 icmp_seq=10 Destination Host Unreachable
From 192.168.0.2 icmp_seq=11 Destination Host Unreachable
From 192.168.0.2 icmp_seq=12 Destination Host Unreachable
64 bytes from 192.168.0.1: icmp_seq=16 ttl=64 time=0.966 ms
64 bytes from 192.168.0.1: icmp_seq=18 ttl=64 time=0.694 ms
64 bytes from 192.168.0.1: icmp_seq=20 ttl=64 time=0.706 ms
64 bytes from 192.168.0.1: icmp_seq=21 ttl=64 time=0.640 ms
64 bytes from 192.168.0.1: icmp_seq=47 ttl=64 time=0.709 ms

--- 192.168.0.1 ping statistics ---
50 packets transmitted, 5 received, +4 errors, 90% packet loss, time 49001ms

Serial line communication is attached.


#6938 SD card detected if connected before RS Pro boots but not if connected afterwards base system Barrier Breaker 14.07 defect 2010-03-25

Hardware : Ubiquiti RouterStation Pro
Firmware : KAMIKAZE (bleeding edge, r20410) built by us

We originally detected the problem with r20010

After booting with 2 GB SD card connected :-

root@OpenWRT:~# fdisk -l
Disk /dev/sda: 2006 MB, 2006974464 bytes
13 heads, 12 sectors/track, 25127 cylinders
Units = cylinders of 156 * 512 = 79872 bytes
Disk identifier: 0x00000000
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       25127     1959900   83  Linux

root@OpenWRT:~# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. USB 2.0 SD/MMC/MS Flash Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

If the SD card is then removed and reconnected or connected after booting fdisk shows nothing. The lsusb output doesn't change. A USB flash stick is detected as expected.

Loaded modules with iptables lines deleted :-

root@OpenWRT:~# lsmod | sort
Module                  Size  Used by    Not tainted
button_hotplug          2576  0
cls_fw                  3232  0
crc_ccitt                976  1 ppp_async
ehci_hcd               31120  0
ext2                   42256  0
ext3                   91296  0
fat                    42256  1 vfat
ftdi_sio               28224  0
gpio_buttons            1968  0
imq                     2560  0
input_core             16896  4 button_hotplug,gpio_buttons,input_polldev
input_polldev           1360  1 gpio_buttons
jbd                    31392  1 ext3
leds_gpio               1456  0
loop                    9888  0
mmc_block               6304  0
mmc_core               34864  1 mmc_block
nls_base                4800  8 vfat,fat,nls_utf8,nls_iso8859_1,nls_cp852,nls_cp850,nls_cp437,usbcore
nls_cp437               4368  0
nls_cp850               3600  0
nls_cp852               3600  0
nls_iso8859_1           2832  0
nls_utf8                 816  0
ohci_hcd               16896  0
ppp_async               6400  0
ppp_generic            18848  3 pppoe,pppox,ppp_async
pppoe                   8304  0
pppox                   1216  1 pppoe
sch_hfsc               14320  0
sch_red                 3504  0
sch_sfq                 4416  0
scsi_mod               68160  3 sg,usb_storage,sd_mod
sd_mod                 21600  0
sg                     19232  0
slhc                    4176  1 ppp_generic
ts_bm                   1456  0
ts_fsm                  2608  0
ts_kmp                  1344  0
tun                    10064  0
usb_storage            31920  0
usbcore                97392  6 ftdi_sio,usb_storage,usbserial,ohci_hcd,ehci_hcd
usbserial              23856  1 ftdi_sio
vfat                    7696  0

#7977 Enhance rtl8366rb driver kernel Barrier Breaker 14.07 enhancement 2010-09-22

The GPL sources for Belkin F5D8235 contain a driver for the rtl8366rb switch that exposes many interesting features, like maximum packet length setting, port bandwidth control, port priority and more. It would be nice if these controls were available in swcontrol. I created a patch to control the maximum packet length (jumbo frames), but I can't test is as I later discovered that only one of my gigabit ethernet devices supports long frames.

