Modify

Opened 7 years ago

Closed 5 years ago

#7120 closed defect (wontfix)

Backfire 10.3 does not compile image for AGPF

Reported by: ramponis <ramponis@…> Owned by: cshore
Priority: normal Milestone: Backfire 10.03.1
Component: other Version: Backfire 10.03
Keywords: Cc:

Description

Tried to compile Backfire 10.3 from source.
It does not compile image for Alice Gate Voip 2 Plus Wi-Fi.
The image openwrt-AGPF-S0-jffs2-128k-agv2+w-cfe.bin is missing

Attachments (0)

Change History (11)

comment:1 Changed 7 years ago by florian

  • Resolution set to worksforme
  • Status changed from new to closed

comment:2 Changed 7 years ago by ramponis <ramponis@…>

  • Resolution worksforme deleted
  • Status changed from closed to reopened

I have tried the linked version and it is 10.03-rc3
It was copied from http://downloads.openwrt.org/backfire/10.03-rc3/brcm63xx/openwrt-AGPF-S0-squashfs-agv2+w-cfe.bin not compiled from 10.03 source.
I download againg the source and tried to compile.
Same result: image not compiled

Please check it

comment:3 Changed 7 years ago by nico

  • Component changed from toolchain to other
  • Milestone changed from Backfire 10.03.1 to Backfire 10.03
  • Resolution set to worksforme
  • Status changed from reopened to closed
  • Version changed from Trunk to Backfire 10.03

Images for Alice Gate Voip 2 Plus Wi-Fi are now named openwrt-AGV2+W-*. Previous 10.03-rc3 images will be deleted soon, sorry for the confusion.

comment:4 Changed 7 years ago by ramponis <ramponis@…>

  • Resolution worksforme deleted
  • Status changed from closed to reopened

All images openwrt-AGV2+W-* did not work on Alice Gate Voip 2 Plus Wi-Fi

I have tested:

openwrt-AGV2+W-cfe-jffs2-128k-cfe.bin
openwrt-AGV2+W-cfe-jffs2-64k-cfe.bin
openwrt-AGV2+W-cfe-squashfs-cfe.bin
openwrt-AGV2+W-jffs2-128k-cfe.bin
openwrt-AGV2+W-jffs2-64k-cfe.bin
openwrt-AGV2+W-squashfs-cfe.bin

Downloaded from http://downloads.openwrt.org/backfire/10.03/brcm63xx/

And also the images compiled by me from source

The result is the same!
This is the router serial output:

CFE version 1.0.37-8.7 for AGPF 0007 BCM96358 (32bit,SP,BE)
Build Date: lun giu 16 10:47:46 CEST 2008 ( gpaolo@buildserver )
Copyright (C) 2000-2005 Broadcom Corporation.

Boot Address 0xbe000000

Initializing Arena.
Initializing Devices.

Flash info:
device_id : ............227E
meminfo.nsect:..........128
totalSize:..............1000000
num_erase_blocks:...... 1
device_size:............1000000

Parallel flash device: name MX29L128DT, id 0x227e, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)

Total memory used by CFE: 0x80401000 - 0x80528CB0 (1211568)
Initialized Data: 0x8041E8A0 - 0x804204C0 (7200)
BSS Area: 0x804204C0 - 0x80426CB0 (26608)
Local Heap: 0x80426CB0 - 0x80526CB0 (1048576)
Stack Area: 0x80526CB0 - 0x80528CB0 (8192)
Text (code) segment: 0x80401000 - 0x8041E894 (120980)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : openrg.img
Boot delay (0-9 seconds) : 1
Board Id (0-3) : AGPF-S0
Number of MAC Addresses (1-32) : 13
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Main Thread Number [0|1] : 0

* Press any key to stop auto run (1 seconds) *
Auto run second count down: 0
Sizeof Tag Used : 256
One only valid image tag found ...
Trying to boot from FIRST image copy (0x80010000) ...

latest imageSequence found: ... 0

  • Flash Kernel Address: 0xBE020100
  • Tag->kernelLen: 0x000DFF00
  • Flash Kernel Address: 0xBE020100

Linux kernel CRC error. Corrupted image?

  • Tag Kernel crc : 0x617DDC65 - calculated: 0x709E1A4D

The images from the 10.03 RC3 work correctly

comment:5 Changed 7 years ago by cshore

  • Owner changed from developers to cshore
  • Status changed from reopened to accepted

comment:6 Changed 7 years ago by nico

  • Resolution set to fixed
  • Status changed from accepted to closed

Fixed in [20850] & [20851]

comment:7 Changed 7 years ago by ramponis <ramponis@…>

Ok now it works.

Thank you

comment:8 Changed 7 years ago by nico

  • Milestone changed from Backfire 10.03 to Backfire 10.03.1

comment:9 Changed 7 years ago by GaLFrieD^^

Thank you for more info ... can you pubblic the firmware work on Alice Gate Voip 2 Plus Wi-Fi ????

Tnx

comment:10 Changed 5 years ago by krono

  • Resolution fixed deleted
  • Status changed from closed to reopened

Hi guys,
can you post .config of openwrt-AGV2+W-cfe-jffs2-128k-cfe.bin?
I want to compile imege with broadcom proprietary driver.
Thanks.

comment:11 Changed 5 years ago by florian

  • Resolution set to wontfix
  • Status changed from reopened to closed

This is not a support forum, so please compile your own backfire image with the proprietary broadcom drivers.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.