Modify

Opened 8 years ago

Closed 8 years ago

Last modified 3 years ago

#3546 closed defect (worksforme)

madwifi Hardware revision not supported (HAL status 13)

Reported by: flo@… Owned by: developers
Priority: normal Milestone: Kamikaze 7.09
Component: packages Version:
Keywords: atheros madwifi HP J9141A Cc:

Description

On an HP J9141A Accesspoint (Dual radio 802.11/a/b/g) i get this after tweaking the kernel a bit
to provide a decent mtd map (AR5312 based but u-boot instead of redboot).

wlan: 0.8.4.2 (svn r2568)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5212, AR5312, RF2316, TX_DESC_SWAP)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r2568)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
wlan: mac acl policy registered
ath_ahb: 0.9.4.5 (svn r2568)
MadWifi: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
MadWifi: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)

The original firmware the AP gets shipped with is also Kamikaze based (says r0 on boot) and reports:

Warning: loading ath_hal will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
ath_hal: 0.9.17.1 (AR5212, AR5312, RF5111, RF5112, RF2413, RF5413, TX_DESC_SWAP)
wlan: 0.8.4.2 (Atheros/multi-bss)
Warning: loading ath_rate_atheros will taint theath_rate_atheros: Version 2.0.1
 kernel: non-GPLCopyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserd
 license - Proprietary[
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules[
insmod: ath_dfs.o: no module by that name found
ath_ahb: 0.9.4.5 (Atheros/multi-bss)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps s
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 5.7 phy 4.2 radio 3.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5312 WiSoC: mem=0xb8000000, irq=2
wifi1: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi1: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps s
wifi1: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi1: mac 5.7 phy 4.2 radio 4.6
wifi1: Use hw queue 1 for WME_AC_BE traffic
wifi1: Use hw queue 0 for WME_AC_BK traffic
wifi1: Use hw queue 2 for WME_AC_VI traffic
wifi1: Use hw queue 3 for WME_AC_VO traffic
wifi1: Use hw queue 8 for CAB traffic
wifi1: Use hw queue 9 for beacons
wifi1: Atheros 5312 WiSoC: mem=0xb8500000, irq=5

Attachments (0)

Change History (1)

comment:1 Changed 8 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

should be working in trunk with the new hal

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.