The sources can be downloaded at: https://www.belkin.com/support/opensource/files/F5D8235v2-2.01.07-GPL.tar.gz The driver is at: Belkin_F5D8235-4_v2000_v2.01.07/Uboot_SDK_3200/drivers/rtl8366RB/ in the archive


#8022 IP17xx switch driver resets IP175A packages Barrier Breaker 14.07 defect 2010-10-02

The IP175A switch does not support reset via BMCR (MII control reg 0).

IP17xx.c line 862 writes to each ports BMCR with reset bit asserted.

The BMCR default value should be 0x3100 but the trunk version of the switch driver sets it to 0x0000, and it is not possible to change its value after this.


#8066 ip17xx Driver is Missing Running State kernel Chaos Calmer 15.05 defect 2010-10-09

Because the interface to a switch is fixed, the PHY state should be set to running in case the switch MAC0 is down or not connected.

Attached is a patch to add the state to the ip17xx_read_status function.


#8680 FR-300RTR (DIR-615 E1) can boot DIR-600 A1 firmware other Barrier Breaker 14.07 enhancement 2011-01-19

This should be an easy addition to the AR71xx target profiles. I changed the hardware signature in the dir-600 A1 firmware to AP93-AR7240-RT-081028-00 and loaded it from the D-Link Firmware Upgrade/Recovery console. This router appears to be 100% functional with Trunk r25043 (a bug in previous revisions prevents booting).


#8878 Add USB initialisation for WR741ND/WR841NDV7 Board base system Barrier Breaker 14.07 enhancement 2011-02-17

There is no USB support out of the box, but with mod, it works very well!

Simply append the following patch from wiki!


#10439 ar71xx: pll_reg 0xb8050018: 0x13000a44 message in kernel log packages Barrier Breaker 14.07 defect 2011-11-17

Noticed this ar71xx: pll_reg 0xb8050018: 0x13000a44 message in kernel log.

It seem to be related to the ppoe connection going down, never seen it before and unsure if this is correct behaviour...

Router works perfectly despite message up for over 2 days

Kernel log


Linux version 2.6.39.4 (mike@mike-desktop) (gcc version 4.5.4 20110808 (prerelease) (Linaro GCC 4.5-2011.08) ) #7 Mon Nov 14 13:25:51 WST 2011 prom: fw_arg0=00000007, fw_arg1=a3f57fb0, fw_arg2=a3f58480, fw_arg3=00000020 MyLoader: sysp=00000000, boardp=00000000, parts=00000000 bootconsole [early0] enabled CPU revision is: 00019374 (MIPS 24Kc) SoC: Atheros AR9132 rev 2 Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz Determined physical RAM map:

memory: 04000000 @ 00000000 (usable)

Initrd not found or empty - disabling initrd Zone PFN ranges:

Normal 0x00000000 -> 0x00004000

Movable zone start PFN for each node early_node_map[1] active PFN ranges

0: 0x00000000 -> 0x00004000

On node 0 totalpages: 16384 free_area_init_node: node 0, pgdat 802bdaa0, node_mem_map 81000000

Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3

pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: board=WZR-HP-G300NH console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 61832k/65536k available (2027k kernel code, 3704k reserved, 397k data, 180k init, 0k highmem) SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:80 Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 NET: Registered protocol family 16 MIPS: machine is Buffalo WZR-HP-G300NH Found an RTL8366RB switch bio: create slab <bio-0> at 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 32 squashfs: version 4.0 (2009/01/31) Phillip Lougher JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. msgmni has been set to 120 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A console [ttyS0] enabled, bootconsole disabled Atheros AR71xx SPI Controller driver version 0.2.4 ar91xx-flash ar91xx-flash: 02000000 at 1e000000 ar91xx-flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201 Amd/Fujitsu Extended Query Table at 0x0040

Amd/Fujitsu Extended Query version 1.3.

