Opened 10 years ago

Closed 10 years ago

Last modified 3 years ago

#2437 closed defect (wontfix)

CONFIG_USB_OHCI_HCD_SSB disabled for brcm47xx-2.6

Reported by: floe@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version:
Keywords: Cc:


I found that CONFIG_USB_OHCI_HCD_SSB is disabled by default. I guess it should be enabled for brcm47xx-2.6..

Attachments (0)

Change History (5)

comment:1 follow-up: Changed 10 years ago by florian

  • Resolution set to wontfix
  • Status changed from new to closed

Not necessarily because most broadcom devices uses an external OHCI controller. This driver is just there in case someones designs a board which uses the on-chip OHCI HCD.

comment:2 Changed 10 years ago by floe@…

There is such a board - the US Robotics 5461 uses the internal HCD.
So what would be the recommended solution for this?

comment:3 Changed 8 years ago by slx

There are more devices with USB controller on SSB bus like: Siemens SE505, Asus WL-500g, Asus WL-520gU, Belkin F5D7231-4P. Users of these devices somtimes ask on forum about not working USB with 2.6 kernel.
Please enable by default CONFIG_USB_OHCI_HCD_SSB.

comment:4 in reply to: ↑ 1 Changed 8 years ago by edo <edo.rus@…>

Replying to florian:

Not necessarily because most broadcom devices uses an external OHCI controller.

any example?
asus wl-500gP v1 use external UHCI controller, wl-500gP v2, wl-520gU, d-link dir-320 use internel OHCI controller.

thanks for hauke, CONFIG_USB_OHCI_HCD_SSB is now enabled by default:

ps: i think it don't break anything for devices with external OHCI controller

comment:5 Changed 3 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.