Modify

Opened 3 years ago

Closed 11 months ago

Last modified 11 months ago

#14316 closed task (wontfix)

Wi-Fi doesn't work on ASUS RT-N10U

Reported by: i.nizametdinov@… Owned by: hauke
Priority: normal Milestone: Chaos Calmer 15.05
Component: kernel Version: Trunk
Keywords: asus rt-n10u, wi-fi Cc:

Description

[ 0.000000] Linux version 3.10.13 (rt-n@gta) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38304) ) #7 Sun Oct 13 14:37:17 PKT 2013
[ 0.000000] CPU revision is: 00019749 (MIPS 74Kc)
[ 0.000000] bcm47xx: using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x5357, rev 0x02 and package 0x08
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x26, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x04, class 0x0)
[ 0.000000] bcma: bus0: Found rev 9 PMU (capabilities 0x28A42A09)
[ 0.000000] bcma: bus0: Found serial flash
[ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802d05d0, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 29068k/32768k available (2386k kernel code, 3700k reserved, 568k data, 176k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.032000] Calibrating delay loop... 149.50 BogoMIPS (lpj=299008)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.032000] Mount-cache hash table entries: 512
[ 0.036000] NET: Registered protocol family 16
[ 0.060000] bio: create slab <bio-0> at 0
[ 0.068000] Switching to clocksource MIPS
[ 0.080000] NET: Registered protocol family 2
[ 0.080000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.080000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.080000] TCP: Hash tables configured (established 512 bind 512)
[ 0.080000] TCP: reno registered
[ 0.080000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.080000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.080000] NET: Registered protocol family 1
[ 0.080000] PCI: CLS 0 bytes, default 32
[ 0.084000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0)
[ 0.084000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0)
[ 0.084000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x05, class 0x0)
[ 0.084000] bcma: bus0: Core 5 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x02, class 0x0)
[ 0.084000] bcma: bus0: Core 6 found: I2S (manuf 0x4BF, id 0x834, rev 0x02, class 0x0)
[ 0.084000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x0B, class 0x0)
[ 0.600000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.600000] bcma: bus0: PMU resource config unknown or not needed for device 0x5357
[ 0.604000] bcma: bus0: Workarounds unknown or not needed for device 0x5357
[ 0.604000] bcma: bus0: Initializing MIPS core...
[ 0.604000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[ 0.604000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[ 0.604000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[ 0.604000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[ 0.604000] bcma: bus0: set_irq: core 0x0834, irq 2 => 2
[ 0.604000] bcma: bus0: IRQ reconfiguration done
[ 0.604000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I
[ 0.604000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I*
[ 0.604000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I
[ 0.604000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I
[ 0.604000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I
[ 0.604000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I
[ 0.604000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I
[ 0.604000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I*
[ 0.612000] bcma: bus0: Bus registered
[ 0.616000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.616000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.616000] msgmni has been set to 56
[ 0.616000] io scheduler noop registered
[ 0.616000] io scheduler deadline registered (default)
[ 0.616000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.640000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
[ 0.976000] console [ttyS0] enabled
[ 1.024000] 6 bcm47xxpart partitions found on MTD device bcm47xxsflash
[ 1.032000] Creating 6 MTD partitions on "bcm47xxsflash":
[ 1.036000] 0x000000000000-0x000000020000 : "boot"
[ 1.044000] 0x000000020000-0x0000007f0000 : "linux"
[ 1.056000] 0x00000002001c-0x000000020960 : "loader"
[ 1.064000] 0x000000020960-0x000000121000 : "kernel"
[ 1.068000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 1.084000] 0x000000121000-0x0000007f0000 : "rootfs"
[ 1.092000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 1.108000] mtd: partition "rootfs" set to be root filesystem
[ 1.112000] mtd: partition "rootfs_data" created automatically, ofs=0x610000, len=0x1e0000
[ 1.120000] 0x000000610000-0x0000007f0000 : "rootfs_data"
[ 1.132000] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.144000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 1.152000] GPIO_WDT: failed to register misc device
[ 1.160000] TCP: cubic registered
[ 1.164000] NET: Registered protocol family 17
[ 1.168000] 8021q: 802.1Q VLAN Support v1.8
[ 1.184000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.192000] Freeing unused kernel memory: 176K (802e4000 - 80310000)
[ 7.116000] diag: unknown board found, try legacy detect
[ 7.120000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.136000] diag: Router model not detected.
[ 7.152000] diag: unknown board found, try legacy detect
[ 7.156000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.172000] diag: Router model not detected.
[ 7.184000] pps_core: LinuxPPS API ver. 1 registered
[ 7.188000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@…>
[ 7.204000] diag: unknown board found, try legacy detect
[ 7.212000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.228000] diag: Router model not detected.
[ 7.240000] diag: unknown board found, try legacy detect
[ 7.244000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.264000] diag: Router model not detected.
[ 7.272000] PTP clock support registered
[ 7.284000] diag: unknown board found, try legacy detect
[ 7.288000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.304000] diag: Router model not detected.
[ 7.316000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