number of CFI chips: 1 ar91xx-flash ar91xx-flash: using static partition mapping Creating 7 MTD partitions on "ar91xx-flash": 0x000000000000-0x000000040000 : "u-boot" 0x000000040000-0x000000060000 : "u-boot-env" 0x000000060000-0x000000160000 : "kernel" 0x000000160000-0x000001fc0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=1C20000 0x0000003a0000-0x000001fc0000 : "rootfs_data" 0x000001fc0000-0x000001fe0000 : "user_property" 0x000001fe0000-0x000002000000 : "art" 0x000000060000-0x000001fc0000 : "firmware" Realtek RTL8366RB ethernet switch driver version 0.2.3 rtl8366rb rtl8366rb: using GPIO pins 19 (SDA) and 20 (SCK) rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found rtl8366rb: probed eth0: Atheros AG71xx at 0xb9000000, irq 4 eth0: using fixed link parameters eth1: Atheros AG71xx at 0xba000000, irq 5 eth1: connected to PHY at rtl8366rb:04 [uid=001cc961, driver=Generic PHY] Atheros AR71xx hardware watchdog driver version 0.1.0 ar71xx-wdt: timeout=15 secs (max=21) TCP westwood registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@…> All bugs added by David S. Miller <davem@…> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 180k freed input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0 Button Hotplug driver version 0.4.1 ar71xx: pll_reg 0xb8050014: 0x1f000000 eth0: link up (1000Mbps/Full duplex) Registered led device: buffalo:orange:security Registered led device: buffalo:green:wireless Registered led device: buffalo:green:router Registered led device: buffalo:red:diag Registered led device: buffalo:blue:usb JFFS2 notice: (436) jffs2_build_xattr_subsystem: complete building xattr subsystem, 22 of xdatum (0 unchecked, 21 orphan) and 31 of xref (0 dead, 21 orphan) found. eth0: link down Compat-wireless backport release: compat-wireless-2011-10-14 Backport based on wireless-testing.git master-2011-11-04 cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ath: EEPROM regdomain: 0x0 ath: EEPROM indicates default country code should be used ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2 cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) PPP generic driver version 2.4.2 ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 24 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1 ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000 ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected nf_conntrack version 0.5.0 (968 buckets, 3872 max) xt_time: kernel timezone is -0000 ar71xx: pll_reg 0xb8050014: 0x1f000000 eth0: link up (1000Mbps/Full duplex) device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.1) entering forwarding state br-lan: port 1(eth0.1) entering forwarding state cfg80211: Calling CRDA for country: AU cfg80211: Regulatory domain changed to country: AU cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering forwarding state br-lan: port 2(wlan0) entering forwarding state ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) device wlan0 left promiscuous mode br-lan: port 2(wlan0) entering forwarding state device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering forwarding state br-lan: port 2(wlan0) entering forwarding state u32 classifier

Performance counters on input device check on Actions configured

Mirror/redirect action on ar71xx-wdt: enabling watchdog timer eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex) eth1: link down ar71xx: pll_reg 0xb8050018: 0x13000a44 eth1: link up (100Mbps/Full duplex)



#13452 DIR-825 wlan phy1 invalid mac address kernel Barrier Breaker 14.07 defect 2013-05-02

After upgrading to AA 12.09 on a DIR-825 rev B2, the second radio doesn't come up and the kernel log shows:

ath: phy1: eeprom contains invalid mac address

I assume this is related to the changes in r35731. I reverted to 12.09 RC1 on the same router and the second radio comes back up with the correct mac address, so the caldata partition doesn't seem to have been corrupted.


#8004 [openrb] [backfire 10.03] Image fails to boot base system Chaos Calmer 15.05 defect 2010-09-26

Using the provides binary image (and compiling) fails to boot.

U-Boot customized version (May 23 2008 - 11:37:01)
(c) by denx.de, (c) by OpenRB.com (V20082104)  

CPU:   IBM PowerPC 405EP Rev. B at 266.666 MHz (PLB=133, OPB=66, EBC=33 MHz)
       IIC Boot EEPROM disabled
       PCI async ext clock used, internal PCI arbiter enabled
       16 kB I-Cache 16 kB D-Cache
HW_ID: PPC405 Open Platform (OpenRB.com)
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Net:   ppc_405x_eth0
Hit any key to stop autoboot:  0 
OpenRB> printenv
bootcmd=run flashsys
bootdelay=3
baudrate=115200
ethaddr=00:50:C2:1E:AF:FE
eth1addr=00:50:C2:1E:AF:FD
ipaddr=192.168.0.50
serverip=192.168.0.1
netmask=255.255.255.0
flashsys=setenv bootargs console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit;bootm $(kernel_addr)
kernel_addr=ff800000
bootargs=console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot customized version (May 23 2008 - 11:37:01)
(c) by denx.de, (c) by OpenRB.com (V20082104)  

