Modify

Opened 4 years ago

Closed 4 years ago

Last modified 22 months ago

#11847 closed defect (fixed)

Virtual AP doesn't work for r32669

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description

I have a WR1043ND as WDS AP and WR941ND v3 as WDS STA. A virtual AP is added to WR941ND. r32669 was installed and the Wifi of WDS STA couldn't be enabled. When I tried to enable the WDS STA using Luci, an error with "Wireless is disabled or not associated" was shown. At the same time, the Virtual AP was being enabled. Messages, file attached, were shown when tried to start wifi using "wifi" command with ssh. The file, wireless, is also attached for reference. The WDS STA can be enabled if I commented out the virtual AP section of the file, wireless.

Attachments (2)

wifi Failed.txt (546 bytes) - added by digitaltuner@… 4 years ago.
Message shown when using "Wifi" command
wireless (645 bytes) - added by digitaltuner@… 4 years ago.
Wireless file for WR941ND

Download all attachments as: .zip

Change History (7)

Changed 4 years ago by digitaltuner@…

Message shown when using "Wifi" command

Changed 4 years ago by digitaltuner@…

Wireless file for WR941ND

comment:1 Changed 4 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

fixed in r32684

comment:2 Changed 4 years ago by digitaltuner@…

  • Resolution fixed deleted
  • Status changed from closed to reopened

Don't know if I should open a new ticket or reopen this one. Virtual AP still doesn't work for r32689. Both the WDS STA and virtual AP can be enabled after installing r32689. However, the signal of the virtual AP is alway 0 dBm whenever WDS STA is enabled. If WDS STA is disabled, the virtual AP seems normal again.

comment:3 Changed 4 years ago by digitaltuner@…

The problem of virtual AP being disabled is a configuration problem. I used to use channel 1 and changed to channel 6 recently. Auto setting in channel selection is only possible for channel 1. To use channel 6, channel 6 needs to be set explicitly in the WDS STA. My wireless working probably now and this ticket can be closed.

comment:4 Changed 4 years ago by nbd

  • Resolution set to fixed
  • Status changed from reopened to closed

comment:5 Changed 22 months ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.