Modify

Opened 6 years ago

Closed 6 years ago

Last modified 2 years ago

#7528 closed enhancement (fixed)

Add TP-Link TL-WA901ND support to OpenWrt

Reported by: Pieter "Fate" Hollants <pieter@…> Owned by: juhosg
Priority: normal Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: tp-link wa901nd Cc:

Description

The attached patch (together with #7526 for mktplinkfw) adds support for the TP-Link TP-WA901ND access point to OpenWrt.

Attachments (3)

7528-wa901nd_support.diff (9.4 KB) - added by Pieter "Fate" Hollants <pieter@…> 6 years ago.
Patch to add TL-WA901ND support to OpenWrt
7528-wa901nd_support_2.diff (650 bytes) - added by Pieter "Fate" Hollants <pieter@…> 6 years ago.
Patch to add missing default config for /etc/config/network
7528-wa901nd_support_3.diff (11.3 KB) - added by Pieter "Fate" Hollants <pieter@…> 6 years ago.
Slightly revised version of the patches, taking into account juhosg's comments

Download all attachments as: .zip

Change History (6)

Changed 6 years ago by Pieter "Fate" Hollants <pieter@…>

Patch to add TL-WA901ND support to OpenWrt

Changed 6 years ago by Pieter "Fate" Hollants <pieter@…>

Patch to add missing default config for /etc/config/network

comment:1 Changed 6 years ago by juhosg

  • Milestone changed from Backfire 10.03.1 to Kamikaze
  • Owner changed from developers to juhosg
  • Status changed from new to accepted
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile	(Revision 21987)
+++ target/linux/ar71xx/image/Makefile	(Arbeitskopie)
@@ -517,6 +517,10 @@
 	$(call Image/Build/Template/$(fs_64k)/$(1),Planex,mzk-w300nh,board=MZK-W300NH)
 endef
 
+define Image/Build/Profile/TLWA901NDV1
+	$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wa901nd-v1,board=TL-WA901ND,TL-WA901NDv1)
+endef
+
 define Image/Build/Profile/TLWR741NDV1
 	$(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-wr741nd-v1,board=TL-WR741ND,TL-WR741NDv1)
 endef
@@ -585,6 +589,7 @@
 	$(call Image/Build/Profile/PB92,$(1))
 	$(call Image/Build/Profile/TEW632BRP,$(1))
 	$(call Image/Build/Profile/TEW652BRP,$(1))
+	$(call Image/Build/Profile/TLWA901NDV1,$(1))
 	$(call Image/Build/Profile/TLWR741NDV1,$(1))
 	$(call Image/Build/Profile/TLWR841NV15,$(1))
 	$(call Image/Build/Profile/TLWR841NDV3,$(1))
Index: target/linux/ar71xx/config-2.6.32
===================================================================
--- target/linux/ar71xx/config-2.6.32	(Revision 21987)
+++ target/linux/ar71xx/config-2.6.32	(Arbeitskopie)
@@ -33,6 +33,7 @@
 CONFIG_AR71XX_MACH_RB4XX=y
 CONFIG_AR71XX_MACH_RB750=y
 CONFIG_AR71XX_MACH_TEW_632BRP=y
+CONFIG_AR71XX_MACH_TL_WA901ND=y
 CONFIG_AR71XX_MACH_TL_WR1043ND=y
 CONFIG_AR71XX_MACH_TL_WR741ND=y
 CONFIG_AR71XX_MACH_TL_WR841N_V1=y
Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c	(Revision 0)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c	(Revision 0)
@@ -0,0 +1,150 @@
+/*
+ *  TP-LINK TL-WA901ND board support
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-dsa.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define TL_WA901ND_GPIO_LED_QSS		0
+#define TL_WA901ND_GPIO_LED_SYSTEM	1
+
+#define TL_WA901ND_GPIO_BTN_RESET	11
+#define TL_WA901ND_GPIO_BTN_QSS		12
+
+#define TL_WA901ND_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wa901nd_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x290000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x3d0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wa901nd_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wa901nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wa901nd:green:system",
+		.gpio		= TL_WA901ND_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wa901nd:green:qss",
+		.gpio		= TL_WA901ND_GPIO_LED_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tl_wa901nd_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= TL_WA901ND_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= TL_WA901ND_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct dsa_chip_data tl_wa901nd_v1_dsa_chip = {
+	.port_names[0]  = "cpu",
+	.port_names[1]  = "lan",
+};
+
+static struct dsa_platform_data tl_wa901nd_v1_dsa_data = {
+	.nr_chips	= 1,
+	.chip		= &tl_wa901nd_v1_dsa_chip,
+};
+
+static void __init tl_wa901nd_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	/* ar71xx_eth0 is be the WAN port, but it is not connected on
+	   the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
+	   even though we have a single Ethernet port only */

Please use Linux's coding-style for the comment. Additionally, if this device does not use the ag71xx_eth0 device, you don't need to initialize and register that.