Environment size: 573/1788 bytes
U-Boot customized version (May 23 2008 - 11:37:01)
(c) by denx.de, (c) by OpenRB.com (V20082104)  

CPU:   IBM PowerPC 405EP Rev. B at 266.666 MHz (PLB=133, OPB=66, EBC=33 MHz)
       IIC Boot EEPROM disabled
       PCI async ext clock used, internal PCI arbiter enabled
       16 kB I-Cache 16 kB D-Cache
HW_ID: PPC405 Open Platform (OpenRB.com)
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Net:   ppc_405x_eth0
Hit any key to stop autoboot:  0 
## Booting image at ff800000 ...
   Image Name:   Linux-2.6.32.10
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1241644 Bytes =  1.2 MB
   Load Address: 00400000
   Entry Point:  004004cc
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
CPU clock-frequency <- 0xfe501a0 (267MHz)
CPU timebase-frequency <- 0xfe501a0 (267MHz)
/plb: clock-frequency <- 7f280d0 (133MHz)
/plb/opb: clock-frequency <- 3f94068 (67MHz)
/plb/ebc: clock-frequency <- 1fca034 (33MHz)
/plb/opb/serial@ef600300: clock-frequency <- a98abc (11MHz)
/plb/opb/serial@ef600400: clock-frequency <- a98abc (11MHz)
Memory <- <0x0 0x2000000> (32MB)
ENET0: local-mac-address <- 00:50:c2:1e:af:fe
ENET1: local-mac-address <- 00:50:c2:1e:af:fd

zImage starting: loaded at 0x00400000 (sp: 0x01f93f40)
Allocating 0x29cbb0 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040f000:0x006aca50)...done 0x28a5e8 bytes

Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
Finalizing device tree... flat tree at 0x6b9300
Using PowerPC 40x Platform machine description
Linux version 2.6.32.10 (openwrt@wrt1.marcant.net) (gcc version 4.4.3 (GCC) ) #16 Tue Apr 6 16:46:05 CEST 2010
bootconsole [udbg0] enabled
setup_arch: bootmem
arch: exit
Zone PFN ranges:
  DMA      0x00000000 -> 0x00002000
  Normal   0x00002000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29780k/32768k available (2468k kernel code, 2988k reserved, 136k data, 70k bss, 120k init)
Kernel virtual memory layout:
  * 0xffffe000..0xfffff000  : fixmap
  * 0xfde00000..0xfe000000  : consistent mem
  * 0xfddfe000..0xfde00000  : early ioremap
  * 0xc3000000..0xfddfe000  : vmalloc & ioremap
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
UIC0 (32 IRQ sources) at DCR 0xc0
clocksource: timebase mult[f00010] shift[22] registered
Mount-cache hash table entries: 512
NET: Registered protocol family 16
             