[ 7.332000] bgmac bcma0:1: Support for Roboswitch not implemented
[ 7.340000] libphy: bgmac mii bus: probed
[ 7.372000] b53_common: found switch: BCM5325, rev 4
[ 7.376000] (unregistered net_device): attached PHY driver [Broadcom B53 (2)] (mii_bus:phy_addr=bgmac-0-0:1e)
[ 7.392000] bgmac: Broadcom 47xx GBit MAC driver loaded
[ 7.404000] diag: unknown board found, try legacy detect
[ 7.412000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.428000] diag: Router model not detected.
[ 7.440000] diag: unknown board found, try legacy detect
[ 7.444000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.464000] diag: Router model not detected.
[ 7.492000] diag: unknown board found, try legacy detect
[ 7.496000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.512000] diag: Router model not detected.
[ 7.528000] diag: unknown board found, try legacy detect
[ 7.532000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.548000] diag: Router model not detected.
[ 7.560000] diag: unknown board found, try legacy detect
[ 7.568000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.584000] diag: Router model not detected.
[ 7.600000] diag: unknown board found, try legacy detect
[ 7.604000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.624000] diag: Router model not detected.
[ 7.636000] diag: unknown board found, try legacy detect
[ 7.640000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.656000] diag: Router model not detected.
[ 7.672000] diag: unknown board found, try legacy detect
[ 7.680000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.696000] diag: Router model not detected.
[ 7.708000] diag: unknown board found, try legacy detect
[ 7.712000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.732000] diag: Router model not detected.
[ 7.760000] usbcore: registered new interface driver usbfs
[ 7.764000] usbcore: registered new interface driver hub
[ 7.772000] usbcore: registered new device driver usb
[ 7.784000] diag: unknown board found, try legacy detect
[ 7.792000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.808000] diag: Router model not detected.
[ 7.820000] diag: unknown board found, try legacy detect
[ 7.828000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.844000] diag: Router model not detected.
[ 7.860000] diag: unknown board found, try legacy detect
[ 7.864000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.880000] diag: Router model not detected.
[ 7.896000] diag: unknown board found, try legacy detect
[ 7.900000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.916000] diag: Router model not detected.
[ 7.940000] diag: unknown board found, try legacy detect
[ 7.944000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 7.960000] diag: Router model not detected.
[ 7.976000] diag: unknown board found, try legacy detect
[ 7.984000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.000000] diag: Router model not detected.
[ 8.052000] diag: unknown board found, try legacy detect
[ 8.056000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.072000] diag: Router model not detected.
[ 8.088000] diag: unknown board found, try legacy detect
[ 8.092000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.108000] diag: Router model not detected.
[ 8.136000] SCSI subsystem initialized
[ 8.156000] diag: unknown board found, try legacy detect
[ 8.160000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.176000] diag: Router model not detected.
[ 8.192000] diag: unknown board found, try legacy detect
[ 8.196000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.212000] diag: Router model not detected.
[ 8.224000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.236000] diag: unknown board found, try legacy detect
[ 8.244000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.260000] diag: Router model not detected.
[ 8.272000] diag: unknown board found, try legacy detect
[ 8.280000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.296000] diag: Router model not detected.
[ 8.304000] ehci-platform: EHCI generic platform driver
[ 8.308000] ehci-platform ehci-platform.0: EHCI Host Controller
[ 8.316000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 8.324000] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000
[ 8.344000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
[ 8.352000] hub 1-0:1.0: USB hub found
[ 8.356000] hub 1-0:1.0: 2 ports detected
[ 8.368000] diag: unknown board found, try legacy detect
[ 8.376000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.392000] diag: Router model not detected.
[ 8.404000] diag: unknown board found, try legacy detect
[ 8.408000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.428000] diag: Router model not detected.
[ 8.436000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.444000] ohci-platform ohci-platform.0: Generic Platform OHCI Controller
[ 8.448000] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[ 8.460000] ohci-platform ohci-platform.0: irq 5, io mem 0x18009000
[ 8.524000] hub 2-0:1.0: USB hub found
[ 8.528000] hub 2-0:1.0: 2 ports detected
[ 8.544000] diag: unknown board found, try legacy detect
[ 8.548000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.564000] diag: Router model not detected.
[ 8.580000] diag: unknown board found, try legacy detect
[ 8.584000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.600000] diag: Router model not detected.
[ 8.616000] usbcore: registered new interface driver usb-storage
[ 8.628000] diag: unknown board found, try legacy detect
[ 8.636000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 8.652000] diag: Router model not detected.
[ 18.212000] diag: unknown board found, try legacy detect
[ 18.220000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.236000] diag: Router model not detected.
[ 18.252000] diag: unknown board found, try legacy detect
[ 18.260000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.276000] diag: Router model not detected.
[ 18.292000] diag: unknown board found, try legacy detect
[ 18.300000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.316000] diag: Router model not detected.
