Modify

Opened 7 years ago

Closed 3 years ago

Last modified 2 years ago

#6543 closed enhancement (fixed)

Asterisk-GUI

Reported by: KadettGTE Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Kamikaze 8.09
Keywords: asterisk gui Cc: devil@…

Description

i've built a Asterisk-GUI package (from SVN) for openwrt, and it works here (haven't tested everything though)

All the files are below as well as the ipk for x86

Attachments (7)

asterisk-gui-buildroot-package.tar.gz (1.6 KB) - added by KadettGTE 7 years ago.
place into packages/ dir
asterisk-gui_svn_i386.ipk (476.7 KB) - added by KadettGTE 7 years ago.
x86 ipkg package
asterisk-gui.tar.gz (4.0 KB) - added by KadettGTE 7 years ago.
New buildroot Package with new makefile to use SVN and postinst scripts
asterisk-gui.tar.2.gz (4.2 KB) - added by KadettGTE 6 years ago.
Latest makefile
asterisk-gui_svn-r5117_x86.ipk (485.3 KB) - added by KadettGTE 6 years ago.
latest binary x86 ipkg
asterisk-gui.tar.3.gz (10.0 KB) - added by KadettGTE <tperalta82@…> 4 years ago.
latest buildroot package
asterisk-gui_svn-rHEAD_x86.ipk (488.7 KB) - added by KadettGTE <tperalta82@…> 4 years ago.
Latest x86 binary working on asterisk 1.8

Download all attachments as: .zip

Change History (29)

Changed 7 years ago by KadettGTE

place into packages/ dir

Changed 7 years ago by KadettGTE

x86 ipkg package

comment:1 Changed 7 years ago by KadettGTE

i had to upload the source file to http://www.clubeopel.com/asterisk-gui-svn.tgz because i couldn't upload it here.

after installing the package just do this:

mv /etc/asterisk/httpgui.conf /etc/asterisk/http.conf;
mv /etc/asterisk/managergui.conf /etc/asterisk/manager.conf;

edit the files to suit your preferences

then edit /etc/asterisk/modules.conf and comment the noload=>app_system.so

startup asterisk and then on your browser:
http://openwrtip:8088/asterisk/static/config/index.html

comment:2 in reply to: ↑ description ; follow-up: Changed 7 years ago by radu2000v@…

Replying to KadettGTE:

i've built a Asterisk-GUI package (from SVN) for openwrt, and it works here (haven't tested everything though)

All the files are below as well as the ipk for x86

how to compile for other CPU (Broadcom 5352) ?

thank you

comment:3 Changed 7 years ago by KadettGTE

Makefile rewritten to use digium's SVN, and added a postinstall in order to replace asterisk's original http/manager/modules.conf files

Changed 7 years ago by KadettGTE

New buildroot Package with new makefile to use SVN and postinst scripts

comment:4 in reply to: ↑ 2 ; follow-up: Changed 7 years ago by KadettGTE

I've already replied you @the forum
Replying to radu2000v@…:

Replying to KadettGTE:

i've built a Asterisk-GUI package (from SVN) for openwrt, and it works here (haven't tested everything though)

All the files are below as well as the ipk for x86

how to compile for other CPU (Broadcom 5352) ?

thank you

comment:5 in reply to: ↑ 4 Changed 6 years ago by KadettGTE

follow the same instructions to build for x86 and it'll work, the package does not contain any executable file, it's just html+javascript that communicates with the asterisk webmanager.

Replying to KadettGTE:

I've already replied you @the forum
Replying to radu2000v@…:

Replying to KadettGTE:

i've built a Asterisk-GUI package (from SVN) for openwrt, and it works here (haven't tested everything though)

All the files are below as well as the ipk for x86

how to compile for other CPU (Broadcom 5352) ?

thank you

Changed 6 years ago by KadettGTE

Latest makefile

comment:6 Changed 6 years ago by KadettGTE

Updated to use asterisk 1.6 from latest backfire

Added a init script to symlink /usr/lib/asterisk to /var/lib/asterisk

Modified package dependencies

Not thoroughly tested because i did not have the time

after installing go to

routerip:8088/static/config/index.html

Changed 6 years ago by KadettGTE

latest binary x86 ipkg

comment:7 Changed 6 years ago by candrews@…

There's a packaging effort for Asterisk 1.8 over at #8132 - perhaps Asterisk GUI should be developed to work with it?