PCI host bridge /plb/pci@ec000000 (primary) ranges:
 MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 
  IO 0x00000000e8000000..0x00000000e800ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCI: Probing PCI hardware
PCI: Hiding 4xx host bridge resources 0000:00:00.0
bio: create slab <bio-0> at 0
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.
msgmni has been set to 58
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xef600300 (irq = 16) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0xef600400 (irq = 17) is a 16550A
ef600300.serial: ttyS0 at MMIO 0xef600300 (irq = 16) is a 16550
ef600400.serial: ttyS1 at MMIO 0xef600400 (irq = 17) is a 16550
ff800000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
ff800000.nor_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Creating 3 MTD partitions on "ff800000.nor_flash":
0x000000000000-0x000000120000 : "linux"
0x000000120000-0x0000007c0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
split_squashfs: no squashfs found in "ff800000.nor_flash"
0x0000007c0000-0x0000007f0000 : "u-boot"
PPC 4xx OCP EMAC driver, version 3.54
MAL v1 /plb/mcmal, 4 TX channels, 2 RX channels
eth0: EMAC-0 /plb/opb/ethernet@ef600800, MAC 00:50:c2:1e:af:fe
eth0: found Generic MII PHY (0x00)
/plb/opb/ethernet@ef600900: reset timeout
/plb/opb/ethernet@ef600900: can't find PHY!
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0xe573 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x78e7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xadce instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0xd764 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x3d24 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0xaeea instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0xe332 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0xa17a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x8ee6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0x9a0f instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x6873 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0xfe02 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0x4749 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0x1100 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0x0200 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0xc000 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0x0400 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0xf703 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120028: 0x746d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120030: 0x6c6d instead
Further such events for this erase block will not be printed
Empty flash at 0x00120038 ends at 0x00120040
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130000: 0x6de8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130004: 0xf2fa instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130008: 0xbf53 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0013000c: 0xd36c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130010: 0xc7ef instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130014: 0x9a0e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130018: 0x42e1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0013001c: 0x288d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130020: 0xb13e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130024: 0xd00b instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xdf1f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0x4e6d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x85d8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x0ae1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0x35e1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x03cf instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xea3b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x6c67 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xcd0d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0x5f81 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150000: 0xd22a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150004: 0xf92c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150008: 0xe4b2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0015000c: 0x184b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150010: 0xe8fb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150014: 0xac3d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150018: 0xe9a7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0015001c: 0x50b7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150020: 0x99fd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150024: 0xd332 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0015d938
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0x5497 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x0498 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160008: 0xcdae instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016000c: 0x8d07 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160010: 0x6696 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160014: 0x0827 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0xad0c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0xc578 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0x5af1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0x4702 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0016dfd0
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170000: 0x5ff0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170004: 0xbdb0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170008: 0xcc24 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0017000c: 0x7e69 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170010: 0xb719 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170014: 0xb41d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170018: 0x1664 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0017001c: 0x15f2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170020: 0xa1e3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00170024: 0xe181 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0x95c8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0xf176 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180008: 0x6092 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018000c: 0x8c19 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180010: 0x0f9f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180014: 0x763e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0x1e87 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0x775e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0x7151 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0x9bed instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0018d200
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190000: 0x5293 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190004: 0xe55c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190008: 0x140b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0019000c: 0xb2e8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190010: 0xb7cd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190014: 0x046c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190018: 0xe8bc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0019001c: 0x8ad4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190020: 0xd35f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00190024: 0x5eb4 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0019bb60
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x474e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x6ed2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0008: 0xf96b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a000c: 0x391f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0010: 0x91bd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0014: 0xe405 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0x0f44 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0x0a75 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0x43fe instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0x5e58 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0000: 0x5e4a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0004: 0x351a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0008: 0x00f8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b000c: 0x2182 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0010: 0x05a6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0014: 0x5f13 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0018: 0x2c55 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b001c: 0x582e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0020: 0xaa10 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001b0024: 0x32f8 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001bb610
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0xc753 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x5009 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0008: 0x588c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c000c: 0x8c04 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0010: 0xfbb9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0014: 0xd451 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0x61bd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c001c: 0x6679 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0020: 0x7fed instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0024: 0x4769 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0000: 0x890d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0004: 0xe3ef instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0008: 0x1288 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d000c: 0xe7e3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0010: 0x710e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0014: 0x540d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0018: 0xc7ab instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d001c: 0xeaf3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0020: 0xef4b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001d0024: 0x723f instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0xe372 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x913f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0008: 0xcc35 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e000c: 0x02f4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0010: 0x066f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0014: 0x45fb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0xf17e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e001c: 0xdb4d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0020: 0x3d06 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0024: 0x7876 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001e244c
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0000: 0xd7d3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0004: 0x386a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0008: 0xf8c0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f000c: 0x344b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0010: 0xe765 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0014: 0xe110 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0018: 0x7fdb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f001c: 0x1788 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0020: 0xf80e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0024: 0x280a instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x5a71 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0xa27e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200008: 0xeac3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020000c: 0x68fb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200010: 0xe9b3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200014: 0xbc71 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xeb28 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020001c: 0x81d7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200020: 0xdd2f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200024: 0x74bf instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210000: 0x53bf instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210004: 0xf3ad instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210008: 0xcf0b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0021000c: 0xce43 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210010: 0x075c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210014: 0x0aa5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210018: 0xa39d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0021001c: 0x8f8b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210020: 0xca1f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00210024: 0x9594 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0xe8c6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0x9318 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220008: 0x7ea4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022000c: 0xd4ca instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220010: 0x4a99 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220014: 0x5811 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0x1e53 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022001c: 0xf687 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220020: 0x1d19 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220024: 0x88e9 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0022db88
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230000: 0x05a2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230004: 0xaa00 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230008: 0xe3ca instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0023000c: 0x5ad0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230010: 0x510d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230014: 0xe96e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230018: 0x64b0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0023001c: 0x994f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230020: 0xeb17 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00230024: 0xe600 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x88a1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0x82dc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240008: 0x7fa9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024000c: 0x6cec instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240010: 0x9126 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240014: 0x490e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0x65ef instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024001c: 0xc5fa instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240020: 0x1ab8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240024: 0x9b4c instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250000: 0x3264 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250004: 0x3503 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250008: 0x3953 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0025000c: 0xcc91 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250010: 0x637a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250014: 0x5b50 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250018: 0x63a8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0025001c: 0x73fa instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250020: 0xa3fa instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00250024: 0xdb60 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260000: 0x13ba instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260004: 0x3270 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260008: 0x0acd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0026000c: 0x928c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260010: 0x517f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260014: 0x4c07 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260018: 0x5c9c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0026001c: 0xc7bb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260020: 0xaa0c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00260024: 0x9879 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): End of filesystem marker found at 0x270000
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 67, bad_blocks 0, c->nr_blocks 106
VFS: Cannot open root device "mtdblock1" or unknown-block(31,1)
Please append a correct "root=" boot option; here are the available partitions:
1f00            1152 mtdblock0 (driver?)
1f01            6784 mtdblock1 (driver?)
1f02             192 mtdblock2 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,1)
Rebooting in 180 seconds..