[ 18.328000] diag: unknown board found, try legacy detect
[ 18.336000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.352000] diag: Router model not detected.
[ 18.368000] diag: unknown board found, try legacy detect
[ 18.372000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.388000] diag: Router model not detected.
[ 18.408000] diag: unknown board found, try legacy detect
[ 18.412000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.428000] diag: Router model not detected.
[ 18.444000] diag: unknown board found, try legacy detect
[ 18.448000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.464000] diag: Router model not detected.
[ 18.480000] zram: Created 1 device(s) ...
[ 18.496000] diag: unknown board found, try legacy detect
[ 18.500000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.516000] diag: Router model not detected.
[ 18.556000] diag: unknown board found, try legacy detect
[ 18.560000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.576000] diag: Router model not detected.
[ 18.600000] diag: unknown board found, try legacy detect
[ 18.604000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.620000] diag: Router model not detected.
[ 18.644000] diag: unknown board found, try legacy detect
[ 18.648000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.664000] diag: Router model not detected.
[ 18.680000] diag: unknown board found, try legacy detect
[ 18.688000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.704000] diag: Router model not detected.
[ 18.720000] diag: unknown board found, try legacy detect
[ 18.724000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.740000] diag: Router model not detected.
[ 18.756000] diag: unknown board found, try legacy detect
[ 18.764000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.780000] diag: Router model not detected.
[ 18.796000] diag: unknown board found, try legacy detect
[ 18.800000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.816000] diag: Router model not detected.
[ 18.832000] diag: unknown board found, try legacy detect
[ 18.840000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.856000] diag: Router model not detected.
[ 18.872000] diag: unknown board found, try legacy detect
[ 18.876000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 18.892000] diag: Router model not detected.
[ 19.872000] wl: module license 'unspecified' taints kernel.
[ 19.876000] Disabling lock debugging due to kernel taint
[ 20.024000] wl0: 5.10.56.27 driver failed with code 13
[ 20.028000] The attach callback failed, BCMA probe aborted
[ 20.036000] SSB/BCMA glue driver successfully attached
[ 20.052000] diag: unknown board found, try legacy detect
[ 20.056000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.076000] diag: Router model not detected.
[ 20.088000] diag: unknown board found, try legacy detect
[ 20.092000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.112000] diag: Router model not detected.
[ 20.128000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 20.144000] diag: unknown board found, try legacy detect
[ 20.152000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.168000] diag: Router model not detected.
[ 20.180000] diag: unknown board found, try legacy detect
[ 20.188000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.204000] diag: Router model not detected.
[ 20.228000] diag: unknown board found, try legacy detect
[ 20.232000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.248000] diag: Router model not detected.
[ 20.264000] diag: unknown board found, try legacy detect
[ 20.268000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.284000] diag: Router model not detected.
[ 20.304000] diag: unknown board found, try legacy detect
[ 20.308000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.328000] diag: Router model not detected.
[ 20.336000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 20.344000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 20.364000] diag: unknown board found, try legacy detect
[ 20.372000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.388000] diag: Router model not detected.
[ 20.408000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
[ 20.484000] xt_time: kernel timezone is -0000
[ 20.528000] cfg80211: Calling CRDA to update world regulatory domain
[ 20.548000] cfg80211: World regulatory domain updated:
[ 20.552000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.564000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.572000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.580000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.588000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.596000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.608000] diag: unknown board found, try legacy detect
[ 20.612000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.628000] diag: Router model not detected.
[ 20.664000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.800000] PPP generic driver version 2.4.2
[ 20.808000] NET: Registered protocol family 24
[ 20.836000] Broadcom 43xx driver loaded [ Features: PL ]
[ 20.848000] diag: unknown board found, try legacy detect
[ 20.856000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.872000] diag: Router model not detected.
[ 20.896000] diag: unknown board found, try legacy detect
[ 20.904000] diag: please open a ticket at dev.openwrt.org and attach the complete nvram
[ 20.920000] diag: Router model not detected.
[ 25.020000] Adding 14332k swap on /dev/zram0. Priority:-1 extents:1 across:14332k SS
[ 27.588000] device eth0.1 entered promiscuous mode
[ 27.596000] device eth0 entered promiscuous mode
[ 27.616000] br-lan: port 1(eth0.1) entered forwarding state
[ 27.620000] br-lan: port 1(eth0.1) entered forwarding state
[ 29.624000] br-lan: port 1(eth0.1) entered forwarding state
[ 43.804000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 43.816000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 43.820000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 52.452000] jffs2: notice: (910) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Attachments (2)