comment:8 follow-up: Changed 6 years ago by KadettGTE

will check it as soon as i have some Free Time :)

comment:9 Changed 4 years ago by florian

  • Resolution set to wontfix
  • Status changed from new to closed

Please reupdate your package so that it works with asterisk-1.8.

comment:10 in reply to: ↑ 8 Changed 4 years ago by dreamup <marco@…>

Replying to KadettGTE:

will check it as soon as i have some Free Time :)

Hi, are you going to maintain Asterisk Gui Package?
Thanks for your job.

comment:11 Changed 4 years ago by KadettGTE <tperalta82@…>

  • Resolution wontfix deleted
  • Status changed from closed to reopened

Yep, picking it up at the moment, going to take a while though

Changed 4 years ago by KadettGTE <tperalta82@…>

latest buildroot package

Changed 4 years ago by KadettGTE <tperalta82@…>

Latest x86 binary working on asterisk 1.8

comment:12 Changed 4 years ago by KadettGTE <tperalta82@…>

Just attached both source package, and binary file.

After installing the binary file, make sure to either enable /etc/init.d/asterisk-gui at start, or just start it before asterisk

default user and pass is admin/admin

location: http://openwrtip:8088/static/config/index.html

Please test it. I've just tested basic usage with no problems.

Best Regards

KadettGTE

comment:13 Changed 3 years ago by sim140680@…

Hello,
I'm trying your bouildroot package (buitd it for AR71xx) i cross compiled, with asterisk 1.8.14.0.
Asterisk is OK, i installed the asterisk-gui, followed your instructions.
I tried http://openwrtip:8088/static/config/index.html and only hav the digium logo on the page, could you help me?
Thank's in advance
Simon

comment:14 Changed 3 years ago by KadettGTE <tperalta82@…>

I am currently out of my country (where i have my buildroot and stuff)

I will check it next monday, right now i don't remember the paths, but can you check if the symlinks created by /etc/init.d/asterisk-gui exist?

comment:15 Changed 3 years ago by sim140680@…

Here is my custom-startup file in /etc/init.d/

export PATH='/bin:/sbin:/usr/bin:/usr/sbin:/mnt/usb/bin:/mnt/usb/sbin:/mnt/usb/usr/bin:/mnt/usb/usr/sbin'
export LD_LIBRARY_PATH='/lib:/usr/lib:/mnt/usb/lib:/mnt/usb/usr/lib'

/mnt/usb/etc/init.d/asterisk-gui start
/mnt/usb/etc/init.d/asterisk start&

I run my asterisk from usb drive on /mnt/usb

comment:16 Changed 3 years ago by Tiago Peralta <tperalta82@…>

You have integrated the package within the image, or installed it later manually?

comment:17 Changed 3 years ago by Tiago Peralta <tperalta82@…>

And i have just noticed, this may be a path related issue, i built this to be run from / not from /mnt/usb/, as everytime it boots it has to setup symlinks.

your /mnt/usb is on what kind of filesystem so i can try rebuild the package with a custom mountpoint option

comment:18 Changed 3 years ago by sim140680@…

Hello,
My astersik is running fron USB on a Netgear WNDR3800. I used this guide to do it: https://wiki.koumbit.net/Asterisk18SurOpenWRT (sorry in french)
I tried to install it from / ou fron /mnt/usb with no luck, have you some advices?

comment:19 Changed 3 years ago by tperalta82@…

Hi, still i have no USB stuff yet, i haven't had the time, i'll get a thumb drive someday this week and will continue testing

comment:20 Changed 3 years ago by slachta@…

Hello everyone,

I have recently pushed asterisk-gui for asterisk 11.x package to telephony repository (current trunk). After asterisk11-gui installation just reload asterisk11 and it's there. I'll do the same for asterisk18, there are some changes to be done for asterisk18 package before it has been published.

Jiri

comment:21 Changed 3 years ago by jogo

  • Resolution set to fixed
  • Status changed from reopened to closed

comment:22 Changed 2 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.