#8047 WR741ND LAN and WAN LED don't blink under data transfer on 10.03.1 RC3 packages Chaos Calmer 15.05 defect 2010-10-07

WR741ND LAN and WAN LED don't blink under data transfer on 10.03.1 RC3


#8960 sysupgrade with copying old config files fails on wrt160nl base system Chaos Calmer 15.05 defect 2011-03-02

Running sysupgrade on linksys wrt160nl and copying old config files (either the automatic way or with -f and a tarball), breaks the CRC and router will not boot after reflashing.

According to the forum thread where this first came out (https://forum.openwrt.org/viewtopic.php?id=27189), sysupgrade broke starting with a change to /package/mtd/src in r22881

The issue can be worked around by adding the following to /lib/upgrade/common.sh (and rebooting?) before running sysupgrade

Index: package/base-files/files/lib/upgrade/common.sh
===================================================================
--- package/base-files/files/lib/upgrade/common.sh    (revision 23944)
+++ package/base-files/files/lib/upgrade/common.sh    (working copy)
@@ -174,6 +174,10 @@
             jffs2_copy_config
         fi
     }
+
+    echo "fixing TRX"
+    mtd fixtrx -o 32 firmware
+
     v "Upgrade completed"
     [ -n "$DELAY" ] && sleep "$DELAY"
     ask_bool 1 "Reboot" && {

This works for now, there's probably a better fix to be had in mtd...


#11808 VLAN id 0 on untagged ports base system Bugs Paradise defect 2012-07-04

I'am using TP-Link 741ND (HW rev. 1.4) and trunk r32500. I have next (attached file) configuration on my router for VLAN switching. port №1 - my new WAN port port №2 - port for VLAN 777 port №3,4 - ports for Internet via NAT

With this configuration from ports 3 and 4 I have ethernet frames with VLAN ID=0 (ports 3 and 4 - untagged ports in my configuration). Why? Windows 7 and Vista works fine, but in Windows XP I have problem. Windows XP can not properly handle such frames.


kaloz (13 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#11281 ixp4xx: illegal memory access on boot kernel Barrier Breaker 14.07 defect 2012-04-13

The current trunk snapshot for the ixp4xx target (cambria) give this error right after plugging the power:

Uncompressing Linux... command abort - illegal memory access?

Backfire 10.03.1 works fine.


