acx111 hangs on firmware load on WAG345G
|Reported by:||aschultz@…||Owned by:||ejka|
starting the acx driver on an WAG354G hangs the box (svn current)
Last output line:
acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them running on a little-endian CPU PCI module v0.3.36 initialized, waiting for cards to probe... PCI: Enabling device 0000:00:00.0 (0000 -> 0002) acx: found ACX111-based wireless network card at 0000:00:00.0, irq:80, phymem1:0x4000000, phymem2:0x4022000, mem1:0xa4000000, mem1_size:8192, mem2:0xa4022000,2 initial debug setting is 0x000A using IRQ 80 vlynq0: Read of unknown register 0x38 (size 4) acx: need to load firmware for acxx11 chipset with radio ID 16, please provide via firmware hotplug: acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separaae <r>adio-specific extension) requesting firmware image 'tiacx111c16'
Change History (5)
comment:3 Changed 10 years ago by ejka
- Owner changed from developers to ejka
- Status changed from new to assigned
comment:4 Changed 10 years ago by florian
- Resolution set to wontfix
- Status changed from assigned to closed
Note: See TracTickets for help on using tickets.