nvram_info (318 bytes) - added by i.nizametdinov@… 3 years ago.
NVRAM Info
nvram_show (26.2 KB) - added by ilnaz 3 years ago.
NVRAM Show

Download all attachments as: .zip

Change History (13)

Changed 3 years ago by i.nizametdinov@…

NVRAM Info

Changed 3 years ago by ilnaz

NVRAM Show

comment:1 Changed 3 years ago by hauke

  • Owner changed from developers to hauke
  • Status changed from new to accepted

comment:2 Changed 3 years ago by hauke

  • Resolution set to wontfix
  • Status changed from accepted to closed

The wifi PHY used in this device is not supported by b43, brcmsmac or broadcom-wl, if support for that PHY was added we can add support for the wifi of this chip to OpenWrt. For now just the board detection was fixed in r38383.

comment:3 Changed 17 months ago by anonymous

for this wifi chip - the brcmfmac is working!

comment:4 Changed 17 months ago by hauke

have you tried brcmfmac?

brcmfamc only support some fullmac wifi devices, the BCM5357 used in the RT-N10U has a softmac wifi chip.

comment:5 Changed 13 months ago by bodka.zavinac@…

support for bcm53xx in CCrc1 means e.g. asus rt n10u is gonna get fully supported now? i guess it should.. or? ty

comment:6 Changed 13 months ago by hauke

No, the bcm53xx target is for the ARM based BCM47xx and BCM53XX chips and there are the same wifi problems. The fullmac 80211ac chips are supported by brcmfmac and OpenWrt will support them to, but currently no one is working on the wifi part of the BCM5357.

comment:7 Changed 11 months ago by anonymous

ASUS released the source code for this model (and others):
https://www.asus.com/Networking/RTN10U_B/HelpDesk_Download/

comment:8 Changed 11 months ago by anonymous

please, reopen the ticket

comment:9 Changed 11 months ago by jlgarcia55@…

  • Resolution wontfix deleted
  • Status changed from closed to reopened

comment:10 Changed 11 months ago by hauke

  • Resolution set to wontfix
  • Status changed from reopened to closed

I could not find any source code for a Broadcom wifi driver in there just some binary blobs of the wifi driver and some code probably for the userspace utile with this header: "This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;" Next time please check if there is also source code for the wifi driver under a GPL compatible license in there.

comment:11 Changed 11 months ago by anonymous

no source code

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.