#9929 Freecom DataTank Gateway 1TB pre-built image does not work after install base system Bugs Paradise defect 2011-08-12

Hey, I tried to install the pre-built 'dt2' webupgrade image several times (both 10.03 and beta 5) but after that the device rebooted with the 1TB flashlight flashing about 4x a sec. and the device not being reachable at 192.168.1.1 (even after giving my pc a manual IP of 192.168.1.10). So this prebuilt image doesn't work. It's strange 'Freecom' isn't mentioned in the official list of supported devices but yet there is an image prebuilt for both dt and fsg (different architectures). This is the forum topic about dt2: https://forum.openwrt.org/viewtopic.php?pid=84200#p84200 and some other guy who did get it working apparently (lookup his website link), I think he was the one who submitted dt2 support to you. Anyway, how was I supposed to install/use those other 2 prebuilt dt2-images? They don't install through recovery procedure. But I guess if the webupgrade image failed to work (after installing well) they would too.


#10754 support for MI424WR Rev D base system Features Paradise enhancement 2012-01-08

Hi

Can some one add support for this MI424WR Rev D?

currently it's only Rev C is working.

Rev D need Wan and Lan Swap with PHY address.

Thanks


#5227 Patch to enable building NGW100 firmware to boot from SD/MMC base system enhancement 2009-05-27

This is a patchset to enable booting an NGW100 image from SD or MMC. Credits go to medve / i`yyy.


#7374 NSLU2 support for "DISK 1" and "DISK 2" leds base system Chaos Calmer 15.05 enhancement 2010-05-23

Turn on "DISK 1" and/or "DISK 2" led(s) when something is connected to the related usb port (and obviusly off when removed)


#8271 [wrt350nv2] keytype for gpio-keys in kernel kernel Chaos Calmer 15.05 enhancement 2010-11-18

At present the setup for orion/wrt350nv2 does not include a keytype.

With the enclosed patch for kernel 2.6.36 it is possible to use the buttons with kernel driver (kmod-input-gpio-keys).

It integrates the wps-button in hotplug-button / hotplug2 - system.

see also post #939

Patch can be included in: trunk/target/linux/orion/patches-2.6.36
Filename: 110-wrt350nv2-keytype.patch

--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -75,11 +75,13 @@ static struct gpio_keys_button wrt350n_v
 		.code		= KEY_RESTART,
 		.gpio		= 3,
 		.desc		= "Reset Button",
+                .type           = EV_KEY,
 		.active_low	= 1,
 	}, {
 		.code		= KEY_WPS_BUTTON,
 		.gpio		= 2,
 		.desc		= "WPS Button",
+                .type           = EV_KEY,
 		.active_low	= 1,
 	},
 };

#9263 vlans don't work on NSLU2; fix provided kernel Barrier Breaker 14.07 defect 2011-04-18

Having recently switched my slugs (i.e. Linksys NSLU2s) over to OpenWRT from Debian, I discovered that trying to use vlans (802.11(q)) failed miserably, and led to other problems with the ethernet interface. Looking into it, I noticed that the firmware (/lib/firmware/NPE-B) used by Debian and OpenWRT was different. I have no idea what the provenance of these files is, but simply replacing the OpenWRT version of the firmware with the Debian one fixed the problem. This should probably be the default.


#11315 Section reference mismatch warnings during ixp4xx build packages Barrier Breaker 14.07 defect 2012-04-20

I´m getting the following warnings during build: WARNING: arch/arm/mach-ixp4xx/built-in.o(.text+0x624): Section mismatch in reference from the function at24_setup() to the (unknown reference) .init.data:(unknown) The function at24_setup() references the (unknown reference) initdata (unknown). This is often because at24_setup lacks a initdata annotation or the annotation of (unknown) is wrong.

Attached patch fixes this for all 4 kernel versions


#11852 Snapshot build of wrt350nv2 bricks it other Barrier Breaker 14.07 defect 2012-07-12

When using a snapshot build of wrt350nv2, wired connection is lost to it after a reboot. Device does not even function as a plain switch as I can not ping other computer with fixed IP address connected to it. LAN and Internet LEDs blink, but no connection so recovery must be done. Could it be that some important package is not included in the build? I tried loading a snapshot build more than a year ago and thought that maybe I did something wrong back then or maybe trunk was broken at that particular moment, but unfortunately I see that nothing has changed and snapshot builds still do not work.


