Modify

Opened 8 years ago

Closed 6 years ago

Last modified 2 years ago

#4213 closed defect (obsolete)

Ethernet works only in promisc mode on Fonera 2202

Reported by: openwrt at frithjof-hammer.de Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version:
Keywords: Cc:

Description

After flashing my fonera 2202 with kamikaze 8.09rc1 the networkports are not working anymore (they did under the orgininal fon-openwrt). Only the WAN port is usable, if I put it into the promiscous mode:

promisc off: (the interface recieves nothing)

eth0.1    Link encap:Ethernet  HWaddr 00:18:84:D0:0B:88
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:1206 (1.1 KiB)

promisc on: (interface recieves and is usable)

root@OpenWrt:/# ifconfig eth0.1 promisc
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
root@OpenWrt:/# ifconfig eth0.1
eth0.1    Link encap:Ethernet  HWaddr 00:18:84:D0:0B:88
          inet addr:192.168.3.124  Bcast:192.168.3.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:30 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:26304 (25.6 KiB)  TX bytes:25334 (24.7 KiB)


iptables policies are set to accept, there are no rules defined.

Attachments (0)

Change History (5)

comment:1 follow-up: Changed 8 years ago by dmanso

I'm using snapshot r13117 (4-Nov) and Internet and Computer ports work correctly.

comment:2 in reply to: ↑ 1 Changed 8 years ago by anonymous

Replying to dmanso:

I'm using snapshot r13117 (4-Nov) and Internet and Computer ports work correctly.

I've tested trunk r13223 and can confirm, that wan is now working even if the interface is not in promiscous mode.

The lan interface -however- isn't working. Even the LED did not light up. Since I flashed the device over the ethernet port, i am sure that there was a time, the interface worked. But since i can not get into the bootloader via the LAN-ethernet port, it may be possible that the port has a hardware defect.

comment:3 Changed 8 years ago by xkennyx@…

Hi, I think I have the same problem. But on amd5120 (r13208) DHCP work ok, WAN look is ok (dhcp+dns+ping test) , but tcp/ip on lan ports does not work. Only few packets of icmp-ping I was able to catch by wireshark.

comment:4 Changed 6 years ago by thepeople

  • Resolution set to obsolete
  • Status changed from new to closed

[patchteam] This seems obsolete, if it is still an issue please submit a new ticket.

comment:5 Changed 2 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.