+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+	ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+	ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_dsa(1, &tl_wa901nd_v1_dsa_data);
+
+	ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+					tl_wa901nd_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wa901nd_gpio_buttons),
+					tl_wa901nd_gpio_buttons);
+
+	ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
+	     tl_wa901nd_setup);
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Makefile	(Revision 21987)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Makefile	(Arbeitskopie)
@@ -43,6 +43,7 @@
 obj-$(CONFIG_AR71XX_MACH_RB4XX)		+= mach-rb4xx.o
 obj-$(CONFIG_AR71XX_MACH_RB750)		+= mach-rb750.o
 obj-$(CONFIG_AR71XX_MACH_TEW_632BRP)	+= mach-tew-632brp.o
+obj-$(CONFIG_AR71XX_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o

Please add this to config-2.6.3[345] as well.

 obj-$(CONFIG_AR71XX_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
 obj-$(CONFIG_AR71XX_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
Index: target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h	(Revision 21987)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h	(Arbeitskopie)
@@ -37,6 +37,7 @@
 	AR71XX_MACH_MZK_W300NH,	/* Planex MZK-W300NH */
 	AR71XX_MACH_NBG460N,	/* Zyxel NBG460N/550N/550NH */
 	AR71XX_MACH_TEW_632BRP,	/* TRENDnet TEW-632BRP */
+	AR71XX_MACH_TL_WA901ND,	/* TP-LINK TL-WA901ND */
 	AR71XX_MACH_TL_WR741ND,	/* TP-LINK TL-WR741ND */
 	AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
 	AR71XX_MACH_TL_WR941ND,	/* TP-LINK TL-WR941ND */
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig	(Revision 21987)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig	(Arbeitskopie)
@@ -167,6 +167,16 @@
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	default n
+
+config AR71XX_MACH_TL_WA901ND
+	bool "TP-LINK TL-WA901ND support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP91_ETH
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_DSA
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
 	
 config AR71XX_MACH_TL_WR741ND
 	bool "TP-LINK TL-WR741ND support"
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh	(Revision 21987)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh	(Arbeitskopie)
@@ -91,6 +91,9 @@
 	*"DIR-615 rev. C1")
 		name="dir-615-c1"
 		;;
+	*TL-WA901ND)
+		name="tl-wa901nd"
+		;;
 	*TL-WR741ND)
 		name="tl-wr741nd"
 		;;
Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/upgrade/platform.sh	(Revision 21987)
+++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh	(Arbeitskopie)
@@ -75,7 +75,7 @@
 		}
 		return 0
 		;;
-	tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
+	tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd)
 		[ "$magic" != "0100" ] && {
 			echo "Invalid image type."
 			return 1
Index: target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- target/linux/ar71xx/base-files/etc/diag.sh	(Revision 21987)
+++ target/linux/ar71xx/base-files/etc/diag.sh	(Arbeitskopie)
@@ -72,6 +72,9 @@
 	tew-632brp)
 		status_led="tew-632brp:green:status"
 		;;
+	tl-wa901nd)
+		status_led="tl-wa901nd:green:system"
+		;;
 	tl-wr1043nd)
 		status_led="tl-wr1043nd:green:system"
 		;;
Index: target/linux/ar71xx/generic/profiles/tp-link.mk
===================================================================
--- target/linux/ar71xx/generic/profiles/tp-link.mk	(Revision 21987)
+++ target/linux/ar71xx/generic/profiles/tp-link.mk	(Arbeitskopie)
@@ -5,6 +5,17 @@
 # See /LICENSE for more information.
 #
 
+define Profile/TLWA901NDV1
+	NAME:=TP-LINK TL-WA901ND v1
+	PACKAGES:=kmod-ath9k wpad-mini
+endef
+
+define Profile/TLWA901NDV1/Description
+	Package set optimized for the TP-LINK TL-WA901ND v1.
+endef
+
+$(eval $(call Profile,TLWA901NDV1))
+
 define Profile/TLWR741NDV1
 	NAME:=TP-LINK TL-WR741ND v1
 	PACKAGES:=kmod-ath9k wpad-mini

Changed 6 years ago by Pieter "Fate" Hollants <pieter@…>

Slightly revised version of the patches, taking into account juhosg's comments

comment:2 Changed 6 years ago by nbd

  • Resolution set to fixed
  • Status changed from accepted to closed

added in r22353

comment:3 Changed 2 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.