#17947 Target System (x86_64) can't mount /dev/sda2 packages Chaos Calmer 15.05 defect 2014-09-21

Target System (x86_64) can't mount /dev/sda2

I've tested snapshots and build firmware by myself using default config: http://downloads.openwrt.org/snapshots/trunk/x86_64/config

http://downloads.openwrt.org/snapshots/trunk/x86_64/openwrt-x86_64-combined-ext4.img.gz

It stop at "Waiting for root device /dev/sda2...", I think there are some driver is not built into the linux kernel.

Test method using qemu(or burn to pc) wget http://downloads.openwrt.org/snapshots/trunk/x86_64/openwrt-x86_64-combined-ext4.img.gz gunzip openwrt-x86_64-combined-ext4.img.gz qemu-system-x86_64 -hda openwrt-x86_64-combined-ext4.img


I also tested x86, it is ok! why x86_64 is failed!

wget http://downloads.openwrt.org/snapshots/trunk/x86/openwrt-x86-generic-combined-ext4.img.gz gunzip openwrt-x86-generic-combined-ext4.img.gz qemu-system-x86_64 openwrt-x86-generic-combined-ext4.img


#8160 wnr854t does not have leds nor input support. kernel Barrier Breaker 14.07 enhancement 2010-11-01

The WNR854T board does not support leds nor input in the linux tree. Patch attached.


#8583 Add Actiontec MI424-WR to IXP4xx Supported Boards (dev wiki) website defect 2011-01-04

The Actiontec MI424-WR (http://wiki.openwrt.org/toh/actiontec/mi424wr) is supported, but not listed on the Development Wiki for Platform IXP4xx: https://dev.openwrt.org/wiki/ixp4xx

Please add the Actiontec MI424-WR to the supported boards list for IXP4xx.


#8967 dropbear inetd mode regression from openwrt package 0.52 -> 0.53 packages Barrier Breaker 14.07 defect 2011-03-03

the patch 120-openwrt_options.patch for dropbear 0.53 disables inetd mode (#define INETD_MODE), which is a regression from the 0.52 package.

This not only caught me by surprise since I'm using inetd to run my daemons, but it is unecessary: The deamon with inetd mode enabled does *not* have a larger filesize - I'd advise to re-enable it by default, since it doesn't hurt anyone but might confuse some unsuspecting legacy users like me.


loswillios (1 match)

Ticket Summary Component Milestone Type Severity Created
Description
#9240 DISPLAY_SUPPORT not necessary for dejavu true type font packages Barrier Breaker 14.07 enhancement 2011-04-14

The dejavu true type font have an DISPLAY_SUPPORT dependency. But I think is not necessary. I'm developing a vdr package and I need this dejavu true type font. So can it be changed?


luka (3 matches)

Ticket Summary Component Milestone Type Severity Created
Description
#12796 [kirkwood] USB doesn't work on Seagate GoFlex Home kernel Chaos Calmer 15.05 defect 2013-01-13

It's serious problem with OpenWRT and USB. I tried to run lastest trunk, but it's a problem with USB ! Precisely USB doesn't work at all, I think that's because there is no "Marvell Orion EHCI" drivers. In AA version of OpenWRT was something like that:

....
[    2.349177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.355777] orion-ehci orion-ehci.0: Marvell Orion EHCI
[    2.361090] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[    2.397699] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[    2.417686] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[    2.424173] hub 1-0:1.0: USB hub found
....


#11878 problem iomega iconnect, kernel not booting kernel Barrier Breaker 14.07 defect 2012-07-17

I compiled from source 32 739 and 32 750 images for iConnect. After flashing the device, the kernel will not start. Is halt: NAND read: device 0 offset 0x100000, size 0x200000

2097152 bytes read: OK

## Booting kernel from Legacy Image at 02000000 ...

Image Name: Linux-3.3.8 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1268472 Bytes = 1.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK

OK Using machid 0x692 from environment

Starting kernel ...

Uncompressing Linux... done, booting the kernel. I downloaded the current image from the downloads.openwrt.org and this also will not start. With earlier there was no problem.


#13469 freecwmp compilation error packages Barrier Breaker 14.07 defect 2013-05-06

Two problems: 1) freecwmp Makefile always compile libzstream eventhough only freecwmp-curl module is selected.

2) libzstream compilation error: "ISO C forbids braced-groups within expressions".


1 2
Note: See TracReports for help on using and creating reports.