Modify

Opened 5 years ago

Closed 4 years ago

Last modified 22 months ago

#8813 closed defect (obsolete)

pango fails to build

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: packages Version: Trunk
Keywords: Cc:

Description (last modified by jow)

The snap from build log:

make[7]: Entering directory `/home/bas/build/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/pango-1.26.0/pango/opentype'
/bin/sh ../../libtool  --tag=CC   --mode=compile mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I. -I../..  -DHAVE_GLIB -pthread -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr//include/glib-2.0 -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr//lib/glib-2.0/include   -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/include -I/home/bas/build/openwrt-xburst/staging_dir/toolchain-mipsel_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/include -I/home/bas/build/openwrt-xburst/staging_dir/toolchain-mipsel_gcc-4.3.3+cs_uClibc-0.9.30.1/include -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib/libiconv-full/include -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib/libintl-full/include   -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib/libiconv-full/include -I/home/bas/build/openwrt-xburst/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib/libintl-full/include  -Wall -MT libharfbuzz_la-hb-blob.lo -MD -MP -MF .deps/libharfbuzz_la-hb-blob.Tpo -c -o libharfbuzz_la-hb-blob.lo `test -f 'hb-blob.c' || echo './'`hb-blob.c
../../libtool: line 42: -c: command not found
libtool: Version mismatch error.  This is libtool 2.2.6, but the
libtool: definition of this LT_INIT comes from libtool 2.2.6b.
libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6
libtool: and run autoconf again.
make[7]: *** [libharfbuzz_la-hb-blob.lo] Error 63
make[7]: Leaving directory `/home/bas/build/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/pango-1.26.0/pango/opentype'
make[6]: *** [all-recursive] Error 1
make[6]: Leaving directory `/home/bas/build/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/pango-1.26.0/pango'
make[5]: *** [all] Error 2
make[5]: Leaving directory `/home/bas/build/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/pango-1.26.0/pango'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/bas/build/openwrt-xburst/build_dir/target-mipsel_uClibc-0.9.30.1/pango-1.26.0'
make[3]: *** [all] Error 2

Attachments (0)

Change History (4)

comment:1 Changed 5 years ago by jow

  • Description modified (diff)

comment:2 Changed 5 years ago by anonymous

The following change made it work for me (it is not usable, but it might give a hint where to look for the problem):

Index: Xorg/lib/pango/Makefile
===================================================================
--- Xorg/lib/pango/Makefile	(revision 25697)
+++ Xorg/lib/pango/Makefile	(working copy)
 -51,6 +51,12 @@
 CONFIGURE_VARS += \
 	CXX="$(TARGET_CC)"
 
+define Build/Configure
+	cd $(PKG_BUILD_DIR) && \
+	sed -i -e 's/2.2.6/2.2.6b/g' -e 's/1.3012/1.3017/g' ltmain.sh && \
+	$(call Build/Configure/Default)
+endef
+
 define Build/InstallDev
 	$(INSTALL_DIR) \
 		$(1)/usr/lib/pkgconfig \

comment:3 Changed 4 years ago by nbd

  • Resolution set to obsolete
  • Status changed from new to closed

comment:4 Changed 22 months ago by jow

  • Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)

Milestone Backfire 10.